Operating Instructions

Caution messages

Power Saving Mode is set.

Projector lamp will

automatically cutoff in 1

minute.

c “Power Saving” is set to “Lamp Cutoff.” (1 page 51)

If no signal is input, the lamp turns off after 1 minute.

Power Saving Mode is set.

Projector will

automatically enter

Standby Mode in 1 minute.

c “Power Saving” is set to “Standby.” (1 page 51)

If no signal is input, the power turns off after 1 minute, and the

projector goes into standby mode.

Message Cause and Remedy

c No signal is input in the selected input. Check connections

(1 page 22).

Not applicable! c Press the appropriate button.

c The operation to be activated by the button is currently

prohibited.

Message Cause and Remedy

Note