N User Guide Personal Computer VGN-SR series
n 2 N Contents Before Use.......................................................................... 4 Finding More about Your VAIO Computer .................... 5 Ergonomic Considerations ............................................ 7 Using the Bluetooth Function ......................................65 Using Fingerprint Authentication .................................71 Using the TPM .............................................................78 Getting Started..........................................
n 3 N Precautions..................................................................... 134 Safety Information ..................................................... 135 Care and Maintenance Information........................... 138 Handling Your Computer........................................... 139 Handling the LCD Screen ......................................... 141 Using the Power Source ........................................... 142 Handling the Built-in Camera ....................................
Before Use > n 4 N Before Use Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide a state-of-the-art personal computing experience. ! External views illustrated in this manual may look slightly different from those of your computer. How to find specifications Some features, options, and supplied items may not be available on your computer.
Before Use > Finding More about Your VAIO Computer n 5 N Finding More about Your VAIO Computer This section provides support information about your VAIO computer. 1. Printed Documentation ❑ Quick Start Guide — An overview of components connection, set-up information, etc. ❑ Recovery and Troubleshooting Guide ❑ Regulations, Guarantee, and Service Support 2. On-screen Documentation ❑ User Guide (This manual) — Features of your computer and information about solving common problems.
Before Use > Finding More about Your VAIO Computer n 6 N 3. Support Web Sites If you have any problem with the computer, you can visit the VAIO-Link web site at http://www.vaio-link.com for troubleshooting. Before contacting VAIO-Link by telephone, try to solve the problem by reading the supplied documentation and visiting other Sony web sites. ❑ For more about VAIO and becoming part of the growing VAIO community, visit the web site at http://www.club-vaio.com.
Before Use > Ergonomic Considerations n 7 N Ergonomic Considerations You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations for both stationary and portable environments: ❑ Position of your computer – Place the computer directly in front of you. Keep your forearms horizontal, with your wrists in a neutral, comfortable position while using the keyboard or the pointing device.
Before Use > Ergonomic Considerations n 8 N ❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display as well. ❑ Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect lighting to avoid bright spots on the display.
Getting Started > n 9 N Getting Started This section describes how to get started using your VAIO computer.
Getting Started > Locating Controls and Ports n 10 N Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages. ! The appearance of your computer may be different from those illustrated in this manual due to variations in specifications. It may also vary in some countries or areas.
Getting Started > Locating Controls and Ports n 11 N A B C D E F G H I J K Num lock indicator (page 17) Caps lock indicator (page 17) Scroll lock indicator (page 17) Charge indicator (page 17) Disc drive indicator (page 17) Touch pad (page 33) Left button (page 33) Right button (page 33) MODE button (page 34) Switch buttons (page 34) SETTING button (page 34)
Getting Started > Locating Controls and Ports n 12 N Back A Battery connector (page 20)
Getting Started > Locating Controls and Ports n 13 N Right A B C D Optical disc drive indicator (page 17) Manual eject hole (page 177) Drive eject button (page 36) Optical disc drive (page 36) E Hi-Speed USB (USB 2.0) ports* (page 105) F Power button/Power indicator (page 17) * Support high-/full-/low- speeds.
Getting Started > Locating Controls and Ports n 14 N A Port cover Open the port cover to access the ports behind it. Pull the port cover down with your fingertip and gently pull it until it is completely out of the socket.
Getting Started > Locating Controls and Ports n 15 N Left A B C D DC IN port (page 18) Microphone jack (page 104) Headphones jack (page 94) Air vent E Monitor port*1 (page 95) F HDMI output port*2 (page 99) G i.LINK 4-pin (S400) port (page 107) H ExpressCard/34 slot (page 49) I Security slot *1 Not accessible when your computer is attached to the docking station. *2 On selected models only.
Getting Started > Locating Controls and Ports n 16 N Bottom A Air vents B Docking station connector (page 88) C Memory module compartment cover (page 127)
Getting Started > About the Indicator Lights n 17 N About the Indicator Lights Your computer is equipped with the following indicator lights: Indicator Functions Power 1 Illuminates in green while the computer is on, blinks slowly in orange while the computer is in Sleep mode, and goes out when the computer is turned off or enters Hibernate mode. Charge Illuminates while the battery pack is charging. See Charging the Battery Pack (page 23) for more information.
Getting Started > Connecting a Power Source n 18 N Connecting a Power Source You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer. Using the AC Adapter While your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet. ✍ Use only the supplied AC adapter for your computer. To use the AC adapter 1 Plug one end of the power cord (1) into the AC adapter (3).
Getting Started > Connecting a Power Source n 19 N ✍ To disconnect your computer completely from AC power, unplug the AC adapter. Make sure that the AC outlet is easily accessible. If you do not intend to use your computer for an extended period of time, place the computer into Hibernate mode. See Using Hibernate Mode (page 28).
Getting Started > Using the Battery Pack Using the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. Installing/Removing the Battery Pack To install the battery pack 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery LOCK switch (1) inward.
Getting Started > Using the Battery Pack n 21 N 3 Slide the battery pack diagonally into the battery compartment until the projection (2) on either side of the battery compartment fits into the U-shaped cut (3) on either side of the battery pack. 4 Push the battery pack down into the compartment until it clicks into place. 5 Slide the battery LOCK switch outward to secure the battery pack on the computer.
Getting Started > Using the Battery Pack n 22 N To remove the battery pack ! You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack while the computer is in Sleep mode. 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery LOCK switch (1) inward.
Getting Started > Using the Battery Pack n 23 N Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. To charge the battery pack 1 Install the battery pack. 2 Connect the computer to a power source with the AC adapter. The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum charge level you selected with the battery charge functions, the charge indicator turns off.
Getting Started > Using the Battery Pack n 24 N ✍ Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer. When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack.
Getting Started > Using the Battery Pack n 25 N Extending Your Battery Life When your computer is running on battery power, you can extend your battery life using the following methods. ❑ Decrease the LCD brightness of your computer screen. ❑ Use the power saving mode. See Using the Power Saving Modes (page 27) for more information. ❑ Change the power saving settings on the Power Options. See Using the VAIO Power Management (page 123) for more information.
Getting Started > Shutting Down Your Computer Safely n 26 N Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer 1 Turn off any peripherals connected to the computer. 2 Click Start and the Shut down button. 3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically. The power indicator light turns off.
Getting Started > Using the Power Saving Modes n 27 N Using the Power Saving Modes You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode, your computer has two distinct power saving modes to suit your preference: Sleep and Hibernate. ! If you do not intend to use your computer for an extended period of time while it is disconnected from AC power, place the computer into Hibernate mode or turn it off.
Getting Started > Using the Power Saving Modes n 28 N Using Sleep Mode To activate Sleep mode Click Start, the arrow next to the Shut down button, and Sleep. To return to Normal mode ❑ Press any key. ❑ Press the power button on your computer. ! If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data. Using Hibernate Mode To activate Hibernate mode Press the Fn+F12 keys.
Getting Started > Updating Your Computer n 29 N Updating Your Computer Be sure to install the latest updates on your computer with the following software applications so that the computer can run more efficiently. ❑ Windows Update Click Start, All Programs, and Windows Update and then follow the on-screen instructions. ❑ VAIO Update 4 Click Start, All Programs, VAIO Update 4, and Go to VAIO Web Support and then follow the on-screen instructions.
Using Your VAIO Computer > n 30 N Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer.
Using Your VAIO Computer > Using the Keyboard n 31 N Using the Keyboard Your keyboard has additional keys that perform model-specific tasks. Combinations and Functions with the Fn Key ✍ Some keyboard functions can be used only after the operating system is finished launching. Combination/Feature Function Fn + % (F2): muting Turns on and off the built-in speakers or the headphones. Fn + 2 (F3/F4): volume control Changes the built-in speaker volume level.
Using Your VAIO Computer > Using the Keyboard Combination/Feature Fn + Fn + / (F9/F10): zooming (F12): hibernation n 32 N Function Changes the size of an image or a document displayed on some software. To make the view look smaller and further away (zoom out), press the Fn+F9 keys. To make the view look bigger and closer (zoom in), press the Fn+F10 keys. See the help file included with the VAIO Control Center for more information. Provides the lowest level of power consumption.
Using Your VAIO Computer > Using the Touch Pad n 33 N Using the Touch Pad You can point to, select, drag, and scroll objects on the screen using the touch pad. Action Description Point Slide your finger on the touch pad (1) to place the pointer (2) on an item or object. Click Press the left button (3) once. Double-click Press the left button twice in a row. Right-click Press the right button (4) once. With many applications, this action displays a context-sensitive shortcut menu (if any).
Using Your VAIO Computer > Using the Switch Function n 34 N Using the Switch Function The Switch function provides three modes that you can customize to suit your mood or environment. If, for example, you customize each mode for business use, personal use, and entertainment use, you can switch the mode to your desired mode just by pressing the MODE button on your computer. You can change the settings for each mode in the VAIO Mode Switch settings window.
Using Your VAIO Computer > Using the Built-in Camera n 35 N Using the Built-in Camera Your computer is equipped with a built-in MOTION EYE camera. With the preinstalled image capture software, you can perform the following: ❑ Capture still images and movies ❑ Sense and capture object movements for monitoring purposes ❑ Edit captured data ✍ Turning on the computer activates the built-in camera. Video conferences are possible with the appropriate software.
Using Your VAIO Computer > Using the Optical Disc Drive Using the Optical Disc Drive Your computer is equipped with an optical disc drive. Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. To insert a disc 1 Turn on the computer. 2 Press the drive eject button (1) to open the drive. The drive tray slides out.
Using Your VAIO Computer > Using the Optical Disc Drive 3 n 37 N Place a disc in the middle of the drive tray with the label side facing upward and gently push it down until the disc clicks into place. ! Do not exert pressure on the drive tray. Be sure to hold the bottom of the drive tray when placing/removing a disc onto/from the tray. 4 Close the drive tray by pushing it in gently. ! Do not remove the optical disc while your computer is in a power saving mode (Sleep or Hibernate).
Using Your VAIO Computer > Using the Optical Disc Drive n 38 N Supported Disc Media Your computer plays and records CDs, DVDs, and Blu-ray Disc™ media, depending on the model you purchased. See the reference chart below to find out which type of optical disc drive supports which types of media.
Using Your VAIO Computer > Using the Optical Disc Drive n 39 N ! This unit is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this unit.
Using Your VAIO Computer > Using the Optical Disc Drive n 40 N Notes on Using the Optical Disc Drive Notes on writing data to a disc ❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive. ❑ Do not strike or shake your computer while the optical disc drive is writing data to a disc. ❑ Do not plug or unplug the power cord or the AC adapter while the optical disc drive is writing data to a disc.
Using Your VAIO Computer > Using the Optical Disc Drive n 41 N Notes on region codes ❑ Region code indicators are labeled on the discs or packages to indicate in which region and on what type of player you can play the disc. Unless the region code indicates "2" (Europe belongs to region "2"), "5" (Russia belongs to region "5"), or "all" (this means that you can play this disc in most regions of the world), you cannot play the disc on your computer.
Using Your VAIO Computer > Using the Optical Disc Drive n 42 N Playing Discs To play a disc 1 Insert a disc into the optical disc drive. ! Connect the AC adapter to the computer and close all running software applications before playing a disc. 2 If nothing appears on the desktop, click Start, All Programs, and your desired software to play the disc. For instructions on how to use the software, see the help file included with the software.
Using Your VAIO Computer > Using "Memory Stick" n 43 N Using "Memory Stick" "Memory Stick" is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable, it can be used for external data storage.
Using Your VAIO Computer > Using "Memory Stick" n 44 N Inserting and Removing "Memory Stick" To insert "Memory Stick" 1 Locate the "Memory Stick" slot. 2 Hold "Memory Stick" with the arrow facing upward and pointing toward the slot. 3 Carefully slide "Memory Stick" into the slot until it clicks into place. ✍ "Memory Stick" is automatically detected by your system and the contents of "Memory Stick" are displayed.
Using Your VAIO Computer > Using "Memory Stick" n 45 N ✍ You can insert Duo-size "Memory Stick" directly into the "Memory Stick" slot without using a "Memory Stick Duo" adaptor. ! Be sure to hold "Memory Stick" with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the media, do not force "Memory Stick" into the slot if you cannot insert it smoothly.
Using Your VAIO Computer > Using "Memory Stick" n 46 N Formatting "Memory Stick" To format "Memory Stick" "Memory Stick" has been formatted by default and is ready for use. If you want to reformat the media with your computer, follow these steps. ! Be sure to use the device that is designed to format the media and supports "Memory Stick" when formatting the media. Formatting "Memory Stick" erases the entire data stored on the media.
Using Your VAIO Computer > Using "Memory Stick" 6 Click Start. 7 Follow the on-screen instructions. ! It may take time to format "Memory Stick" depending on the media type.
Using Your VAIO Computer > Using "Memory Stick" n 48 N Notes on Using "Memory Stick" ❑ Your computer has been tested and found compatible with Sony branded "Memory Stick" with capacity of up to 16 GB that are available as of May 2009. However, not all "Memory Stick" are guaranteed of compatibility. ❑ Inserting "Memory Stick" with multiple conversion adaptors is not guaranteed of compatibility. ❑ "MagicGate" is the general name of the copyright protection technology developed by Sony.
Using Your VAIO Computer > Using Other Modules / Memory Cards n 49 N Using Other Modules / Memory Cards Using the ExpressCard Module Your computer is equipped with an ExpressCard/34 slot* for transferring data among digital cameras, camcorders, music players, and other audio/video devices. This slot can only accommodate an ExpressCard/34 (34 mm wide) module*. * Referred to as the ExpressCard slot and the ExpressCard module in this manual. To insert an ExpressCard module 1 Locate the ExpressCard slot.
Using Your VAIO Computer > Using Other Modules / Memory Cards To remove an ExpressCard module ✍ You can skip steps 1 to 4 when: - your computer is off. - the Safely Remove Hardware icon is not displayed on the taskbar. - the hardware you want to unplug is not displayed in the Safely Remove Hardware window. 1 Locate the ExpressCard slot. 2 Double-click the Safely Remove Hardware icon on the taskbar. 3 Select the hardware you want to unplug and click Stop.
Using Your VAIO Computer > Using Other Modules / Memory Cards n 51 N Using the SD Memory Card Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices.
Using Your VAIO Computer > Using Other Modules / Memory Cards To insert an SD memory card 1 Locate the SD memory card slot. 2 Hold the SD memory card with the arrow facing upward and pointing toward the slot. 3 Carefully slide the SD memory card into the slot until it clicks into place. Do not force the card into the slot. ✍ If the SD memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
Using Your VAIO Computer > Using Other Modules / Memory Cards To remove an SD memory card 1 Locate the SD memory card slot. 2 Check that the Media Access indicator light is unlit. 3 Push in the SD memory card toward the computer and release. The SD memory card ejects. 4 Pull the SD memory card out of the slot.
Using Your VAIO Computer > Using Other Modules / Memory Cards n 54 N Notes on Using Memory Cards General notes on using the memory card ❑ Be sure to use memory cards that are compliant with the standards supported by your computer. ❑ Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.
Using Your VAIO Computer > Using the Internet n 55 N Using the Internet Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for connecting your computer to the Internet.
Using Your VAIO Computer > Using the Internet n 56 N To connect a telephone cable ! The following procedure applies to models with a built-in modem only. 1 Plug one end of the phone cable (1) into the modem port 2 Plug the other end into the wall jack (2). on the computer. ! Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX).
Using Your VAIO Computer > Using the Network (LAN) n 57 N Using the Network (LAN) You can connect your computer to 1000BASE-T*/100BASE-TX/10BASE-T type networks with a LAN cable. Connect one end of a LAN cable (not supplied) to the network (LAN) port on the computer or the optional docking station and the other end to your network. For detailed settings and devices required for LAN access, ask your network administrator. * Available only via the network (LAN) port on the optional docking station.
Using Your VAIO Computer > Using the Wireless LAN n 58 N Using the Wireless LAN Using the Wireless LAN (WLAN), all your digital devices with the built-in WLAN function communicate freely with each other through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio) connection. The WLAN supports all normal LAN connectivity, but with the added benefits of mobility and roaming.
Using Your VAIO Computer > Using the Wireless LAN n 59 N The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz band. The IEEE 802.11g standard provides higher-speed communications than the IEEE 802.11b standard. The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz band. The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.4 GHz or 5 GHz band. Wireless LAN devices using the 2.
Using Your VAIO Computer > Using the Wireless LAN n 60 N Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a LAN is created only by wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home.
Using Your VAIO Computer > Using the Wireless LAN n 61 N To communicate without an access point (ad-hoc) ! The IEEE 802.11a standard, using the 5 GHz band, and the IEEE 802.11n draft standard, using the 2.4 GHz or 5 GHz band, are not available on ad-hoc networks. 1 Turn on the WIRELESS switch. 2 Click the VAIO Smart Network icon on the taskbar. 3 Click the switch next to your desired wireless option(s) to toggle it to On in the VAIO Smart Network window.
Using Your VAIO Computer > Using the Wireless LAN n 62 N Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point (not supplied). The access point bridges the wireless and wired LAN and acts as a central controller for the wireless LAN network. The access point coordinates transmission and reception from multiple wireless devices within a specific range.
Using Your VAIO Computer > Using the Wireless LAN n 63 N To connect to a wireless network 1 Make sure an access point is set up. See the manual that came with your access point for more information. 2 Turn on the WIRELESS switch. 3 Click the VAIO Smart Network icon on the taskbar. 4 Click the switch next to your desired wireless option(s) to toggle it to On in the VAIO Smart Network window. Make sure the WIRELESS indicator light turns on. ! Wireless LAN communication (IEEE 802.
Using Your VAIO Computer > Using the Wireless LAN Stopping Wireless LAN Communications To stop wireless LAN communications Click the switch next to Wireless LAN to toggle it to Off in the VAIO Smart Network window. ! Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.
Using Your VAIO Computer > Using the Bluetooth Function n 65 N Using the Bluetooth Function You can establish wireless communications between your computer and other Bluetooth® devices such as another computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area. Bluetooth Security The Bluetooth wireless technology has an authentication function, which allows you to determine with whom you choose to communicate.
Using Your VAIO Computer > Using the Bluetooth Function n 66 N Communicating with Another Bluetooth Device You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables.
Using Your VAIO Computer > Using the Bluetooth Function n 67 N To communicate with another Bluetooth device To communicate with another Bluetooth device, you first need to set up the Bluetooth function. For setting up and using the Bluetooth function, search Windows Help and Support for Bluetooth information. 1 Turn on the WIRELESS switch. 2 Click the VAIO Smart Network icon on the taskbar. 3 Click the switch next to Bluetooth to toggle it to On in the VAIO Smart Network window.
Using Your VAIO Computer > Using the Bluetooth Function Stopping Bluetooth Communications To stop Bluetooth communications 1 Turn off the Bluetooth device that is communicating with your computer. 2 Click the switch next to Bluetooth to toggle it to Off in the VAIO Smart Network window.
Using Your VAIO Computer > Using the Bluetooth Function n 69 N Notes on Using the Bluetooth Function ❑ The data transfer rate varies, depending on the following conditions: ❑ Obstacles, such as walls, located between devices ❑ Distance between devices ❑ Material used in walls ❑ Proximity to microwaves and cordless telephones ❑ Radio frequency interference and other environmental conditions ❑ Device configuration ❑ Type of software application ❑ Type of operating system ❑ Use of both wireless LAN and Bluet
Using Your VAIO Computer > Using the Bluetooth Function n 70 N ❑ The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous use of the Bluetooth function and wireless communication devices, however, may cause radio interference and result in reduced communication speeds and distances than the standard values.
Using Your VAIO Computer > Using Fingerprint Authentication n 71 N Using Fingerprint Authentication Your computer may be equipped with a fingerprint sensor to provide you with additional convenience. Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer.
Using Your VAIO Computer > Using Fingerprint Authentication n 72 N ❑ Archive encryption ❑ File Safe feature to encrypt/decrypt data With the File Safe feature, you can create an encrypted archive to include a file and/or folder for protection against unauthorized access. The encrypted archive can be decrypted or unlocked for included file/folder access by swiping your finger across the fingerprint sensor or entering the backup password you specified for encryption.
Using Your VAIO Computer > Using Fingerprint Authentication n 73 N Registering a Fingerprint To use the fingerprint authentication function, you must register your fingerprint(s) in your computer. ✍ Set the Windows password on your computer before registration. See Adding the Windows Password (page 119) for the detailed instructions. To register a fingerprint 1 Click Start, All Programs, Protector Suite, and Control Center. 2 Read an end user license agreement thoroughly and click Accept.
Using Your VAIO Computer > Using Fingerprint Authentication If you have failed to register a fingerprint, follow these steps to try again. 1 Place the top joint of your finger on the fingerprint sensor (1).
Using Your VAIO Computer > Using Fingerprint Authentication 2 n 75 N Swipe your finger perpendicularly across the fingerprint sensor. ! Place your fingertip flat in the center of the fingerprint sensor. Scan your fingerprint from the top joint of the finger to the fingertip. Keep your finger in contact with the fingerprint sensor while swiping. Fingerprint registration may fail if you move your finger too quickly or too slowly. Let the fingerprint sensor take about one second to scan your fingerprint.
Using Your VAIO Computer > Using Fingerprint Authentication n 76 N Logging Onto Your System To use the fingerprint authentication function in place of a password entry to log onto your system, you need to set the poweron, hard disk, and Windows passwords and configure your computer for fingerprint authentication. For setting the power-on, hard disk, and Windows passwords, see Setting the Password (page 110). For detailed information, see the help file included with the Protector Suite.
Using Your VAIO Computer > Using Fingerprint Authentication n 77 N Erasing the Registered Fingerprints Before disposing of your computer or transferring it to a third person, it is strongly recommended you erase the fingerprint data registered on the fingerprint sensor after erasing the data stored on your built-in storage device. To erase the registered fingerprints 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears.
Using Your VAIO Computer > Using the TPM n 78 N Using the TPM The Trusted Platform Module (TPM) is embedded in selected models only and provides your computer with basic security functions. In combination with the TPM, you can encrypt and decrypt your data to strengthen computer security against inappropriate access. TPMs are defined by Trusted Computing Group (TCG) and also called security chips. Features and options in this section may not be available on your computer.
Using Your VAIO Computer > Using the TPM n 79 N Important Notice Notes on encrypting the operating system or program files Encrypting files used by your operating system or any software application, using the Encrypting File System (EFS) with the TPM, will disable you to launch or operate such software.
Using Your VAIO Computer > Using the TPM n 80 N Notes on encrypting key files or files on the Personal Secure Drive Encrypting files created in the following folders when your user account is initialized and the EFS is enabled will disable you to launch your TPM software and decrypt the encrypted data. With the default settings, the files in the folders below cannot be encrypted because they have system attributes. Do not change the system attributes of the files in the folders below.
Using Your VAIO Computer > Using the TPM n 81 N Notes on encrypting backup files or other files Encrypting backup archive files or emergency recovery token files will disable you to recover your computer system for emergency, and encrypting password reset token files or secret files will disable you to reset the password.
Using Your VAIO Computer > Using the TPM ❑ Key and certificate backup file Default file name: SpBackupArchive.xml ❑ PSD backup file Default file name: -Personal Secure Drive.fsb ❑ Owner password backup file Default file name: SpOwner_.tpm ❑ Protocol file Default file name: SpProtocol__..
Using Your VAIO Computer > Using the TPM n 83 N Configuring the TPM To use the embedded TPM, you need to: 1 Enable the TPM in the BIOS setup screen. 2 Install the Infineon TPM Professional Package. 3 Initialize and configure the TPM. To enable the TPM in the BIOS setup screen 1 Turn on your computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears.
Using Your VAIO Computer > Using the TPM n 84 N To install the Infineon TPM Professional Package Read the Readme.txt in the C:\Infineon\Readme folder. Then, double-click setup.exe in the C:\Infineon folder to install the package. To install this package, you must have administrative rights on the computer. ! You need to set a few passwords while installing the Infineon TPM Professional Package. Without these passwords, you will not be able to restore any TPM-protected data or backup files.
Using Peripheral Devices > n 85 N Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. ❑ Connecting a Docking Station (page 86) ❑ Connecting External Speakers or Headphones (page 94) ❑ Connecting an External Display (page 95) ❑ Selecting Display Modes (page 101) ❑ Using the Multiple Monitors Function (page 102) ❑ Connecting an External Microphone (page 104) ❑ Connecting a USB Device (page 105) ❑ Connecting an i.
Using Peripheral Devices > Connecting a Docking Station n 86 N Connecting a Docking Station Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external display. A docking station is not supplied with your computer and is available as an optional accessory.
Using Peripheral Devices > Connecting a Docking Station n 87 N Locating Ports on the Docking Station A DC IN indicator Illuminates while the docking station is powered. B C D E IN USE indicator (page 91) UNDOCK button (page 91) DC IN port (page 88) Network (LAN) port (1000BASE-T / 100BASE-TX / 10BASE-T) F Hi-Speed USB (USB 2.0) ports*1 (page 105) G DVI-D port*2 (page 95) H MONITOR port (page 95) *1 Support high-/full-/low- speeds. *2 Functional only on models with the ATI video controller.
Using Peripheral Devices > Connecting a Docking Station n 88 N Attaching Your Computer to the Docking Station ! Be sure to install the battery pack before attaching your computer to the docking station. To attach your computer to the docking station ! Use the AC adapter supplied with your computer. Do not move your computer when it is attached to the docking station. This may detach the docking station and cause damage to both units. 1 Disconnect all peripherals from the computer.
Using Peripheral Devices > Connecting a Docking Station 4 Slide open the docking station connector cover on the bottom of the computer. 5 Align the rear bottom corners of the computer with the guides on the docking station.
Using Peripheral Devices > Connecting a Docking Station 6 Gently push down the computer until it clicks into place. 7 Turn on the computer.
Using Peripheral Devices > Connecting a Docking Station n 91 N Disconnecting Your Computer from the Docking Station ! Make sure that no devices connected to the docking station are in use before disconnecting your computer. Do not disconnect your computer from the docking station while the IN USE indicator light is lit. Disconnecting the computer while the IN USE indicator is lit may result in loss of unsaved data or a failure of the computer.
Using Peripheral Devices > Connecting a Docking Station n 92 N To disconnect your computer from the docking station 1 Press the UNDOCK button (1) and wait until the IN USE indicator light (2) turns off. ✍ If the IN USE indicator is unlit, you do not have to press the UNDOCK button. Pressing the UNDOCK button while your computer is in a power saving mode brings the computer to Normal mode first, and then initiates the disconnection process.
Using Peripheral Devices > Connecting a Docking Station 2 Lift the computer off the docking station. 3 Close the docking station connector cover on the bottom of the computer. n 93 N Alternatively, you can disconnect the computer from the docking station as follows: 1 Click Start, the arrow next to the Shut down button, and Undock. 2 Make sure that a message balloon appears and the IN USE indicator light turns off. Then lift the computer off the docking station.
Using Peripheral Devices > Connecting External Speakers or Headphones Connecting External Speakers or Headphones You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer. To connect external speakers ✍ Make sure your speakers are designed for computer use. ! Turn down the volume of the speakers before you turn them on. Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied).
Using Peripheral Devices > Connecting an External Display n 95 N Connecting an External Display Features and options in this section may not be available on your computer. Connecting a Computer Display or a Projector You can connect an external display, such as a computer display or a projector, either directly to your computer or via the optional docking station.
Using Peripheral Devices > Connecting an External Display n 96 N To connect a computer display or a projector ! The monitor port on your computer is not accessible when the computer is attached to the docking station. The DVI-D port on the docking station is functional only on models with the ATI video controller. 1 Plug the power cord (1) of your external display or the projector into the AC outlet.
Using Peripheral Devices > Connecting an External Display n 97 N ! Your computer is compliant with the HDCP standard and capable of encrypting the transmission channel of digital video signals for the purpose of copyright protection, which enables you to play and view a wide variety of copyright protected and high-quality content. To view the copyright protected content, connect an HDCP-compliant monitor to the HDMI output port on your computer or the DVI-D port on the docking station.
Using Peripheral Devices > Connecting an External Display n 98 N Using the VAIO Presentation Support The VAIO Presentation Support allows you to use handy functions for the presentation, for example, displaying a document for quick reference and the mirror image of the connected external display simultaneously on the computer screen. To use the VAIO Presentation Support 1 Press any of the switch buttons (page 11) to launch the VAIO Presentation Support.
Using Peripheral Devices > Connecting an External Display n 99 N Connecting a TV with an HDMI Input Port If your computer is equipped with an HDMI output port, you can connect a TV with an HDMI input port to your computer. See the specifications to find out about the configuration of your computer. To connect a TV to your computer ! To hear sound from the device connected to the HDMI output port, you need to change the device for sound output.
Using Peripheral Devices > Connecting an External Display n 100 N ✍ See the manual that came with your TV for more information on installation and use. The HDMI cable carries both video and audio signals. To connect a high-quality digital sound output device between your computer and a TV You can connect a high-quality home theater receiver or other surround sound decoder devices between your computer and TV using an HDMI connection.
Using Peripheral Devices > Selecting Display Modes n 101 N Selecting Display Modes When an external display is connected, you can select either your computer screen or the connected display to use as the primary monitor. ! The monitor port on your computer is not accessible when the computer is attached to the docking station.
Using Peripheral Devices > Using the Multiple Monitors Function n 102 N Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display connected to the monitor port, your computer screen and the external display can function as a single desktop. You can move the cursor from one display to the other.
Using Peripheral Devices > Using the Multiple Monitors Function n 103 N To use the Multiple Monitors function ! The monitor port on your computer is not accessible when the computer is attached to the docking station. ✍ Your external display may not support the Multiple Monitors function. Certain software applications may not be compatible with Multiple Monitors settings.
Using Peripheral Devices > Connecting an External Microphone Connecting an External Microphone You can connect an external microphone (not supplied) to your computer. To connect an external microphone Plug the microphone cable (1) into the microphone jack (2) m. ✍ Make sure your microphone is designed for computer use.
Using Peripheral Devices > Connecting a USB Device n 105 N Connecting a USB Device You can connect a Universal Serial Bus (USB) device to your computer, such as a mouse, floppy disk drive, speaker, and printer. To connect a USB device 1 Choose the USB port (1) you prefer to use. 2 Plug the USB device cable (2) into the USB port.
Using Peripheral Devices > Connecting a USB Device n 106 N Notes on connecting a USB device ❑ You may need to install the driver software supplied with your USB device before use. See the manual that came with the USB device for more information. ❑ Be sure to use a USB printer compatible with your version of Windows to print documents. ❑ For information on how to remove a USB device, see the manual that came with the device.
Using Peripheral Devices > Connecting an i.LINK Device n 107 N Connecting an i.LINK Device Your computer is equipped with an i.LINK port which you can use to connect an i.LINK device, such as a digital video camcorder. ✍ i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK connection may vary, depending on a software application, an operating system, and a compatible i.LINK device.
Using Peripheral Devices > Connecting an i.LINK Device n 108 N Connecting a Digital Video Camcorder To connect a digital video camcorder Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV In/ Out port (3) on the digital video camcorder. ✍ The connection procedure varies depending on your compatible i.LINK device. See the manual that came with the device for more information.
Customizing Your VAIO Computer > n 109 N Customizing Your VAIO Computer This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities.
Customizing Your VAIO Computer > Setting the Password n 110 N Setting the Password In addition to the Windows password, you can use BIOS functions to set two types of passwords to protect your computer: the power-on password and the hard disk password. Once you have set the power-on password, you will be prompted to enter the password after the VAIO logo appears to start your computer. The power-on password allows you to protect your computer from unauthorized access.
Customizing Your VAIO Computer > Setting the Password n 111 N To add the power-on password (machine password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 112 N To add the power-on password (user password) ! Make sure you set the machine password before setting the user password. 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the machine password and press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 113 N Changing/Removing the Power-on Password To change or remove the power-on password (machine password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the machine password and press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 114 N To change or remove the power-on password (user password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the user password and press the Enter key. 4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 115 N Adding the Hard Disk Password The hard disk password provides additional security for the data stored on your built-in storage device. If you enable the hard disk password, this adds an extra level of security. When adding the hard disk password, you must set both the master and user passwords. The master password is provided for users with administrative rights on the computer to reset the user password in the BIOS setup screen.
Customizing Your VAIO Computer > Setting the Password n 116 N To add the hard disk password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. ✍ If you have set the power-on password, enter your power-on password. 3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 117 N Changing/Removing the Hard Disk Password To change the hard disk password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. ✍ If you have set the power-on password, enter your power-on password.
Customizing Your VAIO Computer > Setting the Password n 118 N To remove the hard disk password 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. ✍ If you have set the power-on password, enter your power-on password. 3 Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 119 N Adding the Windows Password The Windows password comes in handy when you have to share a single computer with other people. By setting the Windows password, you can protect your user account from unauthorized access. Entry of the Windows password will be prompted after you select your user account. ! Be sure not to forget the password. Write down your password and keep it safe and private from other people.
Customizing Your VAIO Computer > Setting the Password Changing/Removing the Windows Password To change the Windows password 1 Click Start and Control Panel. 2 Click User Accounts and Family Safety or User Accounts. 3 Click User Accounts. 4 Click Change your password. 5 In the Current password field, enter your current password. 6 In the New password and Confirm new password fields, enter a new password. 7 Click Change password. To remove the Windows password 1 Click Start and Control Panel.
Customizing Your VAIO Computer > Using Intel® VT n 121 N Using Intel® VT Intel® Virtualization Technology (VT) allows you to use hardware virtualization software for enhancing your computer's performance. ! Intel VT may not be available depending on the CPU installed on your computer. For information on virtualization and how to use hardware virtualization software, contact the software publisher. To enable Intel VT 1 Turn on your computer. 2 Press the F2 key when the VAIO logo appears.
Customizing Your VAIO Computer > Using the VAIO Control Center n 122 N Using the VAIO Control Center The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior. To use the VAIO Control Center 1 Click Start, All Programs, and VAIO Control Center. 2 Select your desired control item and change the settings. 3 Once finished, click OK. The setting of the desired item has been changed.
Customizing Your VAIO Computer > Using the VAIO Power Management n 123 N Using the VAIO Power Management Power management helps you set up power plans for running on AC or battery power to suit your requirements for power consumption. The VAIO Power Management function is added to the Windows Power Options. With this software application, you can enhance the Windows power management functions to ensure better operation of your computer and longer battery life.
Customizing Your VAIO Computer > Configuring Your Modem n 124 N Configuring Your Modem Follow the steps below to make the settings before using the built-in modem. 1 Click Start and Control Panel. 2 Select Large icons or Small icons from View by in the upper right corner of the window. 3 Click Phone and Modem. 4 Enter the required information, and then click OK. The Phone and Modem window appears. 5 Select your location on the Dialing Rules tab and click Edit. The Edit Location window appears.
Customizing Your VAIO Computer > Protecting the Hard Disk n 125 N Protecting the Hard Disk If your computer is equipped with a built-in hard disk drive, then it has the VAIO HDD Protection utility preinstalled for customizing your settings for protecting your hard disk drive against shock hazards. You can select the sensitivity level of the built-in shock sensor to set the appropriate protection level. See the specifications to find out about the configuration of your computer.
Upgrading Your VAIO Computer > n 126 N Upgrading Your VAIO Computer Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid invalidation of the warranty during your product warranty period, we recommend that: ❑ You should contact your dealer to install a new memory module. ❑ You should not install it yourself, if you are not familiar with upgrading memory on a computer.
Upgrading Your VAIO Computer > Adding and Removing Memory n 127 N Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the amount of memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages. Notes on adding/removing memory modules ❑ Be sure to place your computer on a flat surface before adding or removing memory modules. ❑ Be careful when changing memory.
Upgrading Your VAIO Computer > Adding and Removing Memory n 128 N ❑ Do not open the memory module package before you are ready to change the module. The package protects the module from ESD. ❑ Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD.
Upgrading Your VAIO Computer > Adding and Removing Memory n 129 N Removing and Installing a Memory Module To change or add a memory module 1 Shut down the computer and disconnect all peripheral devices. 2 Unplug the computer and remove the battery pack. 3 Wait about an hour until the computer cools down. 4 Unscrew the screws (indicated by the arrows below) on the bottom of the computer and remove the memory module compartment cover. 5 Touch a metal object to discharge static electricity.
Upgrading Your VAIO Computer > Adding and Removing Memory 6 Grasp the insulation sheet (1) tab and flip open the sheet. ! The insulation sheet is equipped for module protection. Do not pull it so hard as to damage the sheet.
Upgrading Your VAIO Computer > Adding and Removing Memory 7 Remove the currently installed memory module as follows: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). 8 Remove the new memory module from its packaging.
Upgrading Your VAIO Computer > Adding and Removing Memory 9 n 132 N Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any other components on the motherboard. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module.
Upgrading Your VAIO Computer > Adding and Removing Memory n 133 N Viewing the Amount of Memory To view the amount of memory 1 Turn on the computer. 2 Click Start, All Programs, and VAIO Control Center. 3 Click System Information and System Information. You can view the amount of system memory in the right pane. If the additional memory does not appear, repeat the installation procedure and restart the computer.
Precautions > n 134 N Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage.
Precautions > Safety Information n 135 N Safety Information Computer ❑ Use your computer on a solid, stable surface. ❑ We advise not to use your computer directly on your lap. The temperature of the bottom of the unit may rise during normal operation, and after an extended period of time, could cause discomfort or burns. ❑ Provide adequate air circulation to prevent internal overheating.
Precautions > Safety Information n 136 N Battery Pack ❑ Do not leave battery packs in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. ❑ Certain rechargeable battery packs do not meet Sony quality and safety standards. For safety reasons this computer only functions with genuine Sony battery packs designed for this model. If an unauthorized battery pack is installed, the battery pack will not be charged and the computer will not function.
Precautions > Safety Information n 137 N Headphones ❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings. ❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play.
Precautions > Care and Maintenance Information n 138 N Care and Maintenance Information Computer ❑ Clean the cabinet with a soft, dry or lightly moistened cloth with a mild detergent solution. Do not use an abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer. ❑ Make sure you unplug the AC adapter and remove the battery pack before cleaning your computer. LCD Screen Use a soft, dry cloth to wipe the surface of the LCD screen.
Precautions > Handling Your Computer n 139 N Handling Your Computer ❑ If you drop a solid object or any liquid onto your computer, shut down the computer, unplug it, and remove the battery pack. You may want to have the computer checked by qualified personnel before operating it again. ❑ Do not drop your computer or place any objects on top of the computer.
Precautions > Handling Your Computer n 140 N ❑ To avoid losing data when your computer is damaged, back up your data regularly. ❑ Do not exert pressure on the LCD screen or its edges when opening the LCD screen lid or lifting your computer. The LCD screen may be sensitive to pressure or added stress, and exerting pressure may damage the screen or cause it to malfunction. To open the computer, hold the base with one hand and gently lift the LCD screen lid with the other.
Precautions > Handling the LCD Screen n 141 N Handling the LCD Screen ❑ Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be sure to block direct sunlight when using your computer near a window. ❑ Do not scratch the surface of the LCD screen or exert pressure on it. This could cause a damage. ❑ Using your computer in low temperature conditions may produce a residual image on the LCD screen. This is not a malfunction.
Precautions > Using the Power Source n 142 N Using the Power Source See the specifications to find out about the configuration of your computer. ❑ Do not share the AC outlet with other power-consuming equipment, such as a photocopier or a shredder. ❑ You can purchase a power strip with a surge protector. This device helps prevent damage to your computer caused by sudden power surges, in an electrical storm, for example. ❑ Use the AC adapter supplied with your computer or genuine Sony products.
Precautions > Handling the Built-in Camera n 143 N Handling the Built-in Camera ❑ Do not touch the lens protection cover of the built-in camera, as it may cause scratches on the cover and such scratches will appear on the captured images. ❑ Do not let the direct sunlight get into the lens of the built-in camera regardless of your computer's power state, as it may cause the camera to malfunction. ❑ The built-in camera is disabled while videos or still images are imported from an i.
Precautions > Handling Discs n 144 N Handling Discs ❑ Fingerprints and dust on the surface of a disc may cause read errors. Be sure to hold the disc by its edges and central hole, as shown below: ❑ Never affix an adhesive label to a disc. This will affect the use of the disc and may result in irreparable damage.
Precautions > Using the Battery Pack n 145 N Using the Battery Pack ❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures. ❑ Charge battery packs at temperatures between 10°C to 30°C. Lower temperatures require longer charging time. ❑ While the battery pack is in use or being charged, heat builds up in the battery pack. This is normal and is not cause for concern. ❑ You do not need to discharge the battery pack before recharging.
Precautions > Handling "Memory Stick" n 146 N Handling "Memory Stick" ❑ Do not touch the "Memory Stick" connector with your finger or metallic objects. ❑ Use only the adhesive label supplied with "Memory Stick" as a label. ❑ Do not bend, drop, or expose "Memory Stick". ❑ Do not disassemble or modify "Memory Stick". ❑ Do not let "Memory Stick" get wet.
Precautions > Handling the Built-in Storage Device n 147 N Handling the Built-in Storage Device The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be restored. To prevent losing data, you should be careful when handling your computer. Features and options in this section may not be available on your computer.
Precautions > Using Fingerprint Authentication n 148 N Using Fingerprint Authentication Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. ❑ The fingerprint authentication technology does not ensure complete user authentication or complete protection of your data and hardware. Sony assumes no liability for any problems and damages arising out of your use of or inability to use the fingerprint sensor.
Precautions > Using the TPM n 149 N Using the TPM Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. ❑ Although your computer is provided with the TPM security functions, these functions do not ensure complete protection of your data and hardware. Sony assumes no liability for any problems and damages arising out of your use of the functions.
Precautions > Using the TPM n 150 N ❑ Make sure you set up the automatic backup operations after completing the TPM initialization wizard. If the window containing the Run automatic backup now check box is displayed after the setup, select the check box and update the backup files. The restore process using the backup files may fail if you do not set up the automatic backup operations. ❑ The maintenance and management of TPM-protected data must be carried out at your own risk.
Troubleshooting > n 151 N Troubleshooting This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before contacting VAIO-Link. Features and options in this section may not be available on your computer.
Troubleshooting > n 152 N ❑ Audio/Video (page 191) ❑ "Memory Stick" (page 193) ❑ Peripherals (page 194) ❑ Docking Station (page 195)
Troubleshooting > Computer n 153 N Computer What should I do if my computer does not start? ❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit. ❑ Make sure the battery pack is installed properly and charged. ❑ Disconnect all connected USB devices (if any), and then restart your computer. ❑ Remove any extra memory modules you may have installed since purchase, and then restart your computer.
Troubleshooting > Computer n 154 N What should I do if the green power indicator light turns on but my screen remains blank? ❑ Press the Alt+F4 keys several times to close the application window. An application error may have occurred. ❑ If the Alt+F4 keys do not work, click Start, the arrow next to the Shut down button, and Restart to restart your computer. ❑ If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow button and Restart.
Troubleshooting > Computer n 155 N What should I do if my computer or software stops responding? ❑ If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application window. ❑ If the Alt+F4 keys do not work, click Start and the Shut down button to turn off your computer. ❑ If your computer does not turn off, press the Ctrl+Alt+Delete keys and click the Shut down button. If the Windows Security window appears, click Shut Down.
Troubleshooting > Computer n 156 N Why doesn't my computer enter Sleep or Hibernate mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or Hibernate mode. To restore your computer to Normal mode 1 Close all open programs. 2 Click Start, the arrow next to the Shut down button, and Restart. 3 If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart.
Troubleshooting > Computer n 157 N What should I do if a message appears notifying of either incompatibility or the improper installation of the battery pack and my computer then enters Hibernate mode? ❑ This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer and remove the battery pack. Then reinstall the battery pack to the computer. For details, see Installing/Removing the Battery Pack (page 20).
Troubleshooting > Computer n 158 N What should I do if my game software does not work or it keeps crashing? ❑ Check the web site of the game if there are any patches or updates to download. ❑ Make sure you have installed the latest video driver software. ❑ On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in such a case is not guaranteed.
Troubleshooting > Computer n 159 N How can I change the boot device order? You can use one of the BIOS functions to change the boot device order. Follow these steps: 1 Turn on your computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Press the < or , key to select Boot. 4 Press the M or m key to select your desired priority under Boot Priority and press the Enter key.
Troubleshooting > Computer n 160 N How do I reduce the volume of the recovery partition? Your built-in storage device contains the recovery partition where the data for the system recovery is stored. If your computer includes a solid state drive, you might want to reduce the volume of the recovery partition by following these steps: 1 Insert a recovery disc into the optical disc drive while your computer is on, turn off the computer, and then turn it on once again.
Troubleshooting > Computer n 161 N How do I check the volume of the recovery partition? Your built-in storage device contains the recovery partition where the data for the system recovery is stored. To check the volume of the recovery partition, follow these steps: 1 Click Start, right-click Computer, and select Manage. 2 Click Disk Management under Storage in the left pane. The volume of the recovery partition and the total volume of the C drive are displayed in the Disk 0 row in the center pane.
Troubleshooting > System Security n 162 N System Security How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly. You can get important Windows updates by doing the following: ! Your computer must be connected to the Internet to download the updates.
Troubleshooting > Battery n 163 N Battery How do I find the battery charging status? You can check the charge indicator for the battery charging status. See Charging the Battery Pack (page 23) for more information. When is my computer using AC power? When your computer is connected to an AC outlet with the AC adapter, it uses AC power, even if the battery pack is installed.
Troubleshooting > Battery n 164 N Should I be concerned that the installed battery pack is warm? No, it is normal for the battery pack to be warm while it is powering your computer. Can my computer enter Hibernate mode while running on battery power? Your computer can enter Hibernate mode while running on battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode.
Troubleshooting > Built-in Camera n 165 N Built-in Camera Why does the viewfinder show no images or poor-quality images? ❑ The built-in camera cannot be shared by more than one software application. Exit the current application before launching another. ❑ The viewfinder may show some noise, for example horizontal streaks, when you are viewing a rapid-moving object. This is normal and does not indicate a malfunction. ❑ If the problem persists, restart your computer.
Troubleshooting > Built-in Camera n 166 N What should I do if movie playback shows dropped frames while my computer is running on battery power? The battery pack is running out of power. Connect your computer to an AC outlet. What should I do if captured images flicker? This problem occurs when you use the camera under fluorescent lights due to a mismatch between the lighting output frequency and the shutter speed.
Troubleshooting > Internet n 167 N Internet What should I do if my modem does not work? ❑ Make sure the telephone cable is securely plugged into the modem port on your computer and the wall jack. ❑ Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone. ❑ Make sure that the telephone number the program is dialing is correct. ❑ Make sure the software you are using is compatible with your computer's modem.
Troubleshooting > Internet n 168 N Why is my modem connection slow? Your computer is equipped with a V.92/V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, do any of the following: ❑ Ask your telephone company to verify your telephone line is free of any line noise.
Troubleshooting > Networking n 169 N Networking What should I do if my computer cannot connect to a wireless LAN access point? ❑ Connection capability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. ❑ Make sure power to the access point is on.
Troubleshooting > Networking n 170 N ❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. To change the settings, follow these steps: 1 Right-click the power status icon on the taskbar and select Power Options. 2 Click Change plan settings. 3 Click Change advanced power settings. 4 Select the Advanced settings tab. 5 Double-click Wireless Adapter Settings and Power Saving Mode.
Troubleshooting > Networking n 171 N What should I do if I cannot access the Internet? ❑ Check the access point settings. See the manual that came with your access point for more information. ❑ Make sure your computer and the access point are connected to one another. ❑ Move your computer away from obstacles or closer to any access point you may be using. ❑ Make sure your computer is properly configured for Internet access.
Troubleshooting > Networking n 172 N How do I avoid data transfer interruptions? ❑ While your computer is connected to an access point, data transfer interruptions may occur if a large file is exchanged or the computer is placed in close proximity to microwaves and cordless telephones. ❑ Move your computer closer to the access point. ❑ Make sure the access point connection is intact. ❑ Change the access point channel. See the manual that came with your access point for more information.
Troubleshooting > Bluetooth Technology n 173 N Bluetooth Technology What should I do if other Bluetooth devices cannot find my computer? ❑ Make sure both devices have the Bluetooth function enabled. ❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. ❑ You cannot use the Bluetooth function while your computer is in a power saving mode. Bring the computer back to Normal mode, then turn on the WIRELESS switch. ❑ Your computer and the device may be too far apart.
Troubleshooting > Bluetooth Technology n 174 N What should I do if other Bluetooth devices cannot connect to my computer? ❑ Check the suggestions in What should I do if I cannot find the Bluetooth device I want to communicate with? (page 173). ❑ Make sure the other devices are authenticated. ❑ The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on radio wave quality, and on the operating system or the software in use.
Troubleshooting > Bluetooth Technology n 175 N Can I use a device with Bluetooth technology on airplanes? With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and airplanes, may have restrictions on use of Bluetooth devices to avoid radio interference. Check with facility staff to see if use of the Bluetooth function on the computer is permitted.
Troubleshooting > Bluetooth Technology n 176 N What should I do if I do not hear sound from my headphones or audio/video controller? Check the SCMS-T settings. If your headphones or audio/video controller does not support SCMS-T content protection, you need to connect the device using the Advanced Audio Distribution Profile (A2DP). Follow these steps: 1 Click Start and Devices and Printers. 2 Right-click the icon for the device that you want to connect using the A2DP and select Control.
Troubleshooting > Optical Discs n 177 N Optical Discs Why does my computer freeze when I try to read a disc? The disc that your computer is trying to read may be dirty or damaged. Follow these steps: 1 Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer. ! Turning off your computer with the Ctrl+Alt+Delete keys may cause loss of unsaved data. 2 Remove the disc from the optical disc drive. 3 Check the disc for dirt or damage.
Troubleshooting > Optical Discs n 178 N What should I do if I cannot play a disc properly on my computer? ❑ Make sure the disc is inserted into the optical disc drive with the label facing upward. ❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions. ❑ If a disc is dirty or damaged, your computer will stop responding. Follow these steps: 1 Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
Troubleshooting > Optical Discs n 179 N ❑ Make sure the correct driver software is installed. Follow these steps: 1 Click Start and Control Panel. 2 Click System and Security. 3 Click System. 4 Click Device Manager in the left pane. The Device Manager window appears with a listing of your computer's hardware devices. If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the driver software.
Troubleshooting > Optical Discs n 180 N What should I do if I cannot play Blu-ray Disc media or my computer becomes unstable during Blu-ray Disc playback? ❑ Check if your optical disc drive supports the Blu-ray Disc media. ❑ You may not be able to play some Blu-ray Disc content on your computer, or the computer may become unstable during Blu-ray Disc playback. To play content normally, download and install the latest updates for the WinDVD BD using the VAIO Update.
Troubleshooting > Display n 181 N Display Why did my screen go blank? ❑ Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If the computer is in LCD (Video) Sleep mode, press any key to bring the computer back into Normal mode. See Using the Power Saving Modes (page 27) for more information. ❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.
Troubleshooting > Display n 182 N What should I do if I do not see proper images or videos? ❑ Be sure to select True Color (32 bit) for the display colors before using video/image software or starting DVD playback. Selecting any other option may prevent such software from displaying images successfully. To change the display colors, follow these steps: 1 Right-click on the desktop and select Screen resolution. 2 Click Advanced settings. 3 Click the Monitor tab.
Troubleshooting > Display n 183 N Why doesn't my screen display a video? ❑ If the display output is directed to the external display and the external display is disconnected, you cannot display a video on your computer screen. Stop video playback, change the display output to the computer screen, and then restart video playback. See Selecting Display Modes (page 101) for changing the display output. Alternatively, you can press the Fn+F7 keys to change the display output.
Troubleshooting > Display How do I run Windows Aero? To run Windows Aero, follow these steps: 1 Right-click on the desktop and select Personalize. 2 Select your desired theme from Aero Themes. For information about the Windows Aero features, such as Windows Flip 3D, see Windows Help and Support.
Troubleshooting > Printing n 185 N Printing What should I do if I cannot print a document? ❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer. ❑ Make sure your printer is compatible with the Windows operating system installed on your computer. ❑ You may need to install the printer driver software before you use your printer. See the manual that came with your printer for more information.
Troubleshooting > Microphone n 186 N Microphone What should I do if my microphone does not work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone jack on your computer. How can I prevent microphone feedback? Microphone feedback occurs when the microphone receives the sound from a sound output device, such as a speaker. To prevent this problem: ❑ Keep the microphone away from a sound output device.
Troubleshooting > Speakers n 187 N Speakers What should I do if I do not hear sound from the built-in speakers? ❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. ❑ The volume may have been turned off by the Fn+F2 keys. Press them once again. ❑ The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud enough to hear sound.
Troubleshooting > Touch Pad n 188 N Touch Pad What should I do if the touch pad does not work? ❑ You may have disabled the touch pad before connecting a mouse to your computer. See Using the Touch Pad (page 33). ❑ Make sure that a mouse is not connected to your computer. ❑ If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window.
Troubleshooting > Keyboard n 189 N Keyboard What should I do if the keyboard configuration is wrong? The language layout of your computer's keyboard is labeled on the packaging box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. To change the keyboard configuration, follow these steps: 1 Click Start and Control Panel.
Troubleshooting > Floppy Disks n 190 N Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: 1 Close all programs that are accessing the floppy disk drive.
Troubleshooting > Audio/Video n 191 N Audio/Video What should I do if I cannot use my digital video camcorder? If a message appears stating that the i.LINK device is disconnected or turned off, the i.LINK cable may not be securely plugged into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See Connecting an i.LINK Device (page 107) for more information.
Troubleshooting > Audio/Video n 192 N What should I do if I do not hear the sound from the sound output device connected to the HDMI output port, optical output port, or headphones jack? ❑ You need to change the sound output device if you want to hear sound from the device connected to a port, such as the HDMI output port, optical output port, or headphones jack. For the detailed procedure, see How do I change the sound output device? (page 191).
Troubleshooting > "Memory Stick" n 193 N "Memory Stick" What should I do if I cannot use "Memory Stick" that was formatted on a VAIO computer on other devices? You may need to reformat your "Memory Stick". Formatting "Memory Stick" erases all data, including music data previously saved on it. Before you reformat "Memory Stick", back up important data and confirm that "Memory Stick" does not contain files you want to keep.
Troubleshooting > Peripherals n 194 N Peripherals What should I do if I cannot connect a USB device? ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to the AC outlet. ❑ Try using another USB port on your computer.
Troubleshooting > Docking Station n 195 N Docking Station What should I do if an error message appears when I disconnect my computer from the docking station? ❑ When any device inserted or connected to the docking station is in use, you cannot disconnect your computer from the docking station. Save unsaved data, exit applications that are using such devices, and then try again. If the above does not work, shut down your computer and disconnect it from the docking station.
Trademarks > n 196 N Trademarks Sony, VAIO, the VAIO logo, VAIO Control Center, VAIO Power Management, VAIO Power Management Viewer, VAIO Update, and "BRAVIA" are trademarks or registered trademarks of Sony Corporation. and "Memory Stick", "Memory Stick Duo", "MagicGate", "OpenMG", "Memory Stick PRO", "Memory Stick PRO Duo", "Memory Stick PRO-HG Duo", "Memory Stick Micro", "M2", and the "Memory Stick" logo are trademarks or registered trademarks of Sony Corporation.
Trademarks > n 197 N The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. SD Logo is a trademark. SDHC Logo is a trademark. CompactFlash® is a trademark of SanDisk Corporation. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. "PlaceEngine" is a registered trademark of Koozyt, Inc.
Notice > n 198 N Notice © 2009 Sony Corporation. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
n © 2009 Sony Corporation
