User Guide

3
GB
1
2
3
4
GB
Table of Contents / Notes on Use
Note on the Power Cord
Use a proper power cord for your local power supply.
Plug type VM0233 290B YP-12A COX-07 _
1)
YP332
Connector type VM0089 386A YC-13B COX-02 VM0310B YC-13
Cord type SJT SJT H05VV-F H05VV-F N13237/CO-228 VCTF
Rated voltage/ 10A/125V 10A/125V 10A/250V 10A/250V 10A/250V 7A/125V
Current
Safety approval UL/CSA UL/CSA VDE VDE VDE DENAN
Cord length 4.5 m (14 feet 9 inches) —
(max.)
1) Use an appropriate rating plug which is applied to local regulations.
Table of Contents
About the Quick Reference Manual ...... 2
Using the CD-ROM Manuals ................ 2
Notes on Use.......................................... 3
Note on the Ventilation Holes ............... 3
Note on the Power Cord .................. 3
Projecting............................................... 4
Connecting the Projector ................. 4
Projecting......................................... 6
Adjusting the Projector .................... 7
Turning off the Power ..................... 7
Replacing the Lamp............................... 8
Cleaning the Air Filter ........................... 9
Troubleshooting................................... 11
Specifications ...................................... 13
Notes on Use
Note on the Ventilation Holes
Do not block ventilation holes (exhaust/
intake). If they are blocked, internal heat
may build up and cause fire or damage to
the unit.
Check the positions of the ventilation holes
shown in the following illustrations.
For other precautions, read the separate
“Safety Regulations” carefully.
1 Ventilation holes (exhaust)
2 Indicators
3 Remote control detector
4 Ventilation holes (intake)
The United States,
Canada
Japan
UK, Ireland,
Australia, New
Zealand
Continental Europe