Operating Instructions

Step 2: Connecting the Projector

Connections and Preparations

Tip

Set “Input-A Signal Sel.” or “DVI Signal Sel.” in the Setup menu to “Auto” or

“Computer.” If the input signal does not appear properly, set it to “Computer.” (1 page

53)

If you set your computer, such as a notebook type, to output the signal to both your

computer’s display and an external monitor, the picture of the external monitor may not

appear properly. Set your computer to output the signal to only the external monitor.

For details, refer to the computer’s operating instructions supplied with your computer.

Connecting to a Computer

Note

HD D-sub 15-pin cable (not supplied),

or DVI - DVI cable (not supplied)

: Video signal flow

Right side of the projector

to monitor output

Computer