Operating Instructions
Table Of Contents
- Table of Contents
- Precautions
- Location of Controls
- Connections and Preparations
- Projecting
- Projecting the Picture on the Screen
- Operating the BRAVIA Sync Compatible Equipment with the Remote Control of the Projector
- Selecting the Wide Screen Mode
- Selecting the Picture Viewing Mode
- Adjusting the Picture Quality
- Adjusting the Picture Using Real Color Processing
- Using the Supplied Software to Adjust the Picture Quality (ImageDirector3)
- Using the Menus
- Others
7
Location of Controls
Front/Right Side
You can use the buttons on the control panel with the same names as those on the remote
control to operate the projector.
Location of Controls
INPUT button (1 page 28)
MENU button (1 page 40)
ON/STANDBY
indicator
(1 page 17)
Remote control detector
Ventilation
holes (exhaust)
(1 page 12)
?/1 (ON/STANDBY) switch (1 page 18)
LAMP/COVER
indicator
(1 page 65)
M/m/</, (arrow)/
(enter) button (1 page 40)
Ventilation holes (exhaust) (1 page 12)
- AC IN socket
S VIDEO INPUT connector (mini DIN 4-pin)/VIDEO INPUT
connector (phono type) (1 page 24)
Y P
B/CB PR/CR connector (phono type) (1 page 22)
INPUT A connector (1 page 25)
HDMI 1 connector (1 page 22)
REMOTE
connector
Connects to a
computer, etc.
for remote
control.
(1 page 39)
HDMI 2 connector (1 page 22)
While the ON/STANDBY indicator
lights in orange, the power saving
mode is on. (1 page 53)
Note
Control panel
LENS button
Open button
TRIGGER 1 connector
Outputs 12V signal when the projector is on.
TRIGGER 2 connector
Outputs 12V signal when “Wide Mode” is set to “Anamorphic Zoom”. (1 page 33)
Press the button and open
the cover.
Lens protector