Help Guide (Web manual)

Help Guide

Wireless Noise Canceling Stereo Headset

WF-1000X

Unable to connect the headset to a BLUETOOTH device with one-touch connection

(NFC)

Remove the headset from the charging case and make sure that the headset is turned on.

Keep the smartphone close to the charging case until the smartphone reacts. If you fail to connect, move the

smartphone slowly on the N-Mark of the charging case.

Check that the NFC function of the smartphone is set to on.

If the smartphone is in a case, remove it.

NFC reception sensitivity varies depending on the device. If you repeatedly fail to connect the headset with a

smartphone by one touch, connect it to the headset by on-screen operation on the smartphone.

You cannot make a one-touch connection (NFC) while charging the battery because the headset cannot be turned

on. Finish charging first, and then make the one-touch connection (NFC).