Operating Instructions

74
5 Loosen the 3 screws on the
lamp with the Phillips
screwdriver. Hold up the handle,
then pull the lamp straight out.
Hold the lamp by the handle to remove and
attach it.
6 Push in the new lamp by the
handle securely until it reaches
the end, and then tighten the 3
screws.
Be careful not to touch the optical block
inside the unit.
7 Close the lamp door, (inner
cover) and then tighten the
screw.
8 Close the lamp cover.
9 Wipe dust off the ventilation
holes (intake) with a soft cloth.
Note
Handle
Note
Ventilation holes (intake)