Operating Instructions

Step 2: Connecting the Projector

When making connections, be sure to do the following:

• Turn off all equipment before making any connections.

• Use the proper cables for each connection.

• Insert the cable plugs properly; plugs that are not fully inserted often

generate noise. When pulling out a cable, be sure to pull it out from the plug,

not the cable itself.

• Refer to the operating instructions of the connected equipment.

To connect to a DVD player/recorder or digital tuner equipped with

component video connectors

Tip

To connect the projector to a DVD player/recorder, HDD recorder, digital tuner, etc.

which is not equipped with component video connectors, it is recommended to use the

S video cable to connect to the S-video output of the DVD player/recorder, HDD

recorder, digital tuner, etc. If the connected equipment is not equipped with the S-video

output connector, use the video cable to connect to the video output jack on the

equipment.

Connecting to a DVD Player/Recorder or Digital Tuner

PB/

PR/

CB/

CR/PR

S VIDEO

VIDEO

INPUT

YCB/PB CR/PR INPUT A

Component video cable (not supplied)

: Video signal flow

DVD player/recorder, HDD

recorder, digital tuner, etc.,

with component video

connectors

Right side of the projector

AV amplifier

Speakers