Operating Instructions

18 (GB)
Connecting the Projector / Selecting the Menu Language
Selecting the Menu Language
You can select the language to be used in the menu
and other on screen display. The factory setting is
ENGLISH.
1 Plug the AC power cord into the wall outlet.
2 Press the I / 1 key to turn on the power.
3 Press the MENU key.
The menu display appears.
4 Select the icon of the SET SETTING menu, the
third one, using the M or m key, then press the ,
or ENTER key.
The SET SETTING menu appears.
LAMP/
COVER
TEMP/
FAN
POWER
SAVING
ON/
STANDBY
MENU
LIGHT
VIDEO MEMORY
ENTER
PATTERN
RESET
INPUT
2
4, 5, 6
3
1
SET SETTING
STATUS: ON
INPUT-A: COMPONENT
INPUT-B: COMPONENT
LANGUAGE: ENGLISH
POWER SAVING: OFF
SIRCS RECEIVER: FRONT&REAR
CINE MOTION: AUTO
INPUT-A
CONTROL S IN VIDEO IN
TRIGGER
REMOTE
INPUT A
INPUT B
PLUG IN POWER
RS-232C
(FOR SERVICE USE)
S VIDEO
G/Y B/C
B /P B R/C R/ P R SYNC/HD VD
VIDEO
G/Y B/C B /P B R/C R/ P R SYNC/HD VD
When connecting a computer
Left side
to
monitor
output
Computer
Monitor cable
SMF-400
(not supplied)
Speakers
a) When connecting INPUT A or INPUT B connectors on the
projector, you need conversion plugs (BNC t phono).
Conversion plugs
a)
PICTURE CTRL
CONTRAST: 80
BRIGHT: 50
RGB ENHANCER: 30
COLOR TEMP: HIGH
INPUT-A
To connect a Macintosh computer
When connecting a video output connector that has a
two-line pin configuration, use the appropriate adaptor
for that type of connector (not supplied).