N Hardware Guide VGN-S series
n N 1 Read this first Read this first Notice © 2004 Sony Corporation. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
n N 2 Read this first ENERGY STAR As an ENERGY STAR Partner, Sony has determined that this product meets the ENERGY STAR guidelines for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and their office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
n N 3 Read this first Safety Information General ❑ Opening the unit, for whatever reason, could lead to damages that are not covered by the guarantee. ❑ To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. ❑ To prevent fire or shock hazard, do not expose your VAIO computer to rain or moisture. ❑ If reporting a gas leak, do not use the modem or a telephone in the vicinity of the leak. ❑ Avoid using the modem during a severe electrical storm.
n N 4 Read this first Connectivity ❑ Never install modem or telephone wiring during a severe lightning storm. ❑ Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. ❑ Take care when installing or modifying telephone lines. ❑ Use your computer only with the supplied AC adapter. To disconnect your computer completely from mains voltage, unplug the AC adapter. ❑ Make sure that the socket outlet is easily accessible.
n N 5 Read this first Regulatory information Sony hereby declares that this product is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive). Declaration of Conformity The European Union is targeting the free movement of goods for the internal market and to prevent technical barriers to trade.
n N 6 Read this first In case your model is equipped with Wireless LAN, please read the Wireless LAN Regulations leaflet before activating the Wireless LAN functionality. Depending on the country, usage of the Wireless LAN functionality may be restricted. For country-specific details, please refer to the Wireless LAN Regulations leaflet.
n N 7 Read this first Disposing of lithium ion batteries ❑ Do not handle damaged or leaking lithium ion batteries. Dispose of promptly and properly at end-of-life. ❑ Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. ❑ The battery pack used in this device may present a fire or chemical burn hazard if mistreated.
n N 8 Welcome Welcome Congratulations on purchasing a Sony VAIO computer. Sony has combined leading-edge technology in audio, video, computing and communications to provide you with state-of-the-art personal computing. Here are the main features you can enjoy: ❑ Exceptional performance. ❑ Portability - The rechargeable battery pack provides hours of use without AC power.
n N 9 Welcome Documentation pack Your Documentation Pack contains printed information and user guides to read on your computer. The user guides can be found on your desktop through the My Info Centre Icon From My Info Centre, click the My Documentation . icon to see the guides.
n N 10 Welcome Non-printed documentation Click on the desktop icon , then My Documentation to view the VAIO user guides. ❑ The Hardware Guide (this guide) explains the features of your VAIO in detail, how to use these features confidently and safely, connect peripheral devices, upgrade your computer, and more. ❑ The Software Guide describes how to register your VAIO, the software features available with VAIO systems, how to change settings, how to manage drivers and more.
n N 11 Welcome Ergonomic considerations You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments: ❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touchpad, or external mouse.
n N 12 Using your VAIO computer Using your VAIO computer Once you have read and followed the information in the printed Getting Started guide and Specifications sheet, you can start using your computer safely and confidently. Read on to get the most out of using your VAIO computer.
n N 13 Using your VAIO computer Connecting a power source You can use either an AC adapter or a rechargeable battery pack as a power source. Using the AC adapter To use the AC adapter, proceed as follows: 1 Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer. 2 Plug one end of the power cord (3) into the AC adapter. 3 Plug the other end of the power cord into an AC outlet (4). The LED indicator of the AC adapter turns green (5).
n N 14 Using your VAIO computer Using the battery pack The battery pack supplied with your computer is not fully charged at the time of purchase. Certain rechargeable batteries do not meet Sony quality and safety standards. For safety reasons this notebook only functions with genuine Sony batteries designed for this model. When inserting another kind of battery, the battery will not be charged and the notebook will not function.
n N 15 Using your VAIO computer Inserting the battery pack To insert the battery pack, proceed as folows: 1 Slide the battery into the compartment (1) until it clicks into place. 2 Slide the lock lever (2) into the Lock position to secure the battery on the computer. 3 Move the release lever (3) to the Release position. ✍ When the computer is directly connected to AC power and has a battery pack inserted in the battery bay, it uses power from the AC outlet.
n N 16 Using your VAIO computer Charging the battery pack To charge the battery pack, proceed as follows: 1 Connect the AC adapter to the computer. 2 Insert the battery pack. The computer automatically charges the battery (the battery indicator light flashes in a double blink pattern as the battery charges). Depending on your model, your computer has one or two battery indicator lights. ✍ Battery indicator light status Meaning On The computer is using battery power.
n N 17 Using your VAIO computer Removing the battery pack To remove the battery pack, proceed as follows: 1 Turn off the computer and close the cover. 2 Slide the lock lever (1) to the Unlock position. 3 Slide and hold the release lever (2) as indicated and slide the battery away from the computer. ✍ You can remove the battery pack without turning off the computer if it is connected to the mains voltage (AC adapter).
n N 18 Using your VAIO computer Setting up your computer with Sony Notebook Setup The Sony Notebook Setup utility allows you to consult system information, specify preferences for system behaviour, and set up password protection for your VAIO computer. To use Sony Notebook Setup, proceed as follows: 1 Click the Start button on the Windows taskbar. 2 In All Programs, select Sony Notebook Setup and then click Sony Notebook Setup. The Sony Notebook Setup window appears.
n N 19 Using your VAIO computer Tab Description Automatic Brightness (depending on your model) By default, the light sensor senses the brightness from outside and the display brightness is adjusted accordingly. This setting only applies when the display is set to automatic brightness mode. Press the brightness button to set the display to automatic brightness mode. You can adjust the general level of the automatic brightness mode in this tab. There are 3 possibilities: Brightest, Standard and Darkest.
n N 20 Using your VAIO computer Shutting down your computer safely It is important that you shut down your computer properly so you do not lose unsaved data. To shut down your computer, proceed as follows: 1 Turn off any peripherals connected to your computer. 2 Click the Start button. 3 Click Turn Off Computer. The Turn off computer window appears. 4 Click Turn Off.
n N 21 Using your VAIO computer Using the keyboard Your keyboard is very similar to a desktop computer’s, but has additional keys that perform specific notebook-related tasks. For more information on the standard keys, please go to the Windows Help and Support Center. The VAIO-Link website (www.vaio-link.com) also contains glossary information to help you use the keyboard.
n N 22 Using your VAIO computer ! ✍ Combinations/Feature Functions FN + B Activates BassBoost. This means that the bass sound level is enhanced at all levels without distorting other frequencies (only with headphones). * This function can only be used by the first user to log on. It will not work if you have switched to another user account. If another user wants to display on an external monitor or TV, use the monitor properties to switch to an external monitor or TV.
n N 23 Using your VAIO computer Troubleshooting sound My speakers are not producing sound ❑ The speaker volume may be turned to the minimum. Press + and then ❑ If your computer is powered by battery, check that the battery is inserted properly and that it is charged. ❑ If you are using an application that has its own volume control, check that the volume is turned up. ❑ Check the volume controls in Windows. or to increase the volume.
n N 24 Using your VAIO computer Indicators Indicator Functions Power Power on: lights green. Standby mode: flashes umber. Battery Indicates the status of the battery. Wireless LAN Turns on when the Wireless LAN is activated. Turns off when the Wireless LAN is not activated. Bluetooth indicator Turns blue when the Bluetooth functionality is available. Memory Stick PRO Turns on when the Memory Stick is in use. Turns off when the Memory Stick is no longer in use.
n N 25 Using your VAIO computer Using the touchpad The keyboard contains a cursor-pointing device, your touchpad (1). You can point to, select, drag, and scroll objects on the screen using the built-in touchpad. Action Description Point Slide one finger on the touchpad to place the pointer (2) on an item or object. Click Press the left button (3) once. Double-click Press the left button twice. Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.
n N 26 Using your VAIO computer Using the disc drive Your computer is equipped with a disc drive. See the Specifications sheet for details on your model. To insert a disc, proceed as follows: 1 Turn on the computer. 2 Press the eject button (1) to open the drive. The tray slides out. 3 Place a disc in the middle of the tray with the label side facing up until the disc clicks into place. 4 Close the tray by pushing it gently. ✍ See the Troubleshooting Guide if you have problems using discs.
n N 27 Using your VAIO computer Reading and writing CDs and DVDs To achieve optimum performance when writing data on to disc (also called ’burning’), follow these recommendations : ❑ To make the data on a disc readable on an optical drive, you need to close the session when you eject it. To complete this process, follow the instructions included with your software. ❑ Only use circular discs. Do not use discs with any other shape (star, heart, card, etc.), as this may damage the disk drive.
n N 28 Using your VAIO computer Playing DVDs To achieve optimum performance when playing DVDs, you should follow these recommendations. ❑ You can play DVDs using the optical drive and the WinDVD for VAIO software. See the help file on the WinDVD for VAIO software for details. ❑ Close all open applications before playing a DVD movie. ❑ Do not use resident disc utilities or resident utilities to speed up the access of discs, because they may cause the system to become unstable.
n N 29 Using your VAIO computer Troubleshooting optical disc drive I cannot switch from LCD display to TV and vice versa If a DVD disc is inserted in the optical drive, remove the disc. My disc drive tray does not open ❑ Make sure the computer is turned on and press the eject button on the drive. ❑ Click Start, and select My Computer. Right-click the optical disc drive and select Eject. ❑ Make sure the computer is not in Standby or Hibernate mode.
n N 30 Using your VAIO computer I cannot play a DVD ❑ If a region code warning appears when you are using the DVD player, it could be that the DVD you are trying to play is incompatible with the DVD drive on your computer. The region code is listed on the packaging of the disc. ❑ Change the resolution under Control Panel - Display to a lower resolution. ❑ If you see video but cannot hear sound, check all of the following: ❑ Make sure the mute setting is off on your DVD player.
n N 31 Using your VAIO computer I cannot play a DVD when using two screens ❑ You will not have a problem in the following situations: ❑ When you use a CRT or an LCD display on its own. ❑ When you play MPEG files which are recorded on the hard drive with Windows Media Player 9. The reading speed of CD/DVD-RWs is very slow Generally, the reading speed of a CD/DVD-RW is slower than that of a -ROM or -R. The reading speed can also vary depending on the type of format.
n N 32 Using your VAIO computer Using PC Cards Your computer includes one or two PC Card slots (depending on your model). PC Cards allow you to connect portable external devices. Please see your printed Specifications sheet to see if your computer has one or two PC Card slots. You do not need to shut down your computer when inserting a PC Card. Inserting a PC Card To insert a PC Card, proceed as follows: 1 Insert the PC Card into one of the PC Card slots with the front label facing upwards.
n N 33 Using your VAIO computer If an “!” mark appears on the Device Manager tab in the System Properties dialog box, remove the software driver and then reinstall it. You do not need to shut down the computer before inserting or removing a PC Card. Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC Card in the correct direction. See the manual supplied with your PC Card for more information on use.
n N 34 Using your VAIO computer Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 7. To remove a PC Card, proceed as follows: 1 Double-click the Safely Remove Hardware icon in the system tray. The Safely Remove Hardware dialog box appears. 2 Select the hardware you want to unplug. 3 Click Stop.
n N 35 Using your VAIO computer Troubleshooting PC Card My PC Card is not working ❑ Make sure the PC Card is compatible with your version of Windows. ❑ Use the Sony Notebook Setup utility to disable devices you are not currently using.
n N 36 Using your VAIO computer Using the Memory Stick Your VAIO computer is designed to support the Memory Stick. The Memory Stick is a compact, portable, and versatile device especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and CLIE handheld devices. Because it is removable, it can be used for external data storage.
n N 37 Using your VAIO computer Write-protecting a Memory Stick Some Memory Sticks are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting. Move the tab horizontally or vertically* to set or release write-protection. When the erasure prevention switch is off, data can be saved on the Memory Stick. When the erasure prevention switch is on, data can be read from but not saved on the Memory Stick.
n N 38 Using your VAIO computer Inserting a Memory Stick There are 2 ways you can insert a Memory Stick in your computer: ❑ Using the Memory Stick slot; ❑ Using a PC Card slot. To do this, you need an optional PC Card adapter. You can only insert one Memory Stick at a time. To insert a Memory Stick using the Memory Stick slot, proceed as follows: 1 Once you have stored your data from your digital device, insert the Memory Stick with the arrow facing up and toward the Memory Stick slot.
n N 39 Using your VAIO computer Removing a Memory Stick To remove a Memory Stick using the Memory Stick slot, proceed as follows: 1 Check that the access light is off. 2 Push the Memory Stick in towards the computer. The Memory Stick ejects. 3 Pull the Memory Stick out of the slot. ✍ Always remove the Memory Stick gently, or it may pop out unexpectedly. It is recommended that you remove the Memory Stick before shutting down the computer.
n N 40 Using your VAIO computer Using the modem Your computer is equipped with an internal modem. You need to connect to a phone line to take advantage of online services and the Internet, as well as to register your computer and software online, and to contact VAIO-Link. To connect a phone line, proceed as follows: 1 Plug one end of the phone cable (1) into the phone line jack 2 Plug the other end into the wall jack (2). on the computer.
n N 41 Using your VAIO computer Troubleshooting the modem My modem does not work or cannot establish a connection ❑ Check that the phone line is plugged into your computer. ❑ Make sure that the modem is the only device connected to your phone line. ❑ Check that the phone line is working. You can check the line by plugging in an ordinary phone and listening for a dial tone. ❑ Check that the phone number the program is dialling is correct.
n N 42 Using your VAIO computer My modem connection is slow Many factors influence modem connection speed, including telephone line noise or compatibility with telephone equipment (such as fax machines or other modems). If you think your modem is not connecting properly to other PC-based modems, fax machines, or your Internet Service Provider, check the following: ❑ Have your phone company check that your phone line is free from any line noise.
n N 43 Using your VAIO computer Using the Bluetooth functionality Your notebook is equipped with the Bluetooth functionality. The Bluetooth wireless technology enables you to establish wireless communication between your notebook and other Bluetooth devices such as a notebook, a CLIE, a mobile phone or a modem station without any cable within a 10 metres range in open space. All Bluetooth communications are made in conjunction with the BlueSpace NE software.
n N 44 Using your VAIO computer Bluetooth security The Bluetooth wireless technology has an authentication function, which allows you to make sure with whom you communicate. With the authentication function, you can avoid any anonymous Bluetooth device to access your notebook. The first time two Bluetooth devices communicate, a common Passkey (a password required for authentication) should be determined for both devices to be registered. Once a device is registered, there is no need to reenter the Passkey.
n N 45 Using your VAIO computer 5 Click the Service Discovery button to find the services available for the selected device. Sometimes when using a remote device, the confirmation for the authentication dialog box is displayed. 6 Click Yes and the Bluetooth Connection Wizard appears. 7 Click Next to continue. 8 Enter the same passkey in both your local and your remote device, and then click Next.
n N 46 Using your VAIO computer Communicating with another Bluetooth device using the connection navigation With the BlueSpace NE connection navigation, you can easily establish a Bluetooth connection and transfer data, such as files or pictures, to another Bluetooth device*. To use the BlueSpace NE connection navigation, proceed as follows: 1 Turn on the Wireless switch. 2 When the Switch wireless devices dialog box appears, select Bluetooth, and the application will start automatically.
n N 47 Using your VAIO computer Troubleshooting Bluetooth I cannot use the Bluetooth function ❑ If the Bluetooth LED is off, turn on the Wireless switch. ❑ You cannot use the Bluetooth function when the computer is in a power saving mode. Return to normal mode, then turn on the Wireless switch located on your notebook. ❑ If the Wireless switch is ON and you have selected the Wireless LAN option, click on the Wireless Switch icon in the system tray and select Bluetooth.
n N 48 Using your VAIO computer ❑ If the device with which you want to communicate is already communicating with another Bluetooth device, it may not be found or it may not be able to communicate with your notebook. ❑ Check that the Bluetooth function of the device with which you want to communicate is on. See the other device’s manual for more details.
n N 49 Using your VAIO computer Using Wireless LAN (WLAN) Thanks to Sony’s Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each other through a powerful network. A WLAN is a network in which a mobile user can connect to a local area network (LAN) through a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.
n N 50 Using your VAIO computer Communicating without Access Point (ad-hoc) An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or Access Point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home. To communicate without Access Point (ad-hoc), proceed as follows: 1 Turn on the Wireless switch.
n N 51 Using your VAIO computer 6 Enter a Network name (SSID)*. You can choose a 6-digit name. 7 Select Open from the Network Authentication drop-down box. 8 Select WEP from the Data Encryption drop-down box. 9 Deselect the The key is provided for me automatically option button. Some information becomes visible. 10 Fill in the Network key*. The network key should be 5 or 13 ASCII characters or 10 or 26 hexadecimal characters long. You can choose whatever you want**.
n N 52 Using your VAIO computer ** ASCII: The basis of character sets used in almost all present-day computers. ASCII is a code for representing English characters as numbers, with each letter assigned a number from 0 to 127. Hexadecimal: A number representation using the digits 0-9, with their usual meaning, plus the letters A-F (or a-f) to represent hexadecimal digits with values of (decimal) 10 to 15. ✍ In France, only certain channels are legally allowed when using WLAN outdoors.
n N 53 Using your VAIO computer Communicating with an Access Point (infrastructure) W IR EL ES S LA N A C C ES S PO IN T P W OW I NE REL ER TW ES OR S K An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an Access Point, for example the Sony PCWA-A320 Access Point. The Access Point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN.
n N 54 Using your VAIO computer 5 Type the Network Key. If you are using the Sony Access Point PCWA-A320, by default, you don’t need to enter any encryption key (WEP/WPA). To be able to communicate, you must select the box Allow me to connect to the selected wireless network, even though it is not secure. 6 Click Connect. After 30 seconds, the connection is established. For more information about setting up an access point, see the documentation supplied with your Access Point.
n N 55 Using your VAIO computer Using the Wi-Fi protected access (WPA) WPA is a wireless security enhancement that allows you to transfer data in a highly secure way*. To use WPA on your notebook, proceed as follows: 1 Turn on the Wireless switch. If your notebook supports Bluetooth, the Switch wireless devices dialog box appears. Select Wireless LAN and click OK. The Wireless Switcher button changes into Wireless LAN. 2 Right-click the network icon in the taskbar displaying Wireless Network Connection.
n N 56 Using your VAIO computer Wireless LAN channel selection In a 802.11b/g configuration, channel 1 to 13 can be used. (a) With an Access Point ("Infrastructure") ❑ The channel used will be the channel selected by the Access Point. ❑ ATT: For details on how to select the channel that will be used by the Access Point, please refer to the corresponding Instruction Manual. (b) Without Access Point ("Ad-Hoc") ❑ If the Wireless connection is initiated by the VAIO computer, channel 11 will be selected.
n N 57 Using your VAIO computer Troubleshooting Wireless LAN I cannot use the Wireless LAN function ❑ Check if the Wireless switch is turned on. ❑ Check if Wireless LAN is selected in case of models with Bluetooth and Wireless LAN. The Wireless LAN Access Point and your computer cannot communicate ❑ Check if the Wireless switch is turned on. ❑ Check if the power of the Access Point is turned on. ❑ Check if Wireless LAN is selected in case of models with Bluetooth and Wireless LAN.
n N 58 Using your VAIO computer ❑ It is possible that your Access Point communicates at the same time with another Access Point. Read the manual of the Access Point. ❑ If several computers communicate with the same Access Point, the concentration may be too high. Wait a few minutes and try to access again. ❑ If a Wireless LAN device using the IEEE 802.11g standard communicates with a device using the IEEE 802.11b standard, then it is normal that the speed reduces. Devices using the IEEE 802.
n N 59 Using your VAIO computer Using power saving modes When you use a battery as the source of power for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
n N 60 Using your VAIO computer If the computer is not used for 25 minutes, it will enter System Standby mode when running on AC power. When running on batteries, the computer also will enter System Standby mode after 25 minutes if unused. To avoid this, you can change the settings in the Power Options Properties screen (right-click the power status icon in the taskbar - select Adjust Power Properties - select the Power Schemes tab and change the settings in Settings for VAIO optimized power scheme).
n N 61 Using your VAIO computer Troubleshooting power management The power management setting is not responding Your computer’s operating system may become unstable if a lower power state, such as Hibernate is initiated, and then changed before the computer completely enters the lower power state. To restore the computer to its normal operating stability, proceed as follows: 1 Close all open applications. 2 Press ++ simultaneously and select Restart from the drop-down list.
n N 62 Using your VAIO computer Managing power with VAIO Power Management Power management helps you to set up power schemes of your computer that is running on AC power or batteries to suit your requirements for power consumption. VAIO Power Management is a software application developed exclusively for VAIO computers. With this software application, you can enhance the Windows power management functions to ensure better operations of your computer and for longer battery life.
n N 63 Using your VAIO computer Activating VAIO Power Management power schemes VAIO Power Management provides several predefined power schemes. Each power scheme consists of a group of power management settings that are designed to meet specific power management goals, ranging from maximum power management to no power management. To activate a VAIO Power Management power scheme, proceed as follows: 1 Open Adjust Power Properties. 2 Select the Power Schemes tab.
n N 64 Using your VAIO computer ✍ If you have a mobile CPU (see the printed Specifications sheet), a CPU control icon may appear in the taskbar. The CPU control icon indicates the CPU control status (Performance, Adaptive, Battery Life, Degrade). To make the icon appear, click the Advanced button on the VAIO Power Management tab. Select the Show CPU status icon in the taskbar box and then click OK.
n N 65 Using your VAIO computer VAIO Power Management Viewer Depending on your model, VAIO Power Management Viewer is installed on your computer. To start VAIO Power Management Viewer, proceed as follows: Click on the VAIO Power Management tab. Alternatively, you can click Start, point to All Programs and VAIO Power Management, and then click VAIO Power Management Viewer to start the viewer. VAIO Power Management Viewer is provided with two tabs: Running on batteries and Plugged in.
n N 66 Connecting peripheral devices Connecting peripheral devices You can add functionality to your computer by using the various ports on your unit.
n N 67 Connecting peripheral devices Connecting a port replicator Your computer supports the use of an optional port replicator. Attaching a port replicator enables you to connect additional peripherals to your computer, such as a printer or an external display.
n N 68 Connecting peripheral devices Attaching your computer to the port replicator If your computer is equipped with a port replicator, proceed as follows : 1 Disconnect all peripherals from the computer. 2 Plug the cable attached to the AC adapter (1) into the DC In port (2) on the port replicator (3). 3 Plug the power cord (4) into the AC adapter and an AC outlet. 4 Open the port replicator cover.
n N 69 Connecting peripheral devices 5 Slide out the front lever. 6 Align the bottom connector of the notebook with the connector on the port replicator and push down until it clicks into place. 7 Turn on the notebook. ✍ Use the AC adapter that comes with your notebook or the optional Sony adapter.
n N 70 Connecting peripheral devices Disconnecting your computer from the port replicator To disconnect your computer from the port replicator, proceed as follows: 1 Stop the connected periperals. 2 Push the release levers (1) at the same time. 3 Lift the computer away from the port replicator. 4 Close the port replicator connector cover on the bottom of your computer. ✍ It is extremely important to close the port replicator connector cover after removing your computer from the port replicator.
n N 71 Connecting peripheral devices Connecting an external display You can connect an external display to your computer. For example, you can use your computer with a computer display or a projector. ✍ Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display. Connect the power cord after connecting all other cables. Turn on the peripherals, then turn on your computer. Connected external displays are used as second screens.
n N 72 Connecting peripheral devices Connecting a computer display You can connect a computer display (monitor) either directly to your computer or via the (optional) port replicator. To connect a computer display, proceed as follows: 1 If you want to connect a VGA monitor, plug the display cable (1) (not supplied) on the notebook or on the port replicator. 2 If you want to connect a TFT/DVI monitor, plug the display cable (not supplied) into the DVI-D connector on the port replicator.
n N 73 Connecting peripheral devices Connecting a multimedia computer display You can connect the computer to a multimedia computer display that includes built-in speakers and a microphone. To connect a multimedia computer display, proceed as follows: 1 Plug the display cable (1) into the monitor/VGA connector (2) computer. on the 2 Plug the speaker cable (3) into the headphone connector (4) computer. on the 3 Plug the microphone cable (5) into the microphone connector (6) computer.
n N 74 Connecting peripheral devices Connecting a projector You can connect a projector (such as the Sony LCD projector) directly to your computer or via the port replicator. To connect a projector, proceed as follows: 1 Plug the RGB signal cable (1) into the monitor/VGA connector (2) identified by the symbol. 2 Plug the audio cable (3) (not supplied) into the earphone connector (4) identified by the symbol. 3 Plug the RGB signal cable and the audio cable into the connectors of the projector (5).
n N 75 Connecting peripheral devices Selecting display modes This model uses the MOBILITY RADEON video controller. You can select which display is used when the computer is connected to an external display. When you connect an external display, you can switch the display between your computer's LCD and the external monitor. Before you can select a display, you need to shut down your computer, connect the external display (FDP (Flat Display Panel), panel or monitor to your computer, and restart.
n N 76 Connecting peripheral devices Using the Dual Display function The dual display function allows you to distribute portions of your desktop across separate displays. For example, if you have an external monitor attached to the monitor connector, your LCD display and the monitor can function as a single desktop. You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window or a toolbar, from one display to the other.
n N 77 Connecting peripheral devices Selecting the Dual Display mode To select the Dual Display mode, proceed as follows: 1 Click the Start button on the Windows taskbar. 2 Click Control Panel. 3 Click Appearance and Themes. 4 Click the Display icon. 5 Select the Settings tab. 6 Click the display marked 2. 7 Select the Extend my Windows desktop onto this monitor check box. 8 Click Apply and then OK. ✍ Your monitor or TV hardware may not support the Dual Display function.
n N 78 Connecting peripheral devices 8 Use the slider in the Screen resolution to adjust the resolution. 9 Click Apply and then OK. Customizing the virtual desktop You can customize the Dual Display mode by changing the position of the two monitors comprising the virtual desktop. To customize Dual Display mode, proceed as follows: 1 Click the Start button on the Windows taskbar. 2 Click Control Panel. 3 Click Appearance and Themes. 4 Click the Display icon. 5 Click the Settings tab.
n N 79 Connecting peripheral devices 7 ✍ Deselect the Extend my Windows desktop onto this monitor option. This will disable the Dual Display. For switching from Primary to Secondary display, see the section Selecting display modes (page 75).
n N 80 Connecting peripheral devices Connecting external speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers, proceed as follows: 1 Plug the speaker cable (1) into the headphone connector (2). 2 Plug the other end of the speaker cable into the external speaker (3). 3 Turn down the volume of the speakers before you turn them on. ✍ Make sure your speakers are designed for computer use.
n N 81 Connecting peripheral devices Connecting an external microphone If you need to use a sound input device, for example to chat on the Internet, you need to plug in an external microphone. To connect an external microphone, proceed as follows: Plug the microphone cable (1) into the microphone connector (2) identified by the ✍ symbol. Make sure your microphone is designed for computer use.
n N 82 Connecting peripheral devices Connecting a Universal Serial Bus (USB) device You can connect a USB device (for example, a mouse, floppy disk drive, keyboard, printer) to your computer. USB devices are hot plug and play devices. You do not need to shut down your computer prior to connecting these devices unless the manual supplied with the device states otherwise. For some USB devices you need to install the software before you connect the device.
n N 83 Connecting peripheral devices Connecting a USB mouse To connect a USB mouse, proceed as follows: 1 Choose the USB connector (1) you prefer to use. 2 Plug the USB mouse cable (2) into the USB connector. You can use your USB mouse (3). ✍ The VAIO USB mouse software driver is preinstalled on your computer, therefore, you only need to plug the USB mouse into the USB connector and you can start working.
n N 84 Connecting peripheral devices Connecting a USB floppy disk drive As an optional extra, you can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive, proceed as follows: 1 Choose the USB connector you prefer to use. 2 Plug the USB floppy disk drive cable into the USB connector. The VAIO logo on the disk drive should be facing up. Your USB floppy disk drive is now ready for use.
n N 85 Connecting peripheral devices Inserting a floppy disk To insert a floppy disk, proceed as follows: 1 Hold the disk (1) with the label side facing up. 2 Gently push the disk into the drive (2) until it clicks into place. Removing a floppy disk To remove a floppy disk, proceed as follows: When you have finished using the floppy disk, wait until the LED indicator (1) turns off and then press the eject button (2) to remove the disk.
n N 86 Connecting peripheral devices Troubleshooting floppy disks My USB floppy disk drive cannot write to a floppy disk ❑ The floppy disk is write-protected. Disable the write-protect feature or use a floppy disk that is not write-protected. ❑ Check that the disk is properly inserted into the floppy disk drive. ❑ Your disk may be corrupt. Try to insert another floppy disk.
n N 87 Connecting peripheral devices Connecting a printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a printer using the USB connector You can connect a USB printer compatible with your version of Windows to your computer. To connect a printer using the USB connector, proceed as follows: 1 Plug a USB printer cable (1) into one of the USB connectors (2) on your computer. A USB connector is identified by the symbol on your computer and printer.
n N 88 Connecting peripheral devices Connecting a printer using the printer connector To connect a printer using the printer connector, proceed as follows: 1 Plug the printer cable (1) supplied with the printer into the printer connector (2) identified by the 2 Plug the printer power cord (3) into an AC outlet. ✍ Turn off your computer and the printer, unplug the AC adapter and the power cord before connecting the printer. symbol.
n N 89 Connecting peripheral devices Connecting an i.LINK device Your computer includes an i.LINK (IEEE1394) connector, which you can use to connect to an i.LINK device such as a digital video camera recorder or to connect two VAIO notebooks in order to copy, delete or edit files. The i.LINK connector of your computer does not supply power to external devices generally powered by i.LINK connectors. The i.
n N 90 Connecting peripheral devices Connecting a digital video camera recorder To connect a digital video camera recorder, proceed as follows: 1 Plug one end of the i.LINK cable (1) into the i.LINK connector (2) of the computer and the other end into the DV Out connector (3) on the digital video camera recorder. 2 Launch the DVgate Plus application. ✍ On Sony digital video cameras, connectors labelled DV Out, DV In/Out or i.LINK are i.LINK-compatible.
n N 91 Connecting peripheral devices Troubleshooting i.LINK devices I cannot establish an i.LINK connection between two VAIO computers ❑ You must have administrator rights on your computer to be able to link the two. ❑ Disconnect then reconnect the i.LINK cable. ❑ If you still have no connection after waiting for a while, restart both computers. ❑ If either computer has just returned from a power saving mode, the connection may be affected.
n N 92 Connecting peripheral devices Connecting to a network (LAN) You can connect your computer to 10BASE-T/100BASE-TX-type networks via an Ethernet network cable. For the detailed settings and devices needed to connect to the network, consult your Network Administrator. ✍ The default settings make your computer able to connect to the network. If the main unit is docked, you can only use the Ethernet network connector on the port replicator.
n N 93 Upgrading your VAIO computer Upgrading your VAIO computer Your computer and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee by mishandling, it is recommended that: ❑ You contact your dealer to install a new memory module. ❑ You do not install it yourself, if you are not familiar with upgrading memory on a computer. ❑ You do not touch the connectors or open the memory panel.
n N 94 Upgrading your VAIO computer ❑ Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory Module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with an unpainted metal portion of the chassis while performing the procedure.
n N 95 Upgrading your VAIO computer Removing and installing a memory module To change or add a memory module, proceed as follows: 1 Shut down your computer and disconnect all peripheral devices. 2 Unplug the computer and remove the battery pack. 3 Wait until the computer cools down. 4 Unscrew the 2 screws at the bottom of your computer. 5 Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity.
n N 96 Upgrading your VAIO computer 9 Close the module cover, then tighten the screws on the bottom of the computer. 10 Reinsert the battery and turn the computer on.
n N 97 Upgrading your VAIO computer Viewing the amount of memory To view the amount of memory, proceed as follows: 1 Turn on the computer. 2 Go to Sony Notebook Setup via the Start menu. The Sony Notebook Setup dialog box appears. 3 In the About this Computer tab you can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and restart the computer.
n N 98 Getting help Getting help This section describes how to get help and support if something goes wrong with your computer. Sony offers you many support options for your computer. Sony support options Please see the section Documentation pack (page 9) for details on the printed and online documentation delivered with your computer, as well as further sources of reference. Other sources of information ❑ Go to the online help files that accompany your software for instructions on using the software.
n N 99 Getting help e-Support What is e-Support? You have searched our user guides and website (www.vaio-link.com) but have not found an answer to your question/issue? e-Support is the ideal solution for you! Our e-Support Web Portal is an interactive website on which you can submit any technical query you may have regarding your VAIO and receive answers from our dedicated support team.
n N 100 Getting help Can I submit my questions at any time? Yes, you can submit your questions 24/7, but please keep in mind that our e-Support Team can only treat your queries from Monday till Friday between 8am and 6pm.
n N 101 Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage. Please contact VAIO-Link if you need assistance.
n N 102 Precautions On handling the hard disk The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock or dust. Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer. To avoid damaging your hard disk: ❑ Do not subject your computer to sudden movements. ❑ Keep the computer away from magnets.
n N 103 Precautions ❑ The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red, blue, or green) that continuously appear on the LCD. This is a normal result of the manufacturing process and does not indicate a malfunction. ❑ Avoid rubbing the LCD screen, as this can damage the screen. Use a soft, dry cloth to wipe the LCD screen. On using the power source ❑ See the printed Specifications sheet to check the power operation of your VAIO.
n N 104 Precautions ❑ Do not place your computer in a location subject to: ❑ Heat sources, such as radiators or air ducts, ❑ Direct sunlight, ❑ Excessive dust, ❑ Moisture or rain, ❑ Mechanical vibration or shock, ❑ Strong magnets or speakers that are not magnetically shielded, ❑ Ambient temperature of more than 35ºC or less than 5ºC, ❑ High humidity. ❑ Do not place electronic equipment near your computer. The electromagnetic field of your computer may cause a malfunction.
n N 105 Precautions On handling floppy disks ❑ Do not open the shutter manually or touch the surface of the floppy disk. ❑ Keep floppy disks away from magnets. ❑ Keep floppy disks away from direct sunlight and other sources of heat. On handling discs ❑ Do not touch the surface of the disc. ❑ Do not drop or bend the disc. ❑ Fingerprints and dust on the surface of a disc may cause read errors.
n N 106 Precautions On using the battery pack ❑ Never leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. ❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures. ❑ Charge the batteries at temperatures between 10°C to 30°C. Lower temperatures require a longer charging time. ❑ While the battery is in use or being discharged, the battery pack heats up.
n N 107 Precautions On using headphones ❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings. ❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play.
n N 108 Trademarks Trademarks Sony, Battery Checker, BlueSpace NE, Click to DVD, DVgate Plus, Giga Pocket, HotKey Utility, Memory Stick Formatter, Network Smart Capture, PictureGear Studio, SonicStage, Sony Notebook Setup, VAIO Edit Components, VAIO Media, VAIO Power Management, VAIO Power Management Viewer, VAIO System Information, Memory Stick, the Memory Stick logo, VAIO and the VAIO logo are trademarks of Sony Corporation.
