N User Guide Personal Computer VG N - S Z s e ri e s
n 2 N Contents Before Use .........................................................................................................................................................................6 Notice ...........................................................................................................................................................................6 ENERGY STAR ..........................................................................................................................
n 3 N Using the Internet.......................................................................................................................................................60 Using Wireless LAN (WLAN) .....................................................................................................................................61 Using the Bluetooth Functionality ..............................................................................................................................
n 4 N Upgrading Your VAIO Computer....................................................................................................................................149 Adding and Removing Memory................................................................................................................................150 Precautions ....................................................................................................................................................................
n 5 N Printing .....................................................................................................................................................................201 Microphone ..............................................................................................................................................................202 Mouse ....................................................................................................................................................
n 6 N Before Use Before Use Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal computing. Notice © 2006 Sony Corporation. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
n 7 N Before Use ENERGY STAR As an ENERGY STAR Partner, Sony has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and their office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
n 8 N Before Use Documentation Your documentation includes printed information and user guides to read on your VAIO computer. Guides are provided in PDF format, which you can easily browse through and print out. The My Club VAIO portal is a perfect starting point to use your computer — a comprehensive collection of everything you need to get the most from your computer.
n 9 N Before Use Printed Documentation ❑ A Setting Up Poster — Describes the process from unpacking to starting up your VAIO. ❑ Troubleshooting Guide — Contains solutions to common problems. ❑ Recovery Guide — Contains an explanation of how to recover your computer's system if you need to.
n 10 N Before Use My Club VAIO In My Club VAIO you can find: Documentation, which gives you: ❑ Access to the User Guide. This manual explains the features of your computer in detail, how to use these features confidently and safely, connect peripheral devices and more. ❑ Access to Help & Training. This is the portal of VAIO Help and Support Center. ❑ Important information about your computer, in the form of notices and announcements.
n 11 N Before Use Help and Support Center Help and Support Center is a comprehensive resource for practical advice, tutorials, and demonstrations to help you learn to use Microsoft Windows XP and your computer. Use the Search feature, Index, or table of contents to view all Windows Help resources, including those that are on the Internet. To access Help and Support Center, click Start and then Help and Support. Or go to the Help and Support Center by pressing the Microsoft Windows key and the F1 key.
n 12 N Before Use Ergonomic Considerations You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments: ❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touch pad, or external mouse.
n 13 N Before Use ❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well. ❑ Lighting – Choose a location where windows and lights do not create glare and reflection on the display. Use indirect lighting to avoid bright spots on the display.
n 14 N Getting Started Getting Started This section describes how to get started with using your VAIO computer.
n 15 N Getting Started Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages. ! Please note that the illustrations in this manual may not necessarily apply to your model. Front A Built-in MOTION EYE camera* (page 35) B Built-in MOTION EYE camera indicator* (page 21) C D E F G Built-in microphone (monaural)* LCD screen (page 158) Built-in speakers Keyboard (page 31) Touch pad (page 33) H Fingerprint sensor* (page 111) * On selected models only.
n 16 N Getting Started A B C D Power indicator (page 21) E F G H I J K L M N Bluetooth indicator* (page 21) * On selected models only.
n 17 N Getting Started Back A B C D DC IN port (page 23) Battery connector (page 24) Air vents Security slot
n 18 N Getting Started Right A B C D Optical disc drive (page 36) Optical disc drive indicator (page 21) Manual eject hole (page 194) Drive eject button (page 36) E ExpressCard™/34 slot*1 (page 48) F Hi-Speed USB (USB 2.0) ports*2 (page 95) G Network (Ethernet) port (page 101) H Modem port (page 60) *1 Referred to as the ExpressCard/34 slot hereinafter. *2 Supports high-/full-/low- speeds.
n 19 N Getting Started Left A Microphone jack (page 94) B Headphones jack (page 86) C Air vents D E F G H i.LINK® (IEEE 1394) S400 port (page 99) Monitor (VGA) port (page 88) PC Card slot (page 45) PC Card release button (page 47) Memory Stick Duo/PRO Duo media indicator (page 21) I Memory Stick Duo/PRO Duo media slot* (page 54) * Your computer supports Memory Stick Duo media and Memory Stick PRO Duo media with high speed and high capacity capabilities.
n 20 N Getting Started Bottom A Docking station connector (page 78) B Air vents
n 21 N Getting Started About the Indicator Lights Your computer is equipped with the following indicator lights. Indicator Functions Power 1 Illuminates when the power of the computer is on, blinks in Standby mode, and turns off when the computer is in Hibernate mode or off. Battery e Illuminates when the computer is using battery power, blinks when the battery is running out of power, and double-blinks when the battery is charging.
n 22 N Getting Started Indicator Functions Press the Scr Lk key to change how you scroll the display. Normal scrolling resumes when the Scroll lock indicator is off. The Scr Lk key functions differently depending on the program you are using and does not work with all programs. Scroll lock Bluetooth technology * WIRELESS LAN * On selected models only. Illuminates when the WIRELESS switch is set to ON and Bluetooth technology is enabled. Illuminates when the wireless LAN function is running.
n 23 N Getting Started Connecting a Power Source You can use either an AC adapter or a rechargeable battery pack as a power source for your computer. Using the AC Adapter ✍ Use the computer only with the supplied AC adapter. To use the AC adapter 1 Plug one end of the power cord (1) into the AC adapter (3). 2 Plug the other end of the power cord into an AC outlet (2). 3 Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the computer or on the optional docking station.
n 24 N Getting Started Using the Battery Pack The battery pack supplied with your computer is not fully charged at the time of purchase. Installing the Battery Pack To install the battery pack 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery lock switch (1) to the UNLOCK position. 3 Slide the battery into the battery compartment until it clicks into place. 4 Slide the battery lock switch (1) to the LOCK position to secure the battery on the computer.
n 25 N Getting Started ✍ When the computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet. ! Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this notebook only functions with genuine Sony batteries designed for this model. When inserting another kind of battery, the battery will not be charged and the notebook will not function.
n 26 N Getting Started Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of purchase. To charge the battery pack 1 Install the battery pack. 2 Connect the AC adapter to the computer. The computer automatically charges the battery (the battery indicator light flashes in a double blink pattern as the battery charges). When the battery is about 85% charged, the battery indicator turns off.
n 27 N Getting Started ✍ When the battery is running out of power, both the battery and power indicator lights blink. Keep the battery pack in the computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer. If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery or shut down the computer and install a fully charged battery.
n 28 N Getting Started Removing the Battery Pack ! You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while the computer is in Standby mode. To remove the battery pack 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery lock switch (1) to the UNLOCK position. 3 Slide and hold the battery release latch (2) and slide the battery away from the computer.
n 29 N Getting Started Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer 1 Turn off any peripherals connected to the computer. 2 Click Start and then Turn Off Computer. The Turn off computer window appears. 3 Click Turn Off. 4 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically. The power indicator light turns off.
n 30 N Using Your VAIO Computer Using Your VAIO Computer This section describes how to get the most out of using your computer.
n 31 N Using Your VAIO Computer Using the Keyboard Your keyboard is very similar to a desktop computer keyboard, but has additional keys that perform model-specific tasks. The VAIO-Link web site (www.vaio-link.com) also contains glossary information to help you use the keyboard. Combinations and Functions with the Fn Key ✍ Some functions are not available until Windows is launched. Combinations/Feature Functions Fn + % (F2): speaker switch Turns on and off the built-in speakers and the headphones.
n 32 N Using Your VAIO Computer Combinations/Feature Fn + (F10): zoom Functions Changes the screen resolution to magnify/restore your computer's screen view. ✍ The default resolutions of the standard view and the magnified view are as follows: Standard view: 1280 x 800 pixels Magnified view: 1024 x 600 pixels The magnified view is not as clear as the standard view, as it is implemented by applying a lower resolution to the computer screen with a higher resolution.
n 33 N Using Your VAIO Computer Using the Touch Pad The keyboard contains a cursor-pointing device, the touch pad (1). You can point to, select, drag, and scroll objects on the screen using the touch pad. Action Description Point Slide one finger on the touch pad to place the pointer (2) on an item or object. Click Press the left button (3) once. Double-click Press the left button twice. Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.
n 34 N Using Your VAIO Computer Using Special-function Buttons Your computer is equipped with special buttons to help you use specific functions of the computer. Special-function button S1/S2 buttons Functions By default, the S1 button launches VAIO Help and Support Center and the S2 button lowers the CPU speed to reduce the fan noise. You can change these button assignments on the window for changing the S button assignments.
n 35 N Using Your VAIO Computer Using the Built-in MOTION EYE Camera Your computer may be equipped with a built-in MOTION EYE camera. See the online Specifications to find whether your model is equipped with the built-in MOTION EYE camera. The built-in MOTION EYE camera adds video functionality to instant messaging software and video editing software, for example Windows Messenger and Windows MovieMaker.
n 36 N Using Your VAIO Computer Using the Optical Disc Drive Your computer is equipped with an optical disc drive. To insert a disc 1 Turn on the computer. 2 Press the drive eject button (1) to open the drive. The tray slides out. 3 Place a disc in the middle of the tray with the label side facing up and gently push it until the disc clicks into place.
n 37 N Using Your VAIO Computer 4 Close the tray by pushing it in gently. ! Do not remove the optical disc when the computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction. ✍ If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program.
n 38 N Using Your VAIO Computer Reading and Writing CDs and DVDs Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive supports.
n 39 N Using Your VAIO Computer ! This product is designed to playback discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Please be aware that the audio side (non-DVD side) of a DualDisc may not play on this product because it does not conform to the CD Standard.
n 40 N Using Your VAIO Computer Notes on writing data to a disc ❑ To make the data on a disc readable on an optical disc drive, you need to close the session before you eject it. To complete this process, follow the instructions included with your software. ❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive. ❑ Do not strike or shake the computer while writing data to a disc.
n 41 N Using Your VAIO Computer Notes on playing DVDs To achieve optimum performance when playing DVDs, you should follow these recommendations. ❑ You can play DVDs using the optical disc drive and the DVD playback software, such as VAIO Zone or WinDVD. See the help file on such software for details. ❑ Close all open applications before playing a DVD movie. ❑ Do not use memory-resident utility software to speed up disc access when playing a DVD. This may cause the computer to malfunction.
n 42 N Using Your VAIO Computer Playing CDs To play an audio CD 1 Insert a disc into the optical disc drive. 2 If nothing appears on the desktop, then click Start, point to All Programs, and click to open a CD program, such as the SonicStage software. If the Audio CD window appears, click to select an option.
n 43 N Using Your VAIO Computer Copying Files to CDs See the online Specifications to find the type of your optical disc drive, and then Reading and Writing CDs and DVDs (page 38) to find about the supported disc media. To copy files to a disc ! Do not strike or shake the computer while writing data to a disc. 1 Insert a blank disc into the optical disc drive. If the CD Drive window appears, click Take no action and then click OK. 2 Right-click Start and then click Explore.
n 44 N Using Your VAIO Computer Playing DVDs To play a DVD 1 Close all open programs. 2 Insert a DVD into the optical disc drive. 3 If nothing appears on the desktop, then click Start, point to All Programs, and click to open a DVD program to play the DVD. For instructions on how to use a program, see the help file included with the DVD program. Copying Files to DVDs The DVD writing function is available on selected models only.
n 45 N Using Your VAIO Computer Using PC Cards PC Cards allow you to connect portable external devices to your computer. Inserting a PC Card ! Some PC Cards or their functions may not be compatible with the computer. You do not need to shut down the computer before inserting or removing a PC Card. To insert a PC Card 1 Push the PC Card release button so that the release button pops out. 2 Push the PC Card release button a second time so that the PC Card slot protector pops out.
n 46 N Using Your VAIO Computer ! Insert the PC Card slot protector to protect against debris entering the slot when not using a PC Card. Before moving the computer, make sure to insert the PC Card slot protector into the slot. ✍ Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode.
n 47 N Using Your VAIO Computer Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. To remove a PC Card ✍ To remove a PC Card when the computer is off, skip steps 1 to 6. 1 Double-click the Safely Remove Hardware icon on the taskbar. The Safely Remove Hardware window appears. 2 Select the hardware you want to unplug. 3 Click Stop. The Stop a Hardware Device window appears.
n 48 N Using Your VAIO Computer Using the ExpressCard Media Your computer is equipped with an ExpressCard™/34 slot* to accommodate ExpressCard™/34 (34 mm wide) media*. You can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices. * Hereinafter, referred to as the ExpressCard/34 slot and the ExpressCard/34 media. The ExpressCard slot can also accommodate other memory cards, including standard-size Memory Stick media, via the memory card adapter.
n 49 N Using Your VAIO Computer Inserting an ExpressCard Media ! Your computer is delivered with a slot protector in the ExpressCard slot. Remove the slot protector before you use the ExpressCard slot for the first time. Use care when inserting or removing the ExpressCard media from the slot. Do not force it in or out of the slot. ✍ You do not need to shut down the computer before inserting or removing an ExpressCard media.
n 50 N Using Your VAIO Computer ! Insert the ExpressCard slot protector to protect against debris entering the slot when not using an ExpressCard media. Before moving the computer, make sure to insert the ExpressCard slot protector into the slot. ✍ If the media or adapter does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction. Make sure you use the most recent software driver provided by the ExpressCard media manufacturer.
n 51 N Using Your VAIO Computer Removing an ExpressCard Media Follow the steps below to remove the ExpressCard media while your computer is on. If it is not removed properly, your system may not work properly. To remove an ExpressCard media ✍ To remove an ExpressCard media when the computer is off, skip steps 1 to 6. 1 Double-click the Safely Remove Hardware icon on the taskbar. The Safely Remove Hardware window appears. 2 Select the hardware you want to unplug. 3 Click Stop.
n 52 N Using Your VAIO Computer Using the Memory Stick Media Your computer supports the Memory Stick media. Memory Stick media is a compact, portable, and versatile device especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and other devices. Because it is removable, it can be used for external data storage.
n 53 N Using Your VAIO Computer Write-protecting a Memory Stick Media Some versions of Memory Stick media are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting. Move the tab horizontally or vertically* to set or release write-protection. When the erasure prevention switch is off, data can be saved on the Memory Stick media. When the erasure prevention switch is on, data can be read from but not saved on the Memory Stick media.
n 54 N Using Your VAIO Computer Inserting a Memory Stick Media There are two ways you can insert a Memory Stick media into your computer. ❑ Using the Memory Stick Duo/PRO Duo media slot The Memory Stick media slot accommodates a small-size Memory Stick media: Memory Stick Duo or Memory Stick PRO Duo media. ❑ Using the ExpressCard/34 slot To insert a standard-size Memory Stick media, use the ExpressCard/34 slot. To do this, you need the supplied memory card adapter.
n 55 N Using Your VAIO Computer ! Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging the computer or the Memory Stick media, do not force the Memory Stick media into the slot if you cannot insert it smoothly. Do not insert more than one Memory Stick media into the slot. Inserting the media improperly may damage the computer.
n 56 N Using Your VAIO Computer Removing a Memory Stick Media To remove a Memory Stick media from the Memory Stick Duo/PRO Duo media slot 1 Check that the Memory Stick Duo/PRO Duo media indicator is off. 2 Push the Memory Stick media in toward the computer. The Memory Stick media ejects. 3 Pull the Memory Stick media out of the slot. ! Always remove the Memory Stick media gently, or it may pop out unexpectedly.
n 57 N Using Your VAIO Computer Using Other Memory Cards Your computer is delivered with the memory card adapter for the ExpressCard/34 slot to support the following memory cards besides the ExpressCard/34 media: ❑ Standard-size Memory Stick and Memory Stick PRO ❑ Secure Digital (SD) ❑ MultiMediaCard (MMC) ❑ xD-Picture Card ! The MagicGate feature of the Memory Stick media and the Memory Stick PRO media is not supported.
n 58 N Using Your VAIO Computer Inserting a Memory Card To insert a memory card to the memory card adapter 1 Insert any one of the memory cards (2) to the memory card adapter (1). ! Make sure to insert a memory card into the memory card adapter in the correct direction to avoid possible damage to the memory card adapter. 2 See Inserting an ExpressCard Media (page 49) to insert the memory card adapter into the ExpressCard/34 slot.
n 59 N Using Your VAIO Computer Removing a Memory Card To remove a memory card from the memory card adapter See Removing an ExpressCard Media (page 51) to remove the memory card adapter from the ExpressCard/34 slot. Then, firmly grasp the extended part of the memory card and carefully pull it out of the memory card adapter.
n 60 N Using Your VAIO Computer Using the Internet Setting Up a Dial-up Internet Connection Before you can connect to the Internet, you need to connect your computer to a telephone line with a telephone cable (may not supplied). Once you have set up your telephone cable connection, you're ready to connect to the Internet. To connect a telephone cable 1 Plug one end of the phone cable (1) into the modem port 2 Plug the other end into the wall jack (2). on the computer.
n 61 N Using Your VAIO Computer Using Wireless LAN (WLAN) Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each other through a powerful network. A WLAN is a network in which a user can connect to a local area network (LAN) through a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.
n 62 N Using Your VAIO Computer Wireless LAN devices using the IEEE 802.11a standard and the ones using the IEEE 802.11b or g standard cannot communicate because the frequencies are different. IEEE 802.11b: The standard speed is 11 Mbps, or about 30 to 100 times faster than a standard dial up. IEEE 802.11a/g: The standard speed is 54 Mbps, or about 5 times faster than a Wireless LAN device using the IEEE 802.11b standard. The 2.
n 63 N Using Your VAIO Computer Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home. ❑ If the Wireless connection is initiated by the VAIO computer, channel 11 will be selected.
n 64 N Using Your VAIO Computer To communicate without an access point (ad-hoc) 1 Turn on the WIRELESS or WIRELESS LAN switch. The WIRELESS LAN indicator lights up. On models that support the Bluetooth functionality*1 and/or the IEEE 802.11a/b/g standard*1, double-click ( / on the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK. 2 Click Start and then Control Panel. 3 Click Network and Internet Connections. 4 Click Network Connections.
n 65 N Using Your VAIO Computer 12 Enter the network key*2. The network key should be 5 or 13 alphanumeric characters or 10 or 26 hexadecimal*3 characters long. You can choose whichever you want. 13 Enter exactly the same network key again, for confirmation. 14 Select the check box This is a computer-to-computer (ad hoc) network; wireless access points are not used at the bottom of the window. 15 Click OK. Your network name appears in the Preferred networks. 16 Click Advanced. The Advanced window appears.
n 66 N Using Your VAIO Computer To disconnect from a computer-to-computer (ad-hoc) network 1 Click Start and then Control Panel. 2 Click Network and Internet Connections. 3 Click Network Connections. The Network Connections window appears. 4 In the right panel under LAN or High-Speed Internet, right-click Wireless Network Connection. 5 Click Properties. The Wireless Network Connection Properties window appears. 6 On the Wireless Networks tab, click Advanced. The Advanced window appears.
n 67 N Using Your VAIO Computer Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point, for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN. The access point coordinates transmission and reception from multiple wireless devices within a specific range.
n 68 N Using Your VAIO Computer To connect to a wireless network 1 Make sure an access point is set up. See the manual that came with your access point for more information. 2 Turn on the WIRELESS or WIRELESS LAN switch. The WIRELESS LAN indicator lights up. ( / On models that support the Bluetooth functionality* and/or the IEEE 802.11a/b/g standard*, double-click the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.
n 69 N Using Your VAIO Computer Using the Bluetooth Functionality The Bluetooth functionality is available on selected models only. See the online Specifications to see whether your model supports the Bluetooth functionality. You can establish wireless communication between your computer and other Bluetooth devices such as another computer or a mobile phone. You can transfer data between these devices without cables and up to 10 meters range in open space.
n 70 N Using Your VAIO Computer Notes on using the Bluetooth functionality ❑ The data transfer rate varies, depending on the following conditions: ❑ Obstacles, such as walls, located between devices ❑ Distance between devices ❑ Material used in walls ❑ Proximity to microwaves and cordless telephones ❑ Radio frequency interference and other environmental conditions ❑ Device configuration ❑ Type of software application ❑ Type of operating system ❑ Use of both Wireless LAN and Bluetooth functionalities at the
n 71 N Using Your VAIO Computer ❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous use of the Bluetooth functionality and wireless communication devices, however, may cause radio interference and result in poorer communication speeds and distances than the standard values.
n 72 N Using Your VAIO Computer Communicating with Another Bluetooth Device You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables.
n 73 N Using Your VAIO Computer To communicate with another Bluetooth device To communicate with another Bluetooth device, you need first to set up the Bluetooth functionality. For setting up and using the Bluetooth functionality, see the help file on the Bluetooth utility software. To see the help file 1 Right-click the Bluetooth icon on the taskbar, and select Help from the menu. Stopping the Bluetooth Connection To stop the Bluetooth connection, turn off the WIRELESS switch.
n 74 N Using Your VAIO Computer Using the Bluetooth Headset The Bluetooth headset is available as an optional accessory. It will come in handy during a video conference over the Internet using instant messaging software, for example Windows Messenger. For details on using the Bluetooth headset, see the manual that came with your Bluetooth headset. To connect the headset with your computer 1 Press and hold the headset power button for at least five seconds to turn on the Bluetooth headset.
n 75 N Using Your VAIO Computer To disconnect the headset from your computer 1 Right-click the Bluetooth icon on the taskbar and select Bluetooth Settings from the menu. The Bluetooth Settings window appears. 2 Select HBH-608, click Next, and select Disconnect from the Bluetooth menu. 3 Click Yes.
n 76 N Using Peripheral Devices Using Peripheral Devices You can add functionality to your computer by using the various ports on the computer. ❑ Connecting a Docking Station (page 77) ❑ Connecting External Speakers (page 86) ❑ Connecting an External Display (page 87) ❑ Selecting Display Modes (page 91) ❑ Using the Multiple Monitors Function (page 92) ❑ Connecting an External Microphone (page 94) ❑ Connecting a Universal Serial Bus (USB) Device (page 95) ❑ Connecting a Printer (page 98) ❑ Connecting an i.
n 77 N Using Peripheral Devices Connecting a Docking Station Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external display. A docking station is not supplied with your computer and is available as an optional accessory. Locating Ports on the Docking Station Back A DC IN indicator Illuminates when the docking station is powered.
n 78 N Using Peripheral Devices Attaching Your Computer to the Docking Station ! When the computer has no battery inserted, do not attach the computer to the docking station. To attach your computer to the docking station ! To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the docking station. 1 Disconnect all peripherals from the computer. 2 Plug the power cord (1) into the AC adapter (2) and an AC outlet.
n 79 N Using Peripheral Devices 4 Slide open the docking station connector cover on the bottom of the computer.
n 80 N Using Peripheral Devices 5 Align the rear bottom corners and the left side of the computer with the guides on the docking station.
n 81 N Using Peripheral Devices 6 Gently push down the computer until it clicks into place. 7 Turn on the computer. ! Use the AC adapter supplied with your computer. Do not move the computer while attached to the docking station; this may detach the docking station and cause damage to the docking station and the computer.
n 82 N Using Peripheral Devices Disconnecting Your Computer from the Docking Station ! To prevent loss of unsaved data, be sure to turn off the computer before disconnecting it from the docking station. Be sure that no devices connected to the docking station are in use before disconnecting the computer. Do not disconnect the computer from the docking station when the IN USE indicator is lit.
n 83 N Using Peripheral Devices To disconnect your computer from the docking station 1 Press the UNDOCK button and wait until the IN USE indicator (2) turns off. ✍ If the IN USE indicator is unlit, you do not have to press the UNDOCK button. Pressing the UNDOCK button while the computer is in a power saving mode returns the computer to Normal mode first, and then initiates the disconnection process.
n 84 N Using Peripheral Devices 2 Lift the computer away from the docking station. 3 Close the docking station connector cover on the bottom of the computer.
n 85 N Using Peripheral Devices Alternatively, you can disconnect the computer from the docking station as follows: 1 Click Start and then Undock Computer. 2 Make sure that a message balloon appears and the IN USE indicator turns off; and then lift the computer away from the docking station. 3 Close the docking station connector cover on the bottom of the computer. ✍ It is extremely important to close the docking station connector cover after disconnecting the computer from the docking station.
n 86 N Using Peripheral Devices Connecting External Speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers 1 Plug the speaker cable (1) into the headphones jack (2) i. 2 Plug the other end of the speaker cable to the external speaker (3). 3 Turn down the volume of the speakers before you turn them on. ✍ Make sure your speakers are designed for computer use.
n 87 N Using Peripheral Devices Connecting an External Display You can connect an external display to your computer. For example, you can use the computer with a computer display or a projector. ❑ Connecting a Computer Display (page 88) ❑ Connecting a Multimedia Computer Display (page 89) ❑ Connecting a Projector (page 90) ✍ Connect the power cord after connecting all other cables. Connected external displays are used as second screens.
n 88 N Using Peripheral Devices Connecting a Computer Display You can connect a computer display (monitor) either directly to your computer or via the optional docking station. To connect a computer display 1 If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet. 2 If you want to connect a VGA monitor, plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the docking station.
n 89 N Using Peripheral Devices Connecting a Multimedia Computer Display You can connect a multimedia computer display that includes built-in speakers and a microphone to your computer or via the optional docking station. To connect a multimedia computer display 1 Plug the power cord of the multimedia computer display (1) into an AC outlet. 2 Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the docking station.
n 90 N Using Peripheral Devices Connecting a Projector You can connect a projector (for example, the Sony LCD projector) directly to your computer or via the optional docking station. To connect a projector 1 Connect the power cord (1) of the projector into an AC outlet. 2 Plug the RGB signal cable (2) into the monitor (VGA) port (3) a on the computer or on the docking station. 3 Plug the audio cable (4) (not supplied) into the headphones jack (5) i.
n 91 N Using Peripheral Devices Selecting Display Modes You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected to your computer. If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors Function (page 92) for more information. To select a display When using the Intel Graphics Media Accelerator (STAMINA mode) 1 Right-click on the desktop to display the context menu.
n 92 N Using Peripheral Devices Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display attached to the monitor (VGA) port, your computer screen and the external display can function as a single desktop. You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window or a toolbar, from one display to the other.
n 93 N Using Peripheral Devices To select the Multiple Monitors mode When using the Intel Graphics Media Accelerator (STAMINA mode) 1 Right-click on the desktop to display the context menu. 2 Click the menu item for graphic properties. 3 Follow the on-screen instructions to change the settings. When using the NVIDIA video controller (SPEED mode) 1 Right-click on the desktop and select NVIDIA Control Panel from the menu. 2 Click the Display icon. 3 Click Change Display Configuration.
n 94 N Using Peripheral Devices Connecting an External Microphone If you need to use a sound input device (for example, to chat on the Internet) you need to plug in an external microphone. To connect an external microphone Plug the microphone cable (1) into the microphone jack (2) m. ✍ Make sure your microphone is designed for computer use.
n 95 N Using Peripheral Devices Connecting a Universal Serial Bus (USB) Device To prevent your computer and/or USB devices from damage, observe the following: ❑ When moving the computer with USB devices connected, avoid any shock or force to the USB ports. ❑ Do not put the computer into a bag or carrying case when it has USB devices connected. Connecting a USB Mouse To connect a USB mouse 1 Choose the USB port (1) 2 Plug the USB mouse cable (2) into the USB port. You can now use your USB mouse (3).
n 96 N Using Peripheral Devices Connecting a USB Floppy Disk Drive You can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive 1 Choose the USB port (1) you prefer to use. 2 Plug the USB floppy disk drive cable (2) into the USB port. Your USB floppy disk drive (3) is now ready for use. ! When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.
n 97 N Using Peripheral Devices Disconnecting a USB floppy disk drive You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. If the computer is off, you can unplug the USB cable directly from the computer. To disconnect a USB floppy disk drive 1 Close all programs accessing the floppy disk drive.
n 98 N Using Peripheral Devices Connecting a Printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a Printer Using the USB Port You can connect a USB printer compatible with your version of Windows to the computer. To connect a printer using the USB port 1 Plug the printer power cord into an AC outlet (1). 2 Choose the USB port (3) 3 Plug one end of a USB printer cable (2) into the USB port and the other end to your printer. you prefer to use.
n 99 N Using Peripheral Devices Connecting an i.LINK Device Notes on connecting i.LINK devices ❑ The computer includes an i.LINK (IEEE 1394) port, which you can use to connect to an i.LINK device such as a digital video camcorder or to connect two VAIO computers in order to copy, delete or edit files. ❑ The i.LINK port on the computer does not supply power to external devices generally powered by i.LINK ports. ❑ The i.
n 100 N Using Peripheral Devices Connecting a Digital Video Camcorder To connect a digital video camcorder 1 Plug one end of the i.LINK cable (1) into the i.LINK port (2) on the computer and the other end into the DV In/Out ports (3) on the digital video camcorder. 2 Launch the DVgate Plus software. ✍ On Sony digital video cameras, ports labeled DV Out, DV In/Out or i.LINK are i.LINK-compatible.
n 101 N Using Peripheral Devices Connecting to a Network (LAN) You can connect your computer to 1000BASE-T*/100BASE-TX/10BASE-T-type networks via an Ethernet network cable. Connect one end of an optional network cable to the network (Ethernet) port on the computer or the optional docking station and the other end to your network. For detailed settings and devices needed to connect to the network, see your network administrator.
n 102 N Using Peripheral Devices ! Telephone lines cannot be connected to the network (LAN) connector on your computer. If the network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage, overheating or fire. - Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone) - Public telephone subscriber line - PBX (private branch exchange) ! Do not plug a telephone cable into the network port.
n 103 N Customizing Your VAIO Computer Customizing Your VAIO Computer This section briefly describes how to change the main settings of your computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities, etc.
n 104 N Customizing Your VAIO Computer Selecting Performance Modes Your computer is equipped with the performance selector switch (1) to select a performance mode for lower power consumption or faster performance. ! Once you have changed the performance mode with the performance selector switch, you must restart your computer to place it into the selected mode. A window appears to prompt you for computer restart. ❑ STAMINA mode Uses the Intel Graphics Media Accelerator to conserve battery power.
n 105 N Customizing Your VAIO Computer Setting the Password You can use one of the BIOS functions to set a power-on password to protect your computer. Once you have set the power-on password, you will have to enter the password after the VAIO logo appears to start your computer. The power-on password will allow you to protect your computer from unauthorized access.
n 106 N Customizing Your VAIO Computer Adding the Power-on Password ! Once you have set the power-on password, you cannot start the computer without entering the password. Make sure not to forget the password. Write down your password and keep it safe and private from other people. If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in for depot service for password reset.
n 107 N Customizing Your VAIO Computer ✍ If you have set the power-on password in conjunction with the fingerprint authentication functionality, you can substitute fingerprint authentication for password entry when turning on the computer. For more information, see Using Fingerprint Authentication (page 111).
n 108 N Customizing Your VAIO Computer Changing/Removing the Power-on Password To change or remove the power-on password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the current password for Enter Password and press the Enter key.
n 109 N Customizing Your VAIO Computer Adding the Windows Password To add the Windows password 1 Click Start and then Control Panel. 2 Click the User Accounts icon. 3 Click your user account under or pick an account to change. 4 Click Create a password. 5 In the Type a new password and Type the new password again to confirm fields, enter the password for your account. 6 Click Create Password. ✍ See Help and Support Center for more information on the Windows password.
n 110 N Customizing Your VAIO Computer Changing/Removing the Windows Password To change the Windows password 1 Click Start and then Control Panel. 2 Click the User Accounts icon. 3 Click your user account under or pick an account to change. 4 Click Change my password. 5 Enter the current password under Type your current password. 6 Enter a new password under Type a new password and the same password under Type the new password again to confirm. 7 Click Change Password.
n 111 N Customizing Your VAIO Computer Using Fingerprint Authentication Your computer may be equipped with a fingerprint sensor to provide you with additional convenience. A small horizontal bar located between the left and right touch-pad buttons is the sensor of the fingerprint reader and will be referred to as the fingerprint sensor hereinafter. See the online Specifications to see whether your model is equipped with the fingerprint sensor.
n 112 N Customizing Your VAIO Computer Precautions on Using Fingerprint Authentication ❑ The fingerprint authentication technology does not assure 100% verification. Sony Corporation assumes no liabilities for any problems and damages arising out of your use of or inability to use the fingerprint sensor. ❑ The fingerprint authentication technology does not assure complete protection of your data and hardware.
n 113 N Customizing Your VAIO Computer ❑ When swiping your finger across the fingerprint sensor, keep the following in mind: ❑ Place your fingertip flat in the center of the fingerprint sensor. ❑ Scan your fingerprint from the top joint of the finger to the fingertip. ❑ Swipe your finger perpendicularly across the fingerprint sensor. ❑ Keep your finger in contact with the fingerprint sensor while swiping. ❑ Let the fingerprint sensor take about one second to scan your fingerprint.
n 114 N Customizing Your VAIO Computer Enrolling a Fingerprint To use the fingerprint authentication functionality, you must enroll your fingerprint(s) in your computer. ✍ Set the Windows password on your computer before enrollment. See Adding the Windows Password (page 109) for detailed instructions. To enroll a fingerprint ! Up to 21 fingerprints can be enrolled on a first-come, first-served basis for logging on to your system using the Boot Security functionality.
n 115 N Customizing Your VAIO Computer 7 Swipe your finger across the fingerprint sensor four times to perform a swipe test, and then click Next. The Enrollment window appears. ✍ See To scan a fingerprint (page 116) for the scan procedure. 8 Click on the finger of which fingerprint you want to enroll. 9 Swipe the finger across the fingerprint sensor three times. 10 Click Finish. ✍ To enroll more fingerprints, repeat steps 7 and 8 above.
n 116 N Customizing Your VAIO Computer To scan a fingerprint 1 Place the top joint of your finger on the fingerprint sensor (1). ✍ Place your fingertip flat in the center of the fingerprint sensor. 2 Swipe your finger perpendicularly across the fingerprint sensor. ! Keep your finger in contact with the fingerprint sensor while swiping. Fingerprint enrollment may fail if you move your finger too fast or too slow. Take about one second to swipe your finger across the sensor.
n 117 N Customizing Your VAIO Computer Logging Onto Your System To use the fingerprint authentication functionality in place of password entry to log onto your system, you need to set the power-on, hard disk, and Windows passwords and configure your computer for fingerprint authentication. For setting the power-on password, see Setting the Password (page 105).
n 118 N Customizing Your VAIO Computer ✍ With the Automatically log onto system after power-on authentication check box selected, you can start your system and launch Windows by swiping your finger only once. If only the Enable boot security check box has been selected, you will be prompted to swipe your finger or enter the password before Windows is launched. To log onto the system using the Boot Security functionality 1 Turn on the computer. The authentication window appears following the VAIO logo.
n 119 N Customizing Your VAIO Computer Using the Password Bank Once you have registered your user information (user accounts, passwords, etc.) for web sites in the password bank, you can substitute fingerprint authentication for entering required information and access the password-protected web sites.
n 120 N Customizing Your VAIO Computer Using a Password Bank Entry to Access a Web Site Once you have added an entry to the password bank, you can use it to access the respective password-protected web site. To access a password-protected web site 1 Visit the desired password-protected web site to display the user account and password entry window. A message balloon appears to indicate that you have a password bank entry for the site.
n 121 N Customizing Your VAIO Computer Importing/Exporting Password Bank Entries You can export/import entries to/from the password bank for a backup or recovery purpose. To export an entry 1 Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu. 2 Select Settings. The Protector Suite QL window appears. 3 Click the Registrations tab. 4 Select the desired entry name from the list and click Export. 5 Enter a file name and click Save.
n 122 N Customizing Your VAIO Computer Using the My Safe Folder The encrypted My Safe folder is provided to protect your data against unauthorized access. With the fingerprint authentication functionality, you can decrypt (unlock) this folder to access your data. Note that you need to initialize and create the folder before you use the My Safe folder for the first time.
n 123 N Customizing Your VAIO Computer To initialize the My Safe folder 1 Double-click the My Safe icon on the desktop. 2 Swipe the finger with the enrolled fingerprint across the fingerprint sensor. 3 Click Next. 4 Enter a backup password twice and click Next. The password should be at least 8 alphanumeric characters long. ! You will need the backup password if the fingerprint sensor fails. Without the backup password, you will not be able to restore your data in the My Safe folder.
n 124 N Customizing Your VAIO Computer To resize the My Safe folder ✍ The maximum size of the My Safe folder is 2 GB. 1 Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu. 2 Select Settings. The Protector Suite QL window appears. 3 Click the My Safe tab. 4 Click Change Size. The window for changing the folder size appears.
n 125 N Customizing Your VAIO Computer Using the Application Launcher The application launcher feature is available on your computer for launching your preferred application (executable file) that is assigned to one of your fingers with the enrolled fingerprint. Once you have assigned an application to your finger, you can then swipe the finger across the fingerprint sensor to launch the assigned application and eliminate tiresome menu selections.
n 126 N Customizing Your VAIO Computer Assigning an Application to Your Finger To use the application launcher feature, you must assign an application to your individual fingers in advance. To assign an application to your finger 1 Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu. 2 Select Settings. The Protector Suite QL window appears. 3 Click the Applications tab. 4 Click Add. The Applications window appears.
n 127 N Customizing Your VAIO Computer Changing an Application Assignment to Your Finger To change an application assignment to your finger 1 Swipe the finger with the enrolled fingerprint across the fingerprint sensor to display the Protector Suite QL menu. 2 Select Settings. The Protector Suite QL window appears. 3 Click the Applications tab. 4 Select the desired finger and click Edit. The Applications window appears. 5 Change its assignment and click OK.
n 128 N Customizing Your VAIO Computer Using Trusted Platform Module (TPM) The embedded Trusted Platform Module (TPM) on selected models provides your computer with basic security functions. In combination with the TPM, you can encrypt and decrypt your data to strengthen computer security against inappropriate access. TPMs are defined by Trusted Computing Group (TCG) and also called security chips. See the online Specifications to see whether your model is equipped with the TPM.
n 129 N Customizing Your VAIO Computer Precautions on Using the TPM ❑ Although your computer is provided with the latest TPM security functions, these functions do not assure complete protection of your data and hardware. Sony Corporation assumes no liabilities for any problems and damages arising out of your use of the functions. ❑ After you have installed the Infineon TPM Professional Package, you need to set a few TPM passwords on your computer.
n 130 N Customizing Your VAIO Computer Important Notice ❑ Do not encrypt the Documents and Settings folder. Encrypting the files in the folders containing basic user keys and others, which are listed later in this section, using the Encrypting File System (EFS) will disable you to launch your TPM software successfully and decrypt the encrypted data if: ❑ The TPM software has been installed. ❑ The platform has been initialized. ❑ The EFS functionality has been enabled in user initialization process.
n 131 N Customizing Your VAIO Computer ❑ Do not encrypt the following folders and files. There will be no way to restore the following folders and files or the archive, backup, token, password reset token and secret files of your TPM software if you carelessly encrypt them. Sony Corporation assumes no liability for any troubles and damages arising out of your careless encryption of such folders and files. ❑ Automatic backup file Default file name: SPSystemBackup.
n 132 N Customizing Your VAIO Computer Configuring the TPM To use the embedded TPM, you need to: 1 Enable the TPM on the BIOS setup screen. 2 Install the Infineon TPM Professional Package. 3 Initialize and configure the TPM. Enabling the TPM on the BIOS setup screen To enable the TPM 1 Turn on your computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
n 133 N Customizing Your VAIO Computer Installing the Infineon TPM Professional Package Read the Readme.txt in the C:\infineon\Readme folder. Then, double-click C:\Infineon\setup.exe to install the package. To install this package, you must have administrator rights on the computer. Initializing and configuring the TPM See the online documentation for detailed information.
n 134 N Customizing Your VAIO Computer Setting Up Your Computer with VAIO Control Center The VAIO Control Center utility allows you to consult system information and specify preferences for system behavior. To use VAIO Control Center 1 Click Start, point to All Programs, and click VAIO Control Center. The VAIO Control Center window appears. 2 Select the desired control item and change the settings. 3 Once finished, click OK. The setting of the desired item has been changed.
n 135 N Customizing Your VAIO Computer Using the Power Saving Modes When you use a battery as the power source for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
n 136 N Customizing Your VAIO Computer Using Standby Mode Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber power light flashes in this mode. To activate Standby mode 1 Click Start and then Turn Off Computer. 2 Click Stand By. To return to Normal mode Press any key. ! If you press the power button for more than four seconds, the computer will turn off automatically. You will lose any unsaved data.
n 137 N Customizing Your VAIO Computer To change the Standby mode settings 1 Click Start and then Control Panel. 2 Click Performance and Maintenance. 3 Click Power Options. The Power Options Properties window appears. 4 Select the Power Schemes tab. 5 Change the System Standby settings.
n 138 N Customizing Your VAIO Computer Using Hibernate Mode In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. Even when the battery runs down, no data will be lost. The power indicator light is off in this mode. To activate Hibernate mode Press the Fn+F12 keys. The Hibernating screen appears and the computer enters Hibernate mode. Alternatively, 1 Click Start and then Turn Off Computer. 2 Click Hibernate.
n 139 N Customizing Your VAIO Computer ✍ If you do not use the computer for a long period of time, put the computer into Hibernate mode. This power saving mode saves you the time of shutting down or resuming. When the computer is in Hibernate mode, you cannot insert a disc. Hibernate mode requires more time than Standby mode to be activated. It takes more time to return to Normal mode from Hibernate mode than from Standby mode. Hibernate mode uses less power than Standby mode.
n 140 N Customizing Your VAIO Computer Managing Power with VAIO Power Management Power management helps you set up power schemes for running on AC power or batteries to suit your requirements for power consumption. VAIO Power Management is a software application developed exclusively for VAIO computers. With this software application, you can enhance the Windows power management functions to ensure better operations of your computer and longer battery life.
n 141 N Customizing Your VAIO Computer Activating VAIO Power Management Power Schemes VAIO Power Management provides several predefined power schemes. Each power scheme consists of a group of power management settings that are designed to meet specific power management goals, ranging from maximum power management to no power management. To activate a VAIO Power Management power scheme 1 Click Start and then Control Panel. 2 Click Performance and Maintenance. 3 Click Power Options.
n 142 N Customizing Your VAIO Computer VAIO Power Management Viewer To start VAIO Power Management Viewer Click on the VAIO Power Management tab. Alternatively, you can click Start, point to All Programs and VAIO Control Center, and then click VAIO Power Management Viewer to start the viewer. To change the power scheme Select the desired power scheme from the drop-down list on VAIO Power Management Viewer.
n 143 N Customizing Your VAIO Computer Setting Up Your Language with Windows XP Professional The language mode selection is available on models with Windows XP Professional, but not with Windows XP Home Edition. Please see the online Specifications to see which Windows edition is installed on your model. Windows XP Professional computers include the Multilingual User Interface (MUI) feature.
n 144 N Customizing Your VAIO Computer To change the country and language settings 1 Click Start and then Control Panel. 2 In the Control Panel window, double-click the Regional and Language Options icon. If you do not see this icon, click Switch to Classic View on the left side. 3 In the Regional Options tab of the Regional and Language Options window, select your language from the Standards and formats drop-down menu.
n 145 N Customizing Your VAIO Computer To change the keyboard layout 1 Click Start and then Control Panel. 2 In the Control Panel window, double-click the Regional and Language Options icon. If you do not see this icon, click Switch to Classic View on the left side. 3 In the Languages tab of the Regional and Language Options window, click the Details button. The Text Services and Input Languages window appears.
n 146 N Customizing Your VAIO Computer Configuring Your Modem Before you can start using your internal modem (not all modem are built-in), or each time you use your modem while traveling, make sure that the country of the active location defined in the Phone and Modem Options dialog box matches the country you are dialing from. To change your modem country settings 1 Click Start and then Control Panel. 2 Click Printers and Other Hardware. 3 Double-click Phone and Modem Options.
n 147 N Customizing Your VAIO Computer 9 Click Apply/OK. Your modem is configured. ✍ Before applying new country settings, please make sure your phone cable is disconnected from your computer.
n 148 N Customizing Your VAIO Computer Protecting the Hard Disk Your computer has the VAIO HDD Protection utility preinstalled for customizing your settings for protecting your hard disk drive against shock hazards. You can select the sensitivity level of the built-in shock sensor to set the appropriate protection level. Activating VAIO HDD Protection To protect your hard disk drive against shock hazards, you must first activate VAIO HDD Protection.
n 149 N Upgrading Your VAIO Computer Upgrading Your VAIO Computer Your computer and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee due to mishandling, we recommend that: ❑ You contact your dealer to install a new memory module. ❑ You do not install it yourself, if you are not familiar with upgrading memory on a computer. ❑ You do not touch the connectors or open the memory panel.
n 150 N Upgrading Your VAIO Computer Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages. The number of available slots depends on the configuration of your model. Notes on adding/removing memory modules ❑ Be careful when changing memory. Improper installation of memory modules may cause damage to your system.
n 151 N Upgrading Your VAIO Computer ❑ Use the special bag delivered with the memory module or wrap the module in aluminum foil to protect it from electrostatic discharge. ❑ Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of the computer, will result in damage to the computer and any repair costs will not be covered by the warranty.
n 152 N Upgrading Your VAIO Computer Removing and Installing a Memory Module To change or add a memory module 1 Shut down the computer and disconnect all peripheral devices. 2 Unplug the computer and remove the battery pack. 3 Wait until the computer cools down. 4 Unscrew the screws (indicated by the arrows below) on the bottom of the computer and remove the memory module compartment cover.
n 153 N Upgrading Your VAIO Computer 6 Grasp the insulation sheet (1) tab and flip open the sheet. ! The insulation sheet is equipped for module protection. Do not pull it too hard to damage the sheet.
n 154 N Upgrading Your VAIO Computer 7 Remove the memory module: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). 8 Remove the new memory module from its packaging.
n 155 N Upgrading Your VAIO Computer 9 Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any other components on the motherboard. Do not damage the inner film cover equipped for module protection. 10 Replace the memory module compartment cover. 11 Tighten the screws on the bottom of the computer. 12 Reinstall the battery and turn on the computer.
n 156 N Upgrading Your VAIO Computer Viewing the Amount of Memory To view the amount of memory 1 Turn on the computer. 2 Click Start, point to All Programs, and click VAIO Control Center. 3 Double-click the System Information folder in the VAIO Control Center window. 4 Double-click the System Information icon in the System Information folder. You can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and restart the computer.
n 157 N Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage.
n 158 N Precautions On Handling the LCD Screen ❑ Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be careful when using the computer near a window. ❑ Do not scratch the LCD screen or exert pressure on it. This could cause a malfunction. ❑ Using the computer in low temperature conditions may produce a residual image on the LCD screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal.
n 159 N Precautions On Using the Power Source ❑ See the online Specifications to check the power operation of your model. ❑ Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder. ❑ You can purchase a power strip with a surge protector. This device prevents damage to the computer caused by sudden power surges, in an electrical storm, for example. ❑ Do not place heavy objects on the power cord. ❑ To disconnect the cord, pull it out by the plug.
n 160 N Precautions On Handling Your Computer ❑ Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of the computer. ❑ If you drop a solid object or any liquid onto the computer, shut down the computer and then unplug it. You may want to have the computer checked by qualified personnel before operating it again.
n 161 N Precautions ❑ Do not use cut or damaged connection cables. ❑ If the computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In this case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact VAIO-Link. ❑ Make sure you disconnect the power cord before cleaning the computer. ❑ To avoid losing data if the computer is damaged, back up your data regularly.
n 162 N Precautions On Using the Built-in MOTION EYE Camera ❑ Do not touch the front mirror plate over the lens of the built-in MOTION EYE camera, as it may make scratches on the plate and such scratches will appear on the captured images. ❑ Do not let the direct sunlight get into the scope of the built-in MOTION EYE camera regardless of the computer's power state, as it may cause a malfunction of the camera. ❑ The built-in MOTION EYE camera is disabled while videos or still images are imported from an i.
n 163 N Precautions On Handling Discs ❑ Do not touch the surface of the disc. ❑ Do not drop or bend the disc. ❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: ❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc.
n 164 N Precautions On Using the Battery Pack ❑ Do not leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. ❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures. ❑ Charge the batteries at temperatures between 10°C to 30°C. Lower temperatures require a longer charging time. ❑ Certain rechargeable batteries do not meet Sony quality and safety standards.
n 165 N Precautions On Using Headphones ❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings. ❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play.
n 166 N Precautions On Handling the Hard Disk The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock or dust. Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling the computer. To avoid damaging your hard disk ❑ Do not subject the computer to sudden movements. ❑ Keep the computer away from magnets.
n 167 N Precautions On Handling the Memory Card Adapter ❑ Do not touch the memory card adapter connector with your finger or metallic objects. ❑ Use only the adhesive label exclusively designed for the memory card adapter as a label. ❑ Do not bend, drop, or apply strong shock to the memory card adapter. ❑ Do not disassemble or modify the memory card adapter. ❑ Do not let the memory card adapter get wet.
n 168 N Troubleshooting Troubleshooting This section describes how to solve common problems you might encounter when using your computer. Many problems have simple solutions. Try these suggestions before contacting VAIO-Link.
n 169 N Troubleshooting ❑ Memory Stick Media (page 210) ❑ Peripherals (page 211) ❑ Docking Station (page 212)
n 170 N Troubleshooting Computer What should I do if my computer does not start? ❑ Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on. ❑ Make sure the battery is installed properly and charged. ❑ Make sure the floppy disk drive (if applicable) is empty. ❑ If your computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS is plugged into a power source and turned on.
n 171 N Troubleshooting What should I do if a BIOS error appears when I turn on my computer? If the message "Press to resume, to setup" appears at the bottom of your computer screen, follow these steps: 1 Press the F2 key. The BIOS setup screen appears. 2 Set the date (month/day/year). Press the Enter key. 3 Press the m key to select System Time, and then set the time (hour: minute: second). Press the Enter key. 4 Press the , key to select the Exit tab, and then press the F9 key.
n 172 N Troubleshooting What should I do if my computer or software stops responding? ❑ It is best to turn off your computer using the Turn Off Computer option on the Microsoft Windows Start menu, located on the taskbar. Using other methods, including those listed below, may result in loss of unsaved data. ❑ Click Start, point to Turn Off Computer, and then click Turn Off. ❑ If your computer does not turn off, press the Ctrl+Alt+Delete keys simultaneously.
n 173 N Troubleshooting Why doesn't my computer enter Standby or Hibernate mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Standby or Hibernate. To restore your computer to normal operating stability 1 Close all open programs. 2 Click Start, Turn Off Computer, and then Restart. 3 If your computer does not restart, press the Ctrl+Alt+Delete keys simultaneously.
n 174 N Troubleshooting What should I do if a message window, notifying of incompatibility or improper installation of the battery pack, appears and my computer enters Hibernate mode? ❑ This symptom could be due to the battery pack not being installed properly. To resolve this symptom, turn off your computer and remove the battery pack. Then install the battery pack to the computer again. For details, see Installing the Battery Pack (page 24).
n 175 N Troubleshooting Why does the System Properties window display a slower CPU speed than the maximum? This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation purposes, System Properties may display the CPU's current speed instead of the maximum speed.
n 176 N Troubleshooting Why does it take time before my computer starts? ❑ If Norton Internet Security's Personal Firewall is active, it may take some time before the desktop screen appears due to network security checkups. ❑ If the TPM is enabled, it will take longer before the VAIO logo appears due to security checks at computer startup.
n 177 N Troubleshooting What should I do if I cannot boot my computer from the USB floppy disk drive connected to the computer? To boot your computer from the USB floppy disk drive, you need to change the boot device. Turn on your computer and press the F11 key when the VAIO logo appears. How can I change the volume of the startup sound? To change the startup sound volume 1 Press the F2 key. The BIOS setup screen appears. 2 Press the < or , key to select Advanced.
n 178 N Troubleshooting System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to the computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly.
n 179 N Troubleshooting How do I keep my antivirus software updated? You can keep the Norton Internet Security software program current with the latest updates from Symantec Corporation. To download and install the latest security update 1 2 Double-click the Norton Internet Security icon on the taskbar. If you have not previously registered the antivirus software, a series of information wizards appears. 1 Follow the on-screen instructions to complete each wizard.
n 180 N Troubleshooting Battery How do I find the battery charging status? See Charging the Battery Pack (page 26). When is my computer using AC power? When your computer is directly connected to the AC adapter, it uses AC power, even if a battery is installed. When should I recharge the battery? ❑ When the battery level falls below 10 percent. ❑ When both the battery and power indicators blink. ❑ When you have not used the battery for a long time.
n 181 N Troubleshooting Can my computer enter Hibernate mode while using battery power? Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 138) for information on how you can manually activate Hibernate mode.
n 182 N Troubleshooting Built-in MOTION EYE Camera Why does the viewer window show no images or poor-quality images? ❑ The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the application before using the built-in MOTION EYE camera. ❑ The video memory of your computer may have become insufficient for displaying images from the built-in MOTION EYE camera.
n 183 N Troubleshooting Why does movie playback show dropped frames when my computer is running on the battery? The battery is running out of power. Connect your computer to an AC power source. Why do the images captured by the built-in MOTION EYE camera flicker? This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output frequency and shutter speed. To reduce flicker noise, change the pointing direction of the camera or the screen brightness.
n 184 N Troubleshooting Why can't I use the built-in MOTION EYE camera? ❑ The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the application before using the built-in MOTION EYE camera. ❑ If the problem persists, you must reinstall the driver software for the camera. Follow these steps: 1 Click Start and then Control Panel. 2 Click the Performance and Maintenance icon. 3 Click the System icon.
n 185 N Troubleshooting Internet What should I do if my modem does not work? ❑ Make sure the telephone cable is securely plugged into the modem port on your computer and the wall jack. ❑ Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone. ❑ Make sure the telephone number the program is dialing is correct. ❑ Make sure the software you are using is compatible with your computer's modem. (All preinstalled Sony programs are compatible.
n 186 N Troubleshooting Why is my modem connection slow? Your computer is equipped with a V.92/ V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems.
n 187 N Troubleshooting Networking What should I do if my computer cannot connect to a wireless LAN access point? ❑ Connection availability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ❑ Make sure the WIRELESS or WIRELESS LAN switch is on and the WIRELESS LAN indicator is lit on your computer. ❑ Make sure power to the access point is on.
n 188 N Troubleshooting Why is the data transfer speed slow? ❑ The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed, move your computer away from obstructions or closer to any access point you may be using.
n 189 N Troubleshooting What are channels? ❑ Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. ❑ If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point.
n 190 N Troubleshooting Bluetooth Technology What should I do if other Bluetooth devices cannot discover my computer? ❑ Make sure both devices have the Bluetooth feature enabled. ❑ If the Bluetooth indicator is off, turn on the WIRELESS switch. ❑ You cannot use the Bluetooth functionality when your computer is in a power saving mode. Return to normal mode, then turn on the WIRELESS switch. ❑ Your computer and the device may be too far apart.
n 191 N Troubleshooting What should I do if other Bluetooth devices cannot connect to my computer? ❑ Make sure the other device is authenticated. ❑ Your computer may not allow connections from other devices. To enable Bluetooth device connections, follow these steps: 1 Right-click the Bluetooth icon on the taskbar. 2 Select Options from the menu. The Options window appears. 3 Check if Standard or Low is selected for the Bluetooth security level on the Security tab.
n 192 N Troubleshooting Why is my Bluetooth connection slow? ❑ The data transfer speed depends on the obstacles and/or the distance between the two devices, on the radio wave quality, and on the operating system or the software in use. Try to move your computer or try to place the two devices closer. ❑ The 2.4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by other devices.
n 193 N Troubleshooting Can I use a device with Bluetooth technology on airplanes? With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and airplanes, may have restrictions on the use of Bluetooth devices, due to radio interference. Check with facility staff to see if use of the Bluetooth feature on the computer is permitted.
n 194 N Troubleshooting CDs and DVDs Why does my computer freeze when I try to read a disc? The disc that your computer is trying to read may be dirty or damaged. Follow these steps: 1 Restart the computer by clicking Start, Turn Off Computer, and Restart. 2 Eject the disc from the optical disc drive. 3 Examine the disc for dirt or damage. If the disc is dirty, see On Handling Discs (page 163) for instructions on how to clean it.
n 195 N Troubleshooting What should I do if I cannot play a CD or DVD properly on my computer? ❑ Make sure the disc was inserted into the optical disc drive with the label facing up. ❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions. ❑ If the CD or DVD is dirty or damaged, your computer will stop responding.
n 196 N Troubleshooting 5 Double-click the optical disc drive device to open the submenu. 6 Double-click the listed drive, and select the Properties tab. 7 Click to select the Enable digital CD audio for this CD-ROM device check box, if it is not selected. You can confirm the driver software by selecting the Driver tab, and clicking Driver Details. 8 Click OK to close the window. ❑ Make sure an adhesive label is not affixed to the CD or DVD.
n 197 N Troubleshooting What should I do if I cannot write data to CD media? ❑ Do not launch any software application or allow any to launch automatically, not even a screen saver. ❑ Do not use the keyboard. ❑ Do not use a CD-R/RW disc that has an adhesive label affixed to it. This could cause a write error or other damage. What should I do if I cannot write data to DVD media? ❑ Make sure you are using the correct DVD recordable media.
n 198 N Troubleshooting What should I do if I cannot write data to DVD-RAM media using Windows functions? This Q & A entry applies to selected models only. See the online Specifications to see whether your model is equipped with the DVD±RW/RAM drive. Follow these steps to change the settings: 1 Click Start and then My Computer. 2 Right-click the optical disc drive icon and select Properties. 3 Click the Recording tab. 4 Click to cancel the Enable CD recording on this drive check box. 5 Click OK.
n 199 N Troubleshooting Display Why did my computer screen go blank? ❑ Your computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or Hibernate). If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen. See Using the Power Saving Modes (page 135) for more information. ❑ Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on.
n 200 N Troubleshooting What should I do if the LCD brightness of my computer screen changes? The LCD brightness setting, adjusted with the Fn+F5/F6 keys, is temporary and this adjustment is overridden by the setting on the VAIO Power Management tab when another power scheme is selected. To save this preference for the brightness ✍ To do the following procedure, you must have administrator rights on your computer. 1 Click Start and then Control Panel. 2 Click Performance and Maintenance.
n 201 N Troubleshooting Printing What should I do if I cannot print a document? ❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and computer. ❑ Make sure your printer is compatible with the Windows operating system installed on your computer. ❑ You may need to install the printer driver software before you use your printer. See the manual that came with your printer for more information.
n 202 N Troubleshooting Microphone What should I do if my microphone does not work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone jack on your computer.
n 203 N Troubleshooting Mouse What should I do if my computer does not recognize my mouse? ❑ Make sure your mouse is securely plugged into the port. ❑ Restart your computer with your mouse connected. What should I do if the pointer does not move when I use my mouse? ❑ Make sure another mouse is not installed. ❑ If you are playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart your computer.
n 204 N Troubleshooting Speakers What should I do if my speakers do not work? ❑ Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound. ❑ Make sure your speakers are designed for computer use. ❑ If your speakers have a muting button, set the button to off. ❑ If you have connected an audio cable to the headphones jack, disconnect the cable and use the speaker cable supplied with your speakers.
n 205 N Troubleshooting Touch Pad What should I do if the touch pad does not work? ❑ Try restarting your computer. Press the Ctrl+Alt+Delete keys simultaneously. In the Windows Task Manager window, select Restart from the Shut Down menu to restart the computer. ❑ If the pointer does not move while playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart your computer. ❑ If the problem persists, make sure a mouse is not installed.
n 206 N Troubleshooting Keyboard What should I do if the keyboard configuration is wrong? ❑ The language layout of your computer's keyboard is specified on the sticker on the box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. ❑ To change the keyboard configuration, follow these steps: 1 Click Start and then Control Panel 2 Click Date, Time, Language and Regional Options, and click Regional and Language Options.
n 207 N Troubleshooting Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: 1 Close all programs that are accessing the floppy disk drive.
n 208 N Troubleshooting PC Cards What should I do if my PC Card does not work? ❑ Make sure the PC Card is inserted properly. See Inserting a PC Card (page 45) for more information. ❑ Make sure the PC Card is compatible with the Microsoft Windows operating system installed on your computer. ❑ See the manual that came with your PC Card for more information. You may need to install driver software if you are not using a Sony PC Card.
n 209 N Troubleshooting Audio/Video What should I do if I cannot use my DV camcorder? If the message that DV equipment seems to be disconnected or turned off appears, the i.LINK cable may not be securely plugged into the ports on your computer or camcorder. Unplug the connectors, and plug them in again. See Connecting an i.LINK Device (page 99) for more information. ✍ i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.
n 210 N Troubleshooting Memory Stick Media What should I do if I cannot open my image files? You may need to reformat your Memory Stick media. Formatting Memory Stick media erases all data, including music data previously saved to it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep. 1 Copy the data from the Memory Stick media onto your computer's hard disk to save data or images.
n 211 N Troubleshooting Peripherals What should I do if I cannot connect a USB device? ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check the battery is charged. If you are using a printer, check the power cable is connected properly to the AC outlet. ❑ Try using a different USB port on your computer. The driver could be installed to the specific port you used the first time you connected the device.
n 212 N Troubleshooting Docking Station Why can't I use my TFT/DVI monitor connected to the DVI-D port? The DVI-D port on the docking station is disabled when your computer is in STAMINA mode. Change the performance mode to SPEED mode and restart the computer. See Selecting Performance Modes (page 104) for mode selection.
n 213 N Support Options Support Options The section contains information on where to go for answers to questions about your computer. Sony Support Information See the following sources for answers in the sequence listed below. See Documentation (page 8) for details on the printed and non-printed documentation supplied with your computer, as well as further sources of reference. ❑ Go to the help files that accompany your software for instructions on using the software.
n 214 N Support Options e-Support What is e-Support? You have searched our user guides and web site (www.vaio-link.com) but have not found an answer to your question/issue? e-Support is the ideal solution for you! Our e-Support Web Portal is an interactive web site on which you can submit any technical query you may have regarding your computer and receive answers from our dedicated support team.
n 215 N Support Options Can I submit my questions at any time? Yes, you can submit your questions 24/7, but please keep in mind that our e-Support Team can only treat your queries from Monday till Friday between 8am and 6pm.
n 216 N Support Options Trademarks Sony, Battery Checker, Click to DVD, DVgate Plus, HotKey Utility, Memory Stick Formatter, Prepare your VAIO, SonicStage, SonicStage Mastering Studio, VAIO Control Center, VAIO Edit Components, VAIO Media, VAIO Power Management, Image Converter, My Club VAIO, VAIO Update, Memory Stick, the Memory Stick logo, VAIO and the VAIO logo are trademarks of Sony Corporation. Intel, Pentium, and Intel SpeedStep are trademarks or registered trademarks of Intel Corporation.
n 217 N Support Options The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. SD is a registered trademark of Toshiba Corporation. MultiMediaCard™ is a trademark of MultiMediaCard Association. xD-Picture Card™ is a trademark of Fuji Photo Film Co., Ltd. All other names of systems, products and services are trademarks of their respective owners.
n © 2006 Sony Corporation
