Protocol Manual

VPL-VW50

<Table 1> <Table 2> Remarks

Item Number Data

Item Upper byte Lower byte Data Upper byte Lower byte

Status Error 01h 01h NO ERROR 00h Get only

LAMP ERROR 01h

FAN ERROR 02h

COVER ERROR 04h

TEMP ERROR 08h

D5V ERROR 10h

POWER ERROR 20h

WARNING ERROR 40h

NVM Data ERROR 80h

Status Power 01h 02h STANBY 00h

START UP 01h

STARTUP LAMP 02h

POWER ON 03h

COOLING1 04h

COOLING2 05h

SAVING COOLING1 06h

SAVING COOLING2 07h

SAVING STABY 08h

Lamp Timer 01h 13h USE TIME 0000h-FFFFh

Sircs (15bit category) 17h Refer to Table4 ----- 00h 00h Set only

Sircs (20bit category) 19h Refer to Table5 ----- 00h 00h

*1 Example) In case the lamp timer indicates 1000H, return values are [03h] upper byte and [E8h] lower byte.

*2 It is corresponded to single command only.