Help Guide (Web manual)

Hint
If you cannot connect the headset, try the following.
Unlock the screen of the smartphone if it is locked, and move the smartphone slowly over the N-Mark.
If the smartphone is in a case, remove the case.
If you touch an NFC-compatible smartphone with the bottom of the charging case, the smartphone terminates BLUETOOTH
connection with any current device, and connects to the headset (One-touch connection switching).
When the power of the headset is off, you cannot turn on the headset with one-touch connection (NFC) to connect the headset
with the smartphone. To turn the headset on, press and hold the buttons both on the
right and left units for about 2
seconds on until the indicator (blue) flashes.
Related Topic
How to make a wireless connection to BLUETOOTH devices
Disconnecting the smartphone by one touch (NFC)
Switching the device by one touch (NFC)
Listening to music from a device via BLUETOOTH connection
4-724-045-11(4) Copyright 2017 Sony Corporation
Follow the on-screen instructions to complete the pairing and connection.
When the headset is connected with the smartphone, the blue indicator starts flashing slowly. You hear voice
guidance “BLUETOOTH connected”.
To disconnect, touch the smartphone again.
To connect a paired smartphone, perform step 5.
Unlock the screen of the smartphone if it is locked.
26