Help Guide (Web manual)

Help Guide

Wireless Noise Canceling Stereo Headset

WF-1000X

Low sound quality

Turn down the volume of the connected device.

Keep the headset away from a microwave oven, Wi-Fi device, etc.

Bring the headset and the BLUETOOTH device closer together. Remove any obstacles between the headset and the

BLUETOOTH device.

Keep the headset away from a TV.

Switch the BLUETOOTH connection to A2DP by operating the BLUETOOTH device when HFP or HSP is set.

If you connect a device with a built-in radio or tuner to the headset, broadcasts may not be received, or sensitivity

may be reduced. Locate the headset farther away from the device and check that you can listen to the broadcasts

satisfactorily.

If you have previously connected the headset to this BLUETOOTH device, only an HFP/HSP BLUETOOTH

connection may be made when the headset is turned on. If this happens, use the BLUETOOTH device and make an

A2DP BLUETOOTH connection.