D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\00COV_ VPLVW200UC\01COV.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\01REG.fm WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\01REG.fm Disposal of Used Lamp This projector’s lamp should be disposed of properly. Consult your local authorities regarding safe disposal. The material contained in this lamp are similar to those of a fluorescent lamp, so you should dispose of it in the same way. For customers in Europe The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\01REG.fm masterpage:Left For customers in Canada This Class B digital apparatus complies with Canadian ICES-003. For customers in Europe Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\02COVTOC.fm masterpage:Left Table of Contents Precautions .........................................7 Location of Controls Front/Right Side .................................8 Rear/Bottom .......................................9 Remote Control ................................10 Connections and Preparations Unpacking ........................................11 Step 1: Installing the Projector .........12 Before Setting Up the Projector .......
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\02COVTOC.fm masterpage:Left Others About the HDMI Control ................. 59 About the x.v.Color ......................... 59 Troubleshooting ............................... 60 Warning Indicators ..................... 62 Message Lists ............................. 63 Replacing the Lamp and the Air Filter and cleaning the Ventilation holes (intake) ................. 65 Cleaning the Air Filter .....................
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\03CAU.fm masterpage:Left Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. • Unplug the unit from the wall outlet if it is not to be used for several days. • To disconnect the cord, pull it out by the plug.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\04GET.fm masterpage:Left Location of Controls Front/Right Side You can use the buttons on the control panel with the same names as those on the remote control to operate the projector. Press and open the cover.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\04GET.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\04GET.fm masterpage:Left Remote Control Infrared transmitter LIGHT button Illuminates the buttons on the remote control.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Connections and Preparations Unpacking Check the carton to make sure it contains the following items: • • • • • Remote control (1) Size AA (R6) batteries (2) AC power cord (1) ImageDirector3 CD-ROM (1) Plug holder Attach the plug holder to avoid unplugging the AC power cord accidentally. (1 page 14) • Air filter cover (1) This air filter cover is used only when the projector is installed on a ceiling.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Step 1: Installing the Projector The projector displays pictures output from a VCR or other device. The lens shift allows you to have broader options for placing the projector and viewing pictures easily. Installing the projector in such a location may cause a malfunction of the unit due to moisture condensation or rise in temperature.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Improper use Do not do any of the following while using the projector. Ventilation holes (exhaust) Ventilation holes (intake) Tip For details on the location of the ventilation holes (intake or exhaust), see “Location of Controls” on pages 8 to 9. Tilting front/rear and left/right 15° or more Avoid using the projector tilted at an angle of more than 15 degrees.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Connecting the AC Power Cord 1 Plug the AC power cord into the AC IN socket (power connector) of the projector. Then, attach the plug holder to the AC power cord. 2 Slide the plug holder over the cord until it locks. Plug holder AC IN socket AC power cord To remove the AC power cord Pull out the AC power cord while pressing both sides of the lock levers of the plug holder.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Positioning the Projector and a screen 1 Determine the installation position of the projector and screen. You can obtain a good quality picture if you position the projector with the center of the lens within the areas indicated in the gray areas in the illustration. Use the values a, b and c in the table on page 16 as a guide.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm 2 masterpage:Left Position the projector so that the lens is parallel to the screen. Top view Screen Project an image on the screen and adjust the picture so that it fits the screen. (1 page 22) To project an image, connect video equipment to the projector.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Step 2: Connecting the Projector When making connections, be sure to do the following: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable itself.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left To connect to a DVD player/recorder or Blu-ray Disc player equipped with HDMI output Right side of the projector AV amplifier Speakers DVD player/recorder or Blu-ray Disc player, etc., with the HDMI output to HDMI output HDMI cable (not supplied) : Video signal flow When using an optional HDMI cable, be sure to use a cable that has acquired the HDMI logo.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left To connect to a VCR equipped with the S video connector or video connector You can connect a DVD player/recorder, hard disk video recorder, VCR or laser disk player, which is not equipped with component video connectors. See also the instruction manual of each equipment.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Connecting to a Computer Right side of the projector Connections and Preparations Computer to monitor output HD-Dsub15 pin cable (not supplied) or HDMI cable (not supplied) : Video signal flow When using an optional HDMI cable, be sure to use a cable that has acquired the HDMI logo. Tip Set “Input-A Signal Sel.” in the Setup menu to “Auto.” If the input signal does not appear properly, set it to “Computer.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Step 3: Adjusting the Picture Position Project an image on the screen and then adjust the picture position. 1 ON/STANDBY indicator 4 Remote control detector 2 5,6,7 Tip (joystick) buttons on the The ?/1 (ON/STANDBY), INPUT, LENS, MENU, and M/m/
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Turn on the equipment connected to the projector. Refer to the operating instructions of the connected equipment. 4 Press INPUT to project the picture on the screen. Each time you press the button, the input indication and equipment to be projected change. (1 page 28) Tips • You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting the Menu Language”.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left The picture moves up by a maximum of 65% of the screen size from the center of the lens. 120” 971 mm (38 1/4 inches) Side view 100” 809 mm (31 7/8 inches) 65% 80” 647 mm (25 1/2 inches) 1 screen height center of lens (When using the 16:9 screen. For more details, see page 16.) : Picture position when the picture is moved upward at the maximum Tip You can also adjust the horizontal position of the lens.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left 7 Adjust the focus. Press the LENS button repeatedly until the Lens Focus adjustment window (test pattern) appears. Then adjust the focus of the picture by pressing the M/m/
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Step 4: Selecting the Menu Language You can select one of 16 languages for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. 2,3,4 1 1 Press MENU. The menu appears.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\05PRE.fm masterpage:Left Press M/m to select the Setup menu, and press , or . The setting items of the selected menu appears. 3 Press M/m to select “Language,” and press , or . 4 Press M/m/
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left Projecting This section describes how to operate the projector to view the picture from the equipment connected to the projector. It also describes how to adjust the quality of the picture to suit your taste. Projecting the Picture on the Screen 1 Power on both the equipment and the device connected to the equipment. 2 Press INPUT repeatedly to select the input you want to project on the screen.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left Tips • When “Auto Input Search” is set to “On” in the Function menu, the input terminal with effective signals is automatically displayed by pressing INPUT. • When the “HDMI Control” is set to “On” in the Function menu, the input terminal with effective signals is automatically displayed, synchronizing with the operation of the equipment connected to HDMI 1 or HDMI 2 input of the projector.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left Selecting the Wide Screen Mode You can enjoy various wide screen modes according to the video signal received. Press WIDE MODE. Each time you press the button, you can select the “Wide Mode” setting. You can also select it using the menu. (1 page 46) WIDE MODE button Original image When the Wide Mode is operated Wide Zoom A 4:3 aspect ratio picture is enlarged over the entire screen properly.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left Letterbox picture with side panels Zoom Letterbox picture Anamorphic Zoom When using an Anamorphic lens A 2.35:1 aspect ratio picture is converted to a normal 16:9 picture on the screen. This mode is best suited when using a commercially available Anamorphic lens which converts a normal 16:9 aspect ratio picture to a 2.35:1 picture.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of program or room conditions. Press one of the PICTURE MODE buttons (DYNAMIC, STANDARD, CINEMA and USER 1, USER 2 and USER 3). DYNAMIC Enhances picture contrast and sharpness.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left Adjusting the Picture Quality You can easily adjust the picture quality that suits your taste by selecting the adjustment items with the remote control. The adjusted data can be stored in each picture mode. Projecting Selecting to directly adjust the desired menu item COLOR SPACE button COLOR SPACE button Adjusts the range of color reproduction on the screen.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left Selecting desired adjust menu items in the order 1 Press ADJUST PICTURE. Each time you press the button, the following adjustment windows are displayed in sequence. 1 2 For details on each adjustment, see the Picture menu. (1 page 41) Note Some adjustment windows cannot be displayed, depending on the type of input signal.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left Adjusting the Picture Using Real Color Processing Tip Freeze the scene of the video source when you are adjusting the picture using Real Color Processing. 1 1 Press RCP on the remote control. 2 Press M/m to select “User1,” “User2” or “User3,” then press ,. The RCP (Real Color Processing) window appears. 3 Select the target color you want to adjust.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\06PRO.fm masterpage:Left 2 Press M/m to select “Position” or “Range,” and specify it more delicate color position and color range you want to adjust using
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Using the Menus This section describes how to make various adjustments and settings using the menus. Operation through the Menus RESET button 2, 3, 4 1 37 VPL-VW200 3-275-583-13 (1) Using the Menus The projector is equipped with an on-screen menu for making various adjustments and settings.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left 1 Press MENU. The menu window appears. 2 Press M/m to select a menu item, and press , or . The items that can be set or adjusted with the selected menu appear. The item presently selected is shown in yellow.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm 3 masterpage:Left Press M/m to select an item you want to set or adjust and press , or . The setting items are displayed in a pop-up menu, in a setting menu, in an adjustment menu or in the next menu window.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm 4 masterpage:Left Make the setting or adjustment of an item. To reset the items that have been adjusted When changing the adjustment level Select an item in the Menu screen, and display the pop-up menu, the setting menu, and the adjustment menu. Press the RESET on the remote control to reset only the selected settings to its factory preset value. To increase the value, press M/,. To decrease the value, press m/<.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Picture Menu The Picture menu is used for adjusting the picture. Using the Menus Picture Mode You can select the picture viewing mode that best suits the type of picture or the environment. Dynamic: Select this for enhanced picture contrast and sharpness to reproduce color tones. Standard: Select this to reduce roughness compared to viewing the picture with “Dynamic”. Cinema: Select this for watching movies, etc.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm Motionflow masterpage:Left Film Projection Reproduces movies in its original moving picture. Mode1: Best suited for watching movies. Mode2: Suited for watching movies. The picture is brighter than in “Mode1”. Mode3: Suited for watching movies. The picture is brighter than in “Mode2”. Off: Normal picture. Note When you select “Mode1”or “Mode2”, the picture will become slightly darker than in “Off”.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm Expert Setting masterpage:Left NR (Noise Reduction) Reduces the roughness or noise of the picture. Usually, select “Off”. If the picture is rough or noisy, select a setting from among “Low”, “Middle” or “High” according to the input signal source. Note Depending on the input signal, the picture quality of “Mode1”and “Mode2” may not differ.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Gamma Correction Adjusts the response characteristics of the tone of the picture. Select a favorite tone from three options. Gamma1: Makes a scene a little brighter. Gamma2: Makes a scene brighter. Gamma3: Makes a scene darker. Off: Gamma Correction is “Off” Using the specified controller, “ImageDirector3” (supplied as a CD-ROM) allows you to adjust, set, and store a favorite tone in a computer.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Advanced Picture Menu The Advanced Picture is used for adjusting the picture more. Using the Menus RCP (Real Color Processing) You can adjust the color and hue of each selected portion of the picture independently. User1, User2, User3: You can adjust the picture using Real Color Processing and store the settings. Once the settings are stored, you can view the picture with the adjusted picture quality.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Screen Menu The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc. . Wide Mode (When the You can set the aspect ratio of the picture to be displayed for the image input signal is current input signal. This item is enabled only when an image signal input) (preset memory numbers 1 to 14) (1 page 73, 74) is input.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm Screen Area masterpage:Left Selects the size of the picture when a Hi-Vision picture is overscanned. Full: Expands the picture on the whole of the screen. Through: Does not expands the picture on the whole of the screen. Note This item is effective only when a Hi-Vision signal (preset memory No. 7, 8, 9, 12, 13 and 14) is input and “On” is selected in “Over Scan”.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Setup Menu The Setup menu is used to change the factory preset settings, etc. Status Sets whether or not the on-screen display is displayed. Set to “Off” to turn off the on-screen displays except for the menus, message when turning off the power, and warning messages. Language Selects the language used in the menu and on-screen displays.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm Input-A Signal Sel. masterpage:Left Selects the type of signal input from the equipment connected to the INPUT A connector. Selects the type of signal input from the equipment by selecting “Input-A” with the INPUT button. Auto: Selects the input signal type automatically. Computer: Inputs the signal from a computer. Video GBR: Inputs the signal from a TV game.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Function Menu The Function menu is used for changing the settings of the various functions of the projector. HDMI Control Selects the function whether to turn the HDMI Control function effective, when the HDMI 1 INPUT and HDMI 2 INPUT connectors are connected to a HDMI control compatible equipment.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm Test Pattern masterpage:Left Displays the test pattern. When set to “On,” a test pattern appears on the screen to be used when adjusting the lens with “Lens Focus,” “Lens Zoom,” and “Lens Shift,” or correcting the screen proportions with “V Keystone.” A test pattern does not appear when this item is set to “Off.” Tip While the test pattern is displayed, it is only displayed in green to allow you to adjust the focus easily.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Installation Menu The Installation menu is used for changing the installation settings. V Keystone Corrects the vertical trapezoidal distortion of the picture. When the bottom of the trapezoid is longer than the top ( Sets a lower value (– direction) When the top of the trapezoid is longer than the bottom ( Sets a higher value (+ direction).
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm Blanking masterpage:Left This feature allows you to adjust the displayable region within the four directions of the screen. Select each screen edge “Left / Right / Top / Bottom” on the Blanking adjustment screen with M / m buttons. Adjust the desired Blanking value with < / , button. Panel Alignment This feature allows you to adjust the gaps in the color of characters or the picture.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Set the amount to adjust with < / , buttons for the horizontal direction (H direction) and with M / m buttons for the vertical direction (V direction). You can select the position to adjust again by pressing . Reset: Returns to the factory settings. Note Depending on the adjustments made above, colors may become uneven or the resolution may change.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\07MEN.fm masterpage:Left Information Menu The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp. Model name: VPL-VW200 Serial No. Memory No. Using the Menus Signal type Model Name Displays the model name (VPL-VW200). Serial No. Displays the serial number.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\080COM.fm masterpage:Left Operating the Projector from a Computer Accessing the Projector from a Computer You can check the present status of the projector on a computer display and control the projector from a computer. Confirm that the projector and computer are connected to the router/hub with the LAN cables, then turn on the projector, computer and router/hub. 1 2 Start Internet Explorer 5.0 (or later version) on your computer.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\080COM.fm masterpage:Left Operating the Projector Setting the Information Click “Control.” You can perform various adjustments and settings of the projector on a computer display. The functions of the buttons in the windows are the same as those on the remote control supplied with the projector. Click “Setup.” The Password Properties dialog box appears. The name of the “User” account is preset without a password to “root” at the factory.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\080COM.fm masterpage:Left Setting passwords for “Administrator” and “User” Click “Password.” You can set passwords for each “Administrator” and “User.” The name of the “Administrator” account is preset to “root” at the factory. It cannot be changed. Advanced setting Click “ADVANCED MENU” to display the Advertisement button, PJ Talk button, SNMP button and Reset button. These settings are mainly for professional use.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Others This section describes about the other functions, how to solve the problems, how to replace the lamp and air filter, etc. About the HDMI Control What is the HDMI Control? Connecting a HDMI control compatible equipment Connect the projector with an HDMI control compatible equipment using an HDMI cable. Be sure to use a cable that has acquired the HDMI logo for your connection.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony personnel. Power Symptom The power is not turned on. Cause and Remedy c After about one minute, turn the power on. c Close the lamp cover securely, then tighten the screws securely.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm Symptom masterpage:Left Cause and Remedy The picture flickers. c Activate “APA”, then adjust the current input signal. c Adjust “Phase” for “Adjust Signal” in the Screen menu properly. (1 page 47) The color of characters or the picture is not appropriate. c Select the desired color registration in “Panel Alignment” of Installation menu (1 page 53).
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Warning Indicators The ON/STANDBY or LAMP/COVER indicator lights up or flashes if there is any trouble with your projector. ON/STANDBY indicator LAMP/COVER indicator Symptom Cause and Remedy LAMP/COVER flashes in red. (A repetition rate of 2 flashes) c Close the lamp cover securely, then tighten the screws securely. (1 page 67) c Close the filter holder securely. (1 page 69) LAMP/COVER flashes in red.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Message Lists Warning messages Message Cause and Remedy c Turn off the power. c Check to ensure that nothing is blocking the ventilation holes. (1 page 13) Frequency is out of range! c Frequency is out of range. Input a signal that is within the acceptable frequency range of the projector. Please check Input-A Signal Sel. c Set “Input-A Signal Sel.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Caution messages Message Cause and Remedy x c No signal is input in the selected input. Check connections. (1 page 18) Not applicable! c Press the appropriate button. c The operation to be activated by the button is currently prohibited.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm Replacing the Lamp and the Air Filter and cleaning the Ventilation holes (intake) Caution • The lamp remains hot after the projector is turned off with the ?/1 (ON/STANDBY) switch. If you touch the lamp, you may burn your fingers. When you replace the lamp, wait for at least an hour for the lamp to cool. • Do not touch the surface of the lens. If you touch it, wipe off the fingerprints with a soft cloth.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm 5 Remove the valve cap (1), then turn the gas releasing valve clockwise, using a Philips screwdriver (2). Valve cap masterpage:Left 6 Loosen the four screws on the lamp unit with a Philips screwdriver. 7 Hold the lamp unit with your hand, and then, pushing the lamp release lever toward the arrow direction (toward the right), pull the lamp unit straight out.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm 8 Insert the new lamp unit straight in all the way until it is securely in place and you hear it click. 9 masterpage:Left Tighten the four screws loosened in step 6 to secure the lamp unit to the projector. Others 10 Tighten the screw loosened in step 4 to close the lamp cover. Notes • Insert the new lamp unit while holding it tightly, because it is heavy (approx. 2.9 kg (6 lb 6 oz)). Dropping the lamp may result in an injury.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm 12 Reverse the projector, then masterpage:Left 14 Remove the air filter. place it on the cloth. Claws Note Be sure that the projector is placed on a stable surface. 13 Remove the filter holder. 15 Attach the new air filter so that it fits into the each claws (5 positions) on the filter holder. Note Attach the Air Filter aligning it with the shape of the filter holder.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left 17 Be careful not to let dust near the Ventilation holes (intake) go inside the inner part of the projector when cleaning. Ventilation holes (intake) original position. 19 Turn on the projector, then select the desired setting item on the Setup menu. The menu screen below will be appeared. Note The disposal rules for used fluorescent tubes depend on where you live. Follow the waste disposal policy in your area.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm Cleaning the Air Filter When “Please clean the filter.” appears on the screen, you should clean the air filter. The air filter should be cleaned every 1,250 hours. This value varies depending on the environment or how the projector is used. 1,250 hours are approximate. Clean the air filter with a vacuum cleaner. If the dust still remains, wash the air filter with a mild detergent solution and dry it in a shaded place.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm Specifications System Input Video input VIDEO: phono type Composite video: 1 Vp-p±2 dB sync negative (75 ohms terminated) S VIDEO: Y/C mini DIN 4-pin type Y (luminance): 1 Vp-p±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vpp ±2 dB (NTSC) (75 ohms terminated), or burst 0.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Supplied accessories Remote control RM-PJVW200 (1) Size AA (R6) batteries (2) AC power cord (1) Plug holder (1) Lens Cap (1) Operating Instructions (1) CD-ROM (ImageDirector3) (1) Air Filter Cover (1) Design and specifications are subject to change without notice.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Warning on power connection Use a proper power cord for your local power supply.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm Memory No. Preset signal (resolution) fH (kHz) fV (Hz) Sync masterpage:Left H Size 9 1080/24PsF 1080/48i (1920 × 1080i) 27.000 48.000 SonG/Y – 10 720/60p 720/60p (1280 × 720p) 45.000 60.000 SonG/Y – 11 720/50p 720/50p (1280 × 720p) 37.500 50.000 SonG/Y – 12 1080/60p 1080/60p (1920 × 1080p) 67.500 60.000 – – 13 1080/50p 1080/50p (1920 × 1080p) 56.260 50.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm Memory No. Sync masterpage:Left Preset signal (resolution) fH (kHz) fV (Hz) H Size 50 1400 × 1050 SXGA + 65.317 59.978 H-neg, V-pos 1864 55 1280 × 768 1280 × 768/60 47.776 59.870 H-neg, V-pos 1664 56 1280 × 720 1280 × 720/60 44.772 59.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Input Signals and Adjustable/Setting Items The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted are not displayed in the menu.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Ceiling Installation Use the PSS-H10 Projector Suspension Support when you install the projector on a ceiling. The projection distances for ceiling installation are shown below. Also, attach the supplied air filter cover for the ventilation holes (intake) to prevent the air filter from becoming clogged with dust.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Attaching the PSS-H10 projector suspension support For details on installation on a ceiling, refer to the Installation manual for Dealers of the PSS-H10. Make sure to consult with a qualified Sony personnel for installation. The installation measurements are shown below when installing the projector on a ceiling using the PSS-H10.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left Making Fine Adjustments to the Horizontal Picture Position Tools you need to get started Phillips screwdriver: 110 mm (4 3/8 inches) or longer Flat-head screwdriver: 110 mm (4 3/8 inches) or longer Note For details on how to make fine adjustments of the horizontal picture position, consult with qualified personnel. When the lens is scratched, there is a charge for repair.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm 3 masterpage:Left Insert a flat-blade screwdriver into the lens adjustment groove located at the left bottom (when the projector projects the image when placed on the floor, on a desk, etc.), and turn it in the direction in which you want to move the lens. If you turn it to the left, the lens moves to the left, and if you turn it to the right, the lens moves to the right. (The range of movement is approximately ± 1mm.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\09OTH.fm masterpage:Left 4 After you have decided the lens position, insert the Philips screwdriver at the locations of the four screws around the border of the lens in turn and tighten them to fix the lens in place. 5 Attach the ring (washer) aligning the F mark on the inside of the ring with the F mark on the projector by turning it clockwise.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\01COVIX.fm Index A Adjust Signal Phase ....................................................47 Pitch .....................................................47 Shift .....................................................47 Adjuster ...................................................25 Adjusting picture position ....................................22 picture quality ......................................33 Advanced Iris ............................
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\01COVIX.fm masterpage:Left R RCP ......................................................... 45 Remote control inserting the batteries .......................... 11 location of controls .............................. 10 Reset resettable items .................................... 40 resetting the items ............................... 40 S Screen Area ............................................. 47 Selecting the menu language .................
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\010GB_ VPLVW200UC\01COVIX.
D:\WORK\VW60GB\3275583131\3275583131VPLVW200UC\00COV_ VPLVW200UC\02BCO.fm masterpage:Back Cover Printed on 70% or more recycled paper.
