Specifications

GB
6 Precautions
• Do not use the Security bar for the purpose
of preventing theft for transporting or
installing the unit. If you lift the unit by the
Security bar or hang the unit by this bar, it
may cause the unit to fall and be damaged,
and may result in personal injury.
For dealers
• Make sure the projector is installed on the
wall securely; otherwise, it may fall and
cause death or serious injury. Be sure to
use Sony’s Projector Wall Mount.
• Be sure to secure the cabinet cover firmly
when installing to the wall firmly.
• Never mount or move the projector by
yourself. Be sure to consult with your
Sony dealer.
• When installing the unit on a wall or
ceiling, be sure to use a safety wire, etc., to
prevent the unit from falling. Entrust the
installation to an experienced contractor or
installer.
• Before installing the unit on a wall or
ceiling, make sure that the mounting
surface is strong enough.
If you install the unit without first
confirming that the mounting surface is
strong enough, the unit may fall.
• When installing the unit, leave space
between any walls, etc. and the unit as
illustrated.
• Avoid using if the unit is tilted more than
15 degrees horizontally.
• Always install the unit horizontally or
vertically. Otherwise the projected image
may be unevenly colored or the lamp life
may be deteriorated.
Safety precautions for
installing the unit
On Installation
More than 10 cm
(4 inches)
More than
30 cm
(11
7
/8
inches)
More than
30 cm
(
11
7
/8
inches)
15°
15°
Horizontal installation
Right Side Up
Upside Down
Vertical installation
Front Up
(Projects
downward)
Front Down
(Projects
upward)