N User Guide Personal Computer VGN-NS series
n 2 N Contents Before Use.......................................................................... 4 Finding More about Your VAIO Computer .................... 5 Ergonomic Considerations ............................................ 7 Getting Started.................................................................... 9 Locating Controls and Ports........................................ 10 About the Indicator Lights ........................................... 16 Connecting a Power Source ...................
n 3 N Precautions....................................................................... 98 Handling the LCD Screen ........................................... 99 Using the Power Source ........................................... 100 Handling Your Computer........................................... 101 Handling the Built-in MOTION EYE Camera............. 104 Handling Discs .......................................................... 105 Using the Battery Pack..............................................
Before Use > n 4 N Before Use Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal computing experience. ! External views illustrated in this manual may look slightly different from those of your computer.
Before Use > Finding More about Your VAIO Computer n 5 N Finding More about Your VAIO Computer This section provides support information about your VAIO computer. 1. Printed Documentation ❑ Quick Start Guide — An overview of components connection, set-up information, etc. ❑ Troubleshooting and Recovery Guide ❑ Regulations, Guarantee, EULA and Service Support 2. On-screen Documentation ❑ User Guide (This manual) — Features of your computer and information about solving common problems.
Before Use > Finding More about Your VAIO Computer n 6 N 3. Support Web Sites If you have any problem with the computer, you can visit the VAIO-Link web site at http://www.vaio-link.com for troubleshooting. Before contacting VAIO-Link by telephone, try to solve the problem by reading the printed and non-printed documentation and visiting other Sony web sites. ❑ For more about VAIO and becoming part of the growing VAIO community, visit the web site at http://www.club-vaio.com.
Before Use > Ergonomic Considerations n 7 N Ergonomic Considerations You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations for both stationary and portable environments: ❑ Position of your computer – Place the computer directly in front of you (1).
Before Use > Ergonomic Considerations n 8 N ❑ Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display as well. ❑ Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect lighting to avoid bright spots on the display.
Getting Started > n 9 N Getting Started This section describes how to get started using your VAIO computer.
Getting Started > Locating Controls and Ports n 10 N Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages.
Getting Started > Locating Controls and Ports n 11 N A B C D E F G H I J K Built-in MOTION EYE camera (page 32) Built-in MOTION EYE camera indicator (page 16) Built-in microphone (monaural) WIRELESS switch (page 53) WIRELESS indicator (page 16) SD memory card slot (page 47) SD memory card indicator (page 16) Power indicator (page 16) Charge indicator (page 16) Disc drive indicator (page 16) Memory Stick indicator (page 16) L Memory Stick slot* (page 40) * Your computer supports both the standard-size M
Getting Started > Locating Controls and Ports n 12 N Back A DC IN port (page 17) B Network (Ethernet) port (page 52) C Modem port (page 50)
Getting Started > Locating Controls and Ports n 13 N Right A B C D E F Hi-Speed USB (USB 2.0) ports* (page 71) * Support high-/full-/low- speeds.
Getting Started > Locating Controls and Ports n 14 N Left A B C D Air vent Monitor port (page 62) Microphone jack (page 70) Headphones jack (page 61) E Hi-Speed USB (USB 2.0) ports* (page 71) F i.LINK 4-pin (S400) port (page 73) G ExpressCard/34 slot (page 45) * Support high-/full-/low- speeds.
Getting Started > Locating Controls and Ports n 15 N Bottom A Battery connector (page 18) B Air vents C Memory module compartment cover (page 94)
Getting Started > About the Indicator Lights n 16 N About the Indicator Lights Your computer is equipped with the following indicator lights: Indicator Functions Power 1 Illuminates in green when the computer is on, blinks slowly in orange while the computer is in Sleep mode, and turns off when the computer is off or in Hibernate mode. Charge Illuminates while the battery pack is charging. See Charging the Battery Pack (page 21) for more information.
Getting Started > Connecting a Power Source n 17 N Connecting a Power Source You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer. Using the AC Adapter ✍ Use only the supplied AC adapter for your computer. To use the AC adapter 1 Plug one end of the power cord (1) into the AC adapter (3). 2 Plug the other end of the power cord into an AC outlet (2). 3 Plug the cable connected to the AC adapter (3) into the DC IN port (4) on the computer.
Getting Started > Using the Battery Pack Using the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. Installing the Battery Pack To install the battery pack 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery LOCK switch (1) inward.
Getting Started > Using the Battery Pack 3 n 19 N Slide the battery pack diagonally into the battery compartment until the projections (2) on either side of the battery compartment fit into the U-shaped cuts (3) on either side of the battery pack.
Getting Started > Using the Battery Pack 4 Push the battery pack down into the compartment until it clicks into place. 5 Slide the battery LOCK switch outward to secure the battery pack on the computer. n 20 N ✍ When your computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet. ! Certain rechargeable batteries do not meet Sony quality and safety standards.
Getting Started > Using the Battery Pack n 21 N Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. To charge the battery pack 1 Install the battery pack. 2 Connect the computer to a power source with the AC adapter. The charge indicator light turns on while the battery pack is charging. When the battery pack charges close to the maximum charge level you selected with the battery charge functions, the charge indicator turns off.
Getting Started > Using the Battery Pack n 22 N ✍ Keep the battery pack in your computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer. If the battery charge level falls below 10%, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack. Your computer is supplied with a lithium ion battery pack and can be recharged any time.
Getting Started > Using the Battery Pack n 23 N Using the Battery Charge Functions You can customize the current battery charging method using the Battery Charge Functions. To make the life of battery longer, enable the battery care function. To enable the battery care function 1 Click Start, All Programs, and VAIO Control Center. 2 Click Power Management and then Battery Charge Functions. 3 Click Advanced. 4 Click to select the Enable Battery Care Function check box.
Getting Started > Using the Battery Pack n 24 N Removing the Battery Pack ! You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack while the computer is in Sleep mode. To remove the battery pack 1 Turn off the computer and close the LCD screen lid. 2 Slide the battery LOCK switch (1) inward.
Getting Started > Shutting Down Your Computer Safely n 25 N Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer 1 Turn off any peripherals connected to the computer. 2 Click Start, the arrow 3 Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off automatically. The power indicator light turns off.
Getting Started > Updating Your Computer n 26 N Updating Your Computer Be sure to install the latest updates on your computer with the following software applications so that the computer can run more efficiently. ❑ Windows Update Click Start, All Programs, and Windows Update and then follow the on-screen instructions. ❑ VAIO Update 4 Click Start, All Programs, VAIO Update 4, and VAIO Update Options and then follow the on-screen instructions.
Using Your VAIO Computer > n 27 N Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer.
Using Your VAIO Computer > Using the Keyboard n 28 N Using the Keyboard Your keyboard has additional keys that perform model-specific tasks. Combinations and Functions with the Fn Key ✍ Some keyboard functions can be used only after the operating system is finished launching. Combinations/Feature Functions Fn + % (F2): speaker switch Turns on and off the built-in speakers and the headphones. Fn + 2 (F3/F4): speaker volume Changes the volume level.
Using Your VAIO Computer > Using the Keyboard Combinations/Feature Fn + (F12): hibernate n 29 N Functions Provides the lowest level of power consumption. When you execute this command, the states of the system and the connected peripheral devices are saved to the built-in storage device and the system power is turned off. To return the system to its original state, use the power button to turn on the power. For details on power management, see Using the Power Saving Modes (page 82).
Using Your VAIO Computer > Using the Touch Pad n 30 N Using the Touch Pad You can point to, select, drag, and scroll objects on the screen using the touch pad. Action Description Point Slide your finger on the touch pad (1) to place the pointer (2) on an item or object. Click Press the left button (3) once. Double-click Press the left button twice. Right-click Press the right button (4) once. In many applications, this action displays a shortcut menu.
Using Your VAIO Computer > Using Special-function Buttons n 31 N Using Special-function Buttons Your computer is equipped with special buttons to help you use specific functions of the computer. Special-function button Functions Muting (S1) button Executes the task that is assigned to the button by default. You can change the default assignment with the VAIO Control Center. AV MODE button Launches the VAIO Launcher for selecting the desired software.
Using Your VAIO Computer > Using the Built-in MOTION EYE Camera n 32 N Using the Built-in MOTION EYE Camera Your computer is equipped with a built-in MOTION EYE camera. With the preinstalled image capture software, you can perform the following operations: ❑ Capturing still images and movies ❑ Sensing and capturing object movements for monitoring purposes ❑ Editing captured data ✍ Turning on the computer activates the built-in MOTION EYE camera.
Using Your VAIO Computer > Using the Optical Disc Drive n 33 N Using the Optical Disc Drive Your computer is equipped with an optical disc drive. Features and options in this section may not be available on your computer. See the specifications to find out about the configuration of your computer. To insert a disc 1 Turn on the computer. 2 Press the drive eject button (1) to open the drive. The drive tray slides out.
Using Your VAIO Computer > Using the Optical Disc Drive 4 n 34 N Close the drive tray by pushing it in gently. ! Do not remove the optical disc when your computer is in a power saving mode (Sleep or Hibernate). Be sure to bring the computer back into Normal mode before removing the disc.
Using Your VAIO Computer > Using the Optical Disc Drive n 35 N Supported Disc Media Your computer plays and records CDs, DVDs, and Blu-ray Disc™ media, depending on the model you purchased. See the reference chart below to find out which type of optical disc drive supports which types of media.
Using Your VAIO Computer > Using the Optical Disc Drive n 36 N ! This product is designed to play back discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Be aware that the audio side (non-DVD side) of a DualDisc may not play on this product because it does not conform to the CD Standard.
Using Your VAIO Computer > Using the Optical Disc Drive n 37 N Notes on Using the Optical Disc Drive Notes on writing data to a disc ❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive. ❑ Do not strike or shake your computer while the optical disc drive is writing data to a disc. ❑ Do not plug or unplug the AC adapter while the optical disc drive is writing data to a disc.
Using Your VAIO Computer > Using the Optical Disc Drive n 38 N Notes on region codes ❑ Region code indicators are labeled on the discs or packages to indicate in which region and on what type of player you can play the disc. Unless the region code indicates "2" (Europe belongs to region "2"), "5" (Russia belongs to region "5"), or "all" (this means that you can play this disc in most regions of the world), you cannot play the disc on your computer.
Using Your VAIO Computer > Using the Optical Disc Drive n 39 N Playing Discs To play a disc 1 Insert a disc into the optical disc drive. ! Connect the AC adapter to the computer and close all running software applications before playing a disc. 2 If nothing appears on the desktop, click Start, All Programs, and the desired software to play the disc. For instructions on how to use the software, see the help file included with the software.
Using Your VAIO Computer > Using the Memory Stick n 40 N Using the Memory Stick The Memory Stick is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable, it can be used for external data storage.
Using Your VAIO Computer > Using the Memory Stick n 41 N Inserting and Removing a Memory Stick To insert a Memory Stick 1 Locate the Memory Stick slot. 2 Hold the Memory Stick with the arrow facing upward and pointing toward the slot. 3 Carefully slide the Memory Stick into the slot until it clicks into place. ✍ The Memory Stick is automatically detected by your system and the contents on the Memory Stick are displayed.
Using Your VAIO Computer > Using the Memory Stick n 42 N ! Be sure to hold the Memory Stick with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the media, do not force the Memory Stick into the slot if you cannot insert it smoothly. Before using a Memory Stick Micro (M2), be sure to insert it into an M2 Standard-size adaptor or M2 Duo adaptor.
Using Your VAIO Computer > Using the Memory Stick n 43 N Formatting a Memory Stick To format a Memory Stick The Memory Stick has been formatted in the factory default setting and is ready for use. If you want to reformat the media with your computer, follow these steps. ! Be sure to use the device that is designed to format the media and supports the Memory Stick when formatting the media. Formatting the Memory Stick erases the entire data on the media.
Using Your VAIO Computer > Using the Memory Stick n 44 N Notes on Using the Memory Stick ❑ Your computer has been tested and found compatible with Sony branded Memory Stick with capacity of up to 16 GB that are available as of January 2009. However, not all the Memory Stick that meet the same specifications as the compatible media are guaranteed of compatibility. ❑ Inserting a Memory Stick with multiple conversion adaptors is not guaranteed of compatibility.
Using Your VAIO Computer > Using Other Modules / Memory Cards n 45 N Using Other Modules / Memory Cards Using the ExpressCard Module Your computer is equipped with an ExpressCard/34 slot* for transferring data among digital cameras, camcorders, music players, and other audio/video devices. This slot can only accommodate an ExpressCard/34 (34 mm wide) module*. * Referred to as the ExpressCard slot and the ExpressCard module in this manual. To insert an ExpressCard module 1 Locate the ExpressCard slot.
Using Your VAIO Computer > Using Other Modules / Memory Cards ✍ If the module does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction. Make sure you use the most recent driver software provided by the ExpressCard module manufacturer. To remove an ExpressCard module ✍ To remove an ExpressCard module when your computer is off, skip steps 1 to 4. 1 Double-click the Safely Remove Hardware icon on the taskbar. 2 Select the hardware you want to unplug.
Using Your VAIO Computer > Using Other Modules / Memory Cards n 47 N Using the SD Memory Card Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices.
Using Your VAIO Computer > Using Other Modules / Memory Cards To insert an SD memory card 1 Locate the SD memory card slot. 2 Hold the SD memory card with the arrow facing upward and pointing toward the slot. 3 Carefully slide the SD memory card into the slot until it clicks into place. Do not force the card into the slot. ✍ If the SD memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.
Using Your VAIO Computer > Using Other Modules / Memory Cards n 49 N Notes on Using Memory Cards General notes on using the memory card ❑ Be sure to use memory cards that are compliant with the standards supported by your computer. ❑ Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.
Using Your VAIO Computer > Using the Internet n 50 N Using the Internet Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for connecting your computer to the Internet.
Using Your VAIO Computer > Using the Internet n 51 N To connect a telephone cable ! The following procedure applies to models with a built-in modem only. 1 Plug one end of the phone cable (1) into the modem port 2 Plug the other end into the wall jack (2). on the computer. ! Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX).
Using Your VAIO Computer > Using the Network (LAN) n 52 N Using the Network (LAN) You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with an Ethernet network cable. Connect one end of a network cable (not supplied) to the network (Ethernet) port on the computer and the other end to your network. For detailed settings and devices needed to connect to the network, ask your network administrator. ✍ Your computer can be connected to the network with the default settings.
Using Your VAIO Computer > Using the Wireless LAN n 53 N Using the Wireless LAN Using the Wireless LAN (WLAN), all your digital devices with the built-in WLAN function communicate freely with each other through a network. A WLAN is a network in which a user can connect to a Local Area Network (LAN) through a wireless (radio) connection. The WLAN supports all normal Ethernet connectivity, but with the added benefits of mobility and roaming.
Using Your VAIO Computer > Using the Wireless LAN n 54 N The IEEE 802.11b/g standard is a wireless LAN standard, using the 2.4 GHz band. The IEEE 802.11g standard provides higher-speed communications than the IEEE 802.11b standard. The IEEE 802.11a standard is a wireless LAN standard, using the 5 GHz band. The IEEE 802.11n draft standard is a wireless LAN standard, using the 2.4 GHz or 5 GHz band. Wireless LAN devices using the 2.
Using Your VAIO Computer > Using the Wireless LAN n 55 N Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a LAN is created only by wireless devices themselves, with no other central controller or access point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home.
Using Your VAIO Computer > Using the Wireless LAN n 56 N To communicate without an access point (ad-hoc) ! The IEEE 802.11a standard, using the 5 GHz band, and the IEEE 802.11n draft standard, using the 2.4 GHz or 5 GHz band, are not available on ad-hoc networks. 1 Turn on the WIRELESS switch. 2 Click the button next to or above your desired wireless option(s) in the VAIO Smart Network window. Make sure the WIRELESS indicator light turns on. 3 Click Start and Control Panel.
Using Your VAIO Computer > Using the Wireless LAN n 57 N Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access point (not supplied). The access point bridges the wireless and wired LAN and acts as a central controller for the wireless LAN network. The access point coordinates transmission and reception from multiple wireless devices within a specific range.
Using Your VAIO Computer > Using the Wireless LAN n 58 N To connect to a wireless network 1 Make sure an access point is set up. See the manual that came with your access point for more information. 2 Turn on the WIRELESS switch. 3 Click the button next to or above your desired wireless option(s) in the VAIO Smart Network window. Make sure the WIRELESS indicator light turns on. ! Wireless LAN communication (IEEE 802.
Using Your VAIO Computer > Using the Wireless LAN Stopping Wireless LAN Communications To stop wireless LAN communications Click the button next to or above the WLAN icon in the VAIO Smart Network window. ! Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.
Using Peripheral Devices > n 60 N Using Peripheral Devices You can add functionality to your VAIO computer by using the various ports on the computer. ❑ Connecting External Speakers or Headphones (page 61) ❑ Connecting an External Display (page 62) ❑ Selecting Display Modes (page 65) ❑ Using the Multiple Monitors Function (page 67) ❑ Connecting an External Microphone (page 70) ❑ Connecting a USB Device (page 71) ❑ Connecting an i.
Using Peripheral Devices > Connecting External Speakers or Headphones Connecting External Speakers or Headphones You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer. To connect external speakers ✍ Make sure your speakers are designed for computer use. ! Turn down the volume of the speakers before you turn them on. Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied).
Using Peripheral Devices > Connecting an External Display n 62 N Connecting an External Display You can connect an external display (not supplied) to your computer. For example, you can use the computer with a computer display or a projector. Features and options in this section may not be available on your computer. ✍ Connect the power cord of your external display after connecting all other cables. Connecting a Computer Display You can connect a computer display (monitor) to your computer.
Using Peripheral Devices > Connecting an External Display Connecting a Multimedia Computer Display You can connect a multimedia computer display that includes built-in speakers and a microphone to your computer. To connect a multimedia computer display 1 Plug the power cord of your multimedia computer display (1) into an AC outlet. 2 Plug the display cable (2) into the monitor port (3) a on the computer. 3 Plug the speaker cable (4) into the headphones jack (5) i on the computer.
Using Peripheral Devices > Connecting an External Display Connecting a Projector You can connect a projector (for example, the Sony LCD projector) to your computer. To connect a projector 1 Connect the power cord (1) of your projector into an AC outlet. 2 Plug a display cable (2) into the monitor port (3) a on the computer. 3 Plug an audio cable (4) into the headphones jack (5) i on the computer. 4 Plug the display cable and the audio cable into the port and jack on the projector (6).
Using Peripheral Devices > Selecting Display Modes n 65 N Selecting Display Modes When an external display is connected, you can select either your computer screen or the connected display to use as the primary monitor. If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors Function (page 67) for more information. The procedure for selecting a display depends on the video controller used in the computer.
Using Peripheral Devices > Selecting Display Modes n 66 N To select a display ✍ You may not be able to display the same contents on your computer screen and the external display or projector at the same time, depending on the type of your external display or projector. Turn on the external display before turning on your computer. ❑ On models with the Intel Graphics Media Accelerator 1 Right-click on the desktop and select Personalize. 2 Click Display Settings.
Using Peripheral Devices > Using the Multiple Monitors Function n 67 N Using the Multiple Monitors Function The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display connected to the monitor port, your computer screen and the external display can function as a single desktop. The procedure for using the Multiple Monitors function depends on the video controller used in the computer.
Using Peripheral Devices > Using the Multiple Monitors Function n 68 N To use the Multiple Monitors function ✍ Your external display may not support the Multiple Monitors function. Certain software applications may not be compatible with Multiple Monitors settings. Make sure that your computer does not enter Sleep or Hibernate mode while you are using the Multiple Monitors function. Otherwise, the computer may not return to Normal mode.
Using Peripheral Devices > Using the Multiple Monitors Function ✍ n 69 N You can also change the muting (S1) button assignment to activate the Multiple Monitors function with the muting (S1) button. To change the muting (S1) button assignment, press and hold the muting (S1) button to display the window for changing the assignment. For details on the muting (S1) button, see Using Special-function Buttons (page 31).
Using Peripheral Devices > Connecting an External Microphone n 70 N Connecting an External Microphone If you use a sound input device (for example, to chat over the Internet), you need to plug in an external microphone (not supplied). To connect an external microphone Plug the microphone cable (1) into the microphone jack (2) m. ✍ Make sure your microphone is designed for computer use.
Using Peripheral Devices > Connecting a USB Device n 71 N Connecting a USB Device You can purchase a Universal Serial Bus (USB) device, such as a mouse, floppy disk drive, speaker, and printer, and connect it to your computer. To connect a USB device 1 Choose the USB port (1) you prefer to use. 2 Plug the USB device cable (2) into the USB port.
Using Peripheral Devices > Connecting a USB Device n 72 N Notes on connecting a USB device ❑ You may need to install the driver software supplied with your USB device before use. See the manual that came with the USB device for more information. ❑ Be sure to use a USB printer compatible with your version of Windows to print documents. ❑ For information on how to remove a USB device, see the manual that came with the device.
Using Peripheral Devices > Connecting an i.LINK Device n 73 N Connecting an i.LINK Device Your computer is equipped with an i.LINK port which you can use to connect an i.LINK device, such as a digital video camcorder. ✍ i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK connection may vary, depending on a software application, an operating system, and a compatible i.LINK device.
Using Peripheral Devices > Connecting an i.LINK Device n 74 N Connecting a Digital Video Camcorder To connect a digital video camcorder Plug one end of an i.LINK cable (1) (not supplied) into the i.LINK port (2) on the computer and the other end into the DV In/ Out port (3) on the digital video camcorder. ✍ The connection procedure varies depending on your compatible i.LINK device. See the manual that came with the device for more information.
Customizing Your VAIO Computer > n 75 N Customizing Your VAIO Computer This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities.
Customizing Your VAIO Computer > Setting the Password n 76 N Setting the Password Use one of the BIOS functions to set the password. Once you have set the password, you will be prompted to enter the password after the VAIO logo appears to start your computer. The power-on password allows you to protect your computer from unauthorized access. Adding the Power-on Password The power-on password is provided to protect your computer from unauthorized access.
Customizing Your VAIO Computer > Setting the Password n 77 N To add the power-on password (machine password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 78 N To add the power-on password (user password) ! Make sure you set the machine password before setting the user password. 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the machine password and press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 79 N Changing/Removing the Power-on Password To change or remove the power-on password (machine password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the machine password and press the Enter key.
Customizing Your VAIO Computer > Setting the Password n 80 N To change or remove the power-on password (user password) 1 Turn on the computer. 2 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo appears. 3 Enter the user password and press the Enter key. 4 Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the Enter key.
Customizing Your VAIO Computer > Using the VAIO Control Center n 81 N Using the VAIO Control Center The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior. To use the VAIO Control Center 1 Click Start, All Programs, and VAIO Control Center. 2 Select the desired control item and change the settings. 3 Once finished, click OK. The setting of the desired item has been changed.
Customizing Your VAIO Computer > Using the Power Saving Modes n 82 N Using the Power Saving Modes You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode, your computer has two distinct power saving modes: Sleep and Hibernate. When using battery power, you should be aware that the computer will automatically enter Hibernate mode if the remaining battery life becomes short, regardless of the power management setting you select.
Customizing Your VAIO Computer > Using the Power Saving Modes n 83 N Using Sleep Mode Sleep mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power consumption mode. The orange power indicator light blinks slowly in this mode. ! If you do not intend to use your computer for a long period of time while it is disconnected from AC power, place the computer into Hibernate mode or turn it off.
Customizing Your VAIO Computer > Using the Power Saving Modes n 84 N If the computer is not used for a certain period of time, it will enter Sleep mode. To modify this, you can change the Sleep mode settings. To change the Sleep mode settings 1 Right-click the power status icon on the taskbar and select Power Options. 2 Click Change plan settings under the current power plan. 3 Change the time to place the computer into Sleep mode and click Save Changes.
Customizing Your VAIO Computer > Using the Power Saving Modes n 85 N Using Hibernate Mode In Hibernate mode, the state of the system is saved on the built-in storage device(s) and power is turned off. Even when the battery runs out of power, no data will be lost. The power indicator light is unlit in this mode. ✍ If you do not intend to use your computer for a long period of time, place the computer into Hibernate mode. To activate Hibernate mode Press the Fn+F12 keys.
Customizing Your VAIO Computer > Using the Power Saving Modes To return to Normal mode Press the power button. The computer returns to its normal state. ! If you press and hold the power button for more than four seconds, your computer will turn off automatically. ✍ It takes more time to return to Normal mode from Hibernate mode than from Sleep mode.
Customizing Your VAIO Computer > Using the VAIO Power Management n 87 N Using the VAIO Power Management Power management helps you set up power plans for running on AC or battery power to suit your requirements for power consumption. The VAIO Power Management is a software application developed exclusively for VAIO computers. With this software application, you can enhance the Windows power management functions to ensure better operation of your computer and longer battery life.
Customizing Your VAIO Computer > Using the VAIO Power Management VAIO Power Management Viewer You can view performance with the power plan that was modified with the VAIO Power Management. To start the VAIO Power Management Viewer 1 Click Start, All Programs, and VAIO Control Center. 2 Click Power Management and VAIO Power Management Viewer.
Customizing Your VAIO Computer > Configuring Your Modem n 89 N Configuring Your Modem Before you can start using your internal modem (not all modems are built-in), or each time you use your modem while traveling, make sure that the country of the active location defined in the Phone and Modem Options window matches the country you are dialing from. To change the country settings for your modem 1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Phone and Modem Options.
Customizing Your VAIO Computer > Configuring Your Modem 9 Check that your modem is listed on the Modems tab. If your modem is not listed, click Add and follow the wizard. 10 Click Apply/OK. Your modem is configured. ! Before applying new country settings, make sure your phone cable is disconnected from your computer.
Upgrading Your VAIO Computer > n 91 N Upgrading Your VAIO Computer Your VAIO computer and memory modules use high precision components and electronic connectors technology. To avoid invalidation of the warranty during your product warranty period, we recommend that: ❑ You should contact your dealer to install a new memory module. ❑ You should not install it yourself, if you are not familiar with upgrading memory on a computer.
Upgrading Your VAIO Computer > Adding and Removing Memory n 92 N Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the amount of memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages. Notes on adding/removing memory modules ❑ Be sure to place your computer on a flat surface before adding or removing memory modules. ❑ Be careful when changing memory.
Upgrading Your VAIO Computer > Adding and Removing Memory n 93 N ❑ Do not open the memory module package before you are ready to change the module. The package protects the module from ESD. ❑ Use the special bag supplied with the memory module or wrap the module in aluminum foil to protect it from ESD.
Upgrading Your VAIO Computer > Adding and Removing Memory n 94 N Removing and Installing a Memory Module To change or add a memory module 1 Shut down the computer and disconnect all peripheral devices. 2 Unplug the computer and remove the battery pack. 3 Wait about an hour until the computer cools down. 4 Unscrew the screw (indicated by the arrow below) on the bottom of the computer and remove the memory module compartment cover. 5 Touch a metal object to discharge static electricity.
Upgrading Your VAIO Computer > Adding and Removing Memory 6 Remove the currently installed memory module as follows: ❑ Pull the latches in the direction of the arrows (1). The memory module is released. ❑ Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2). 7 Remove the new memory module from its packaging.
Upgrading Your VAIO Computer > Adding and Removing Memory 8 n 96 N Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any other components on the motherboard. If you want to install only one memory module, be sure to use the slot closer to the back of your computer. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot.
Upgrading Your VAIO Computer > Adding and Removing Memory n 97 N Viewing the Amount of Memory To view the amount of memory 1 Turn on the computer. 2 Click Start, All Programs, and VAIO Control Center. 3 Click System Information and System Information. You can view the amount of system memory in the right pane. If the additional memory does not appear, repeat the installation procedure and restart the computer.
Precautions > n 98 N Precautions This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage.
Precautions > Handling the LCD Screen n 99 N Handling the LCD Screen ❑ Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be careful when using your computer near a window. ❑ Do not scratch the surface of the LCD screen or exert pressure on it. This could cause a malfunction. ❑ Using your computer in low temperature conditions may produce a residual image on the LCD screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal.
Precautions > Using the Power Source n 100 N Using the Power Source See the specifications to find out about the configuration of your computer. ❑ Do not share the AC outlet with other power-consuming equipment, such as a photocopier or a shredder. ❑ You can purchase a power strip with a surge protector. This device helps prevent damage to your computer caused by sudden power surges, in an electrical storm, for example. ❑ Do not place heavy objects on the power cord.
Precautions > Handling Your Computer n 101 N Handling Your Computer ❑ Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer. ❑ If you drop a solid object or any liquid onto your computer, shut down the computer, unplug it, and remove the battery pack.
Precautions > Handling Your Computer n 102 N ❑ Provide adequate air circulation to prevent internal overheating. Do not place your computer on porous surfaces such as rugs, blankets, couches, or beds, or near draperies that may block its air vents. ❑ Your computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs, relocate the computer a suitable distance away from the set. ❑ Use only specified peripheral equipment and interface cables.
Precautions > Handling Your Computer n 103 N ❑ Do not exert pressure on the LCD screen or its edges when opening the LCD screen lid or lifting your computer. The LCD screen may be sensitive to pressure or added stress, and exerting pressure may damage the screen or cause it to malfunction. To open the computer, hold the base with one hand and gently lift the LCD screen lid with the other. To carry the computer with the lid open, be sure to hold the computer with both hands.
Precautions > Handling the Built-in MOTION EYE Camera n 104 N Handling the Built-in MOTION EYE Camera ❑ Do not touch the lens protection cover of the built-in MOTION EYE camera, as it may cause scratches on the cover and such scratches will appear on the captured images. ❑ Do not let the direct sunlight get into the lens of the built-in MOTION EYE camera regardless of your computer's power state, as it may cause the camera to malfunction.
Precautions > Handling Discs n 105 N Handling Discs ❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: ❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc.
Precautions > Using the Battery Pack n 106 N Using the Battery Pack ❑ Do not leave battery packs in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight. ❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures. ❑ Charge battery packs at temperatures between 10°C to 30°C. Lower temperatures require longer charging time. ❑ Certain rechargeable battery packs do not meet Sony quality and safety standards.
Precautions > Using Headphones n 107 N Using Headphones ❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings. ❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play.
Precautions > Handling the Memory Stick n 108 N Handling the Memory Stick ❑ Do not touch the Memory Stick connector with your finger or metallic objects. ❑ Use only the adhesive label supplied with the Memory Stick as a label. ❑ Do not bend, drop, or expose the Memory Stick. ❑ Do not disassemble or modify the Memory Stick. ❑ Do not let the Memory Stick get wet.
Precautions > Handling the Built-in Storage Device n 109 N Handling the Built-in Storage Device The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be restored. To prevent losing data, you should be careful when handling your computer. Features and options in this section may not be available on your computer.
Troubleshooting > n 110 N Troubleshooting This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before contacting VAIO-Link. Features and options in this section may not be available on your computer.
Troubleshooting > n 111 N ❑ Memory Stick (page 147) ❑ Peripherals (page 148)
Troubleshooting > Computer n 112 N Computer What should I do if my computer does not start? ❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit. ❑ Make sure the battery pack is installed properly and charged. ❑ Disconnect all connected USB devices (if any), and then restart your computer. ❑ Remove any extra memory modules you may have installed since purchase, and then restart your computer.
Troubleshooting > Computer n 113 N What should I do if the green power indicator light turns on but my screen remains blank? ❑ Press the Alt+F4 keys several times to close the application window. An application error may have occurred. ❑ Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart. ❑ Press and hold the power button for more than four seconds to shut down your computer. Unplug the AC adapter and leave the computer for about five minutes.
Troubleshooting > Computer n 114 N Why doesn't my computer enter Sleep or Hibernate mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or Hibernate mode. To restore your computer to Normal mode 1 Close all open programs. 2 Click Start, the arrow next to the Lock button, and Restart. 3 If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart.
Troubleshooting > Computer n 115 N What should I do if a message appears notifying of either incompatibility or the improper installation of the battery pack and my computer then enters Hibernate mode? ❑ This problem could be due to the battery pack not being installed properly. To resolve this problem, turn off your computer and remove the battery pack. Then reinstall the battery pack to the computer again. For details, see Installing the Battery Pack (page 18).
Troubleshooting > Computer n 116 N What should I do if my game software does not work or it keeps crashing? ❑ Check the web site of the game if there are any patches or updates to download. ❑ Make sure you have installed the latest video driver software. ❑ On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in this case is not guaranteed.
Troubleshooting > Computer n 117 N Why doesn't my screen turn off after the automatic turn-off time has passed? The VAIO original screen saver disables the timer setting, which you can select using the Windows power options, for your screen to turn off. Select a screen saver other than the VAIO original screen saver.
Troubleshooting > System Security n 118 N System Security How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly. You can get important Windows updates by doing the following: ! Your computer must be connected to the Internet to download the updates.
Troubleshooting > Battery n 119 N Battery How do I find the battery charging status? You can check the charge indicator for the battery charging status. See Charging the Battery Pack (page 21) for more information. When is my computer using AC power? When your computer is directly connected to the AC adapter, it uses AC power, even if the battery pack is installed. When should I recharge the battery pack? ❑ When the battery charge level falls below 10%.
Troubleshooting > Battery n 120 N Should I be concerned that the installed battery pack is warm? No, it is normal for the battery pack to be warm when it is powering your computer. Can my computer enter Hibernate mode while using battery power? Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode.
Troubleshooting > Built-in MOTION EYE Camera n 121 N Built-in MOTION EYE Camera Why does the viewfinder show no images or poor-quality images? ❑ The built-in MOTION EYE camera cannot be shared by more than one software application. Exit the current application before launching another. ❑ The viewfinder may show some noise, for example horizontal streaks, if you view a rapid-moving object. This is normal and does not indicate a malfunction. ❑ If the problem persists, restart your computer.
Troubleshooting > Built-in MOTION EYE Camera n 122 N What should I do if movie playback shows dropped frames when my computer is running on the battery? The battery pack is running out of power. Connect your computer to an AC power source. What should I do if captured images flicker? This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output frequency and shutter speed.
Troubleshooting > Internet n 123 N Internet What should I do if my modem does not work? ❑ Make sure the telephone cable is securely plugged into the modem port on your computer and the wall jack. ❑ Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone. ❑ Make sure that the telephone number the program is dialing is correct. ❑ Make sure the software you are using is compatible with your computer's modem.
Troubleshooting > Internet n 124 N Why is my modem connection slow? Your computer is equipped with a V.92/V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, do any of the following: ❑ Ask your telephone company to verify your telephone line is free of any line noise.
Troubleshooting > Networking n 125 N Networking What should I do if my computer cannot connect to a wireless LAN access point? ❑ Connection capability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. ❑ Make sure power to the access point is on.
Troubleshooting > Networking n 126 N ❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. To change the settings, follow these steps: 1 Right-click the power status icon on the taskbar and select Power Options. 2 Click Change plan settings under the current power plan. 3 Click Change advanced power settings. 4 Select the Advanced settings tab.
Troubleshooting > Networking n 127 N What should I do if I cannot access the Internet? ❑ Check the access point settings. See the manual that came with your access point for more information. ❑ Make sure your computer and the access point are connected to one another. ❑ Move your computer away from obstacles or closer to any access point you may be using. ❑ Make sure your computer is properly configured for Internet access.
Troubleshooting > Networking n 128 N How do I avoid data transfer interruptions? ❑ When your computer is connected to an access point, data transfer interruptions may occur if a large file is exchanged or the computer is placed in close proximity to microwaves and cordless telephones. ❑ Move your computer closer to the access point. ❑ Make sure the access point connection is intact. ❑ Change the access point channel. See the manual that came with your access point for more information.
Troubleshooting > Networking How do I display the VAIO Smart Network window? To display the VAIO Smart Network window on the desktop, follow these steps: 1 Click Start, All Programs, and VAIO Control Center. 2 Click Network Connections and VAIO Smart Network. 3 Click Advanced in the right pane. ✍ For information on the VAIO Smart Network software, see the help file included with the software.
Troubleshooting > Optical Discs n 130 N Optical Discs Why does my computer freeze when I try to read a disc? The disc that your computer is trying to read may be dirty or damaged. Follow these steps: 1 Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer. 2 Remove the disc from the optical disc drive. 3 Check the disc for dirt or damage. If you need to clean the disc, see Handling Discs (page 105) for instructions.
Troubleshooting > Optical Discs n 131 N What should I do if I cannot play a disc properly on my computer? ❑ Make sure the disc is inserted into the optical disc drive with the label facing upward. ❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions. ❑ If a disc is dirty or damaged, your computer will stop responding. Follow these steps: 1 Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
Troubleshooting > Optical Discs n 132 N 4 Click Device Manager in the left pane. The Device Manager window appears with a listing of your computer's hardware devices. If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the driver software. 5 Double-click the optical disc drive device to open a list of the optical disc drives of your computer. 6 Double-click the desired drive.
Troubleshooting > Optical Discs n 133 N What should I do if I cannot write data to CD media? ❑ Make sure you neither launch any software application nor allow any to launch automatically, not even a screen saver. ❑ If you are using a CD-R/RW disc with an adhesive label affixed, replace it with one with no affixed adhesive label. Using a disc with an affixed adhesive label could cause a write error or other damage.
Troubleshooting > Display n 134 N Display Why did my screen go blank? ❑ Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If the computer is in LCD (Video) Sleep mode, press any key to bring the computer back into Normal mode. See Using the Power Saving Modes (page 82) for more information. ❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.
Troubleshooting > Display n 135 N Why doesn't my screen display a video? ❑ If the display output is directed to the external display and the external display is disconnected, you cannot display a video on your computer screen. Stop video playback, change the display output to the computer screen, and then restart video playback. See Selecting Display Modes (page 65) for changing the display output. Alternatively, you can press the Fn+F7 keys to change the display output.
Troubleshooting > Display n 136 N What should I do if the LCD brightness of my screen changes? ❑ The LCD brightness setting, adjusted with the Fn+F5/F6 keys, is temporary and may be restored to the original setting when your computer returns to Normal mode from Sleep or Hibernate mode. To save your preference for the brightness, follow these steps: 1 Right-click the power status icon on the taskbar and select Power Options. 2 Click Change plan settings under the current power plan.
Troubleshooting > Display ❑ On models with an ATI video controller, you may find your computer screen temporarily goes blank: ❑ When you connect or disconnect the AC adapter ❑ Immediately after you start the computer with battery power To save your preference for the brightness, follow these steps: 1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Change when the computer sleeps under Power Options. 4 Click Change advanced power settings.
Troubleshooting > Display n 138 N What should I do if the external display remains blank? If you cannot change the display output with the Fn+F7 keys, you need to change the settings for the external display with the VAIO Control Center. To change the settings, launch the VAIO Control Center, select the control item for the external display, and then click to select the check box for changing the options to detect the external display. Then, use the Fn+F7 keys to change the display output.
Troubleshooting > Printing n 139 N Printing What should I do if I cannot print a document? ❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer. ❑ Make sure your printer is compatible with the Windows operating system installed on your computer. ❑ You may need to install the printer driver software before you use your printer. See the manual that came with your printer for more information.
Troubleshooting > Microphone n 140 N Microphone What should I do if my microphone does not work? ❑ If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the microphone jack on your computer. ❑ Your sound input device may have been incorrectly configured. To configure the sound input device, follow these steps: 1 Close all open programs. 2 Click Start and Control Panel. 3 Click Hardware and Sound. 4 Click Manage audio devices under Sound.
Troubleshooting > Speakers n 141 N Speakers What should I do if I do not hear sound from the built-in speakers? ❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. ❑ The volume may have been turned off by the Fn+F2 keys or the muting (S1) button. Press the keys or the button once again. ❑ The volume may have been minimized by the Fn+F3 keys.
Troubleshooting > Touch Pad n 142 N Touch Pad What should I do if the touch pad does not work? ❑ You may have disabled the touch pad before connecting a mouse to your computer. See Using the Touch Pad (page 30). ❑ Make sure that a mouse is not connected to your computer. ❑ If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window.
Troubleshooting > Keyboard n 143 N Keyboard What should I do if the keyboard configuration is wrong? The language layout of your computer's keyboard is labeled on the packaging box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. To change the keyboard configuration, follow these steps: 1 Click Start and Control Panel. 2 Click Clock, Language, and Region, and click Regional and Language Options.
Troubleshooting > Floppy Disks n 144 N Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: 1 Close all programs that are accessing the floppy disk drive.
Troubleshooting > Audio/Video n 145 N Audio/Video What should I do if I cannot use my digital video camcorder? If a message appears stating that the i.LINK device is disconnected or turned off, the i.LINK cable may not be securely plugged into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See Connecting an i.LINK Device (page 73) for more information.
Troubleshooting > Audio/Video n 146 N What should I do if I do not hear the sound from the sound output device connected to the HDMI output port, optical output port, or headphones jack? You need to change the sound output device if you want to hear sound from the device connected to a port, such as the HDMI output port, optical output port, or headphones jack. For the detailed procedure, see How do I change the sound output device? (page 145).
Troubleshooting > Memory Stick n 147 N Memory Stick What should I do if I cannot use a Memory Stick that was formatted on a VAIO computer on other devices? You may need to reformat your Memory Stick. Formatting a Memory Stick erases all data, including music data previously saved on it. Before you reformat a Memory Stick, back up important data and confirm that the Memory Stick does not contain files you want to keep.
Troubleshooting > Peripherals n 148 N Peripherals What should I do if I cannot connect a USB device? ❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to the AC outlet. ❑ Try using another USB port on your computer.
Trademarks > n 149 N Trademarks Sony, VAIO, the VAIO logo, VAIO Control Center, VAIO Power Management, VAIO Power Management Viewer, VAIO Update, and "BRAVIA" are trademarks or registered trademarks of Sony Corporation. and "Memory Stick," "Memory Stick Duo," "MagicGate," "OpenMG," "MagicGate Memory Stick," "Memory Stick PRO," "Memory Stick PRO-HG," "Memory Stick Micro," "M2," and the Memory Stick logo are trademarks or registered trademarks of Sony Corporation.
Trademarks > n 150 N The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. SD Logo is a trademark. SDHC Logo is a trademark. CompactFlash® is a trademark of SanDisk Corporation. MultiMediaCard™ is a trademark of MultiMediaCard Association. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Notice > n 151 N Notice © 2009 Sony Corporation. All rights reserved. This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.
n © 2009 Sony Corporation
