N User Guide Personal Computer VG C - V s e r i e s
n N 2 Contents Before Use ...............................................................................................................................................................................5 Documentation ...................................................................................................................................................................5 Ergonomic Considerations ........................................................................................................
n N 3 Using Peripheral Devices.......................................................................................................................................................75 Connecting External Speakers.........................................................................................................................................76 Using the Remote Commander.....................................................................................................................................
n N 4 Troubleshooting ...................................................................................................................................................................117 Computer .......................................................................................................................................................................118 System Security ..............................................................................................................................
n N 5 Before Use Before Use Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal computing. Documentation Your Documentation contains printed information and user guides to read on your computer. Printed Documentation ❑ Welcome mat — Contains overview of connections, setting up information, etc.
n N 6 Before Use ❑ VAIO Recovery Options Guide — Provides information about restoring individual software programs, software drivers, and drive partition(s) or your entire hard disk drive to the original factory installed settings. To access this online software information: 1 Click Start, point to All Programs, and click VAIO Control Center. 2 Click the Categories tab and then the Documentation folder. 3 Click Recovery Guide.
n N 7 Before Use Ergonomic Considerations Whenever possible, you should attempt to take account of the following ergonomic considerations: ❑ Position of your computer – Place the display directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, pointing device, or external mouse. Let your upper arms hang naturally at your sides. Have breaks during sessions with your computer.
n N 8 Before Use ❑ Viewing angle of the display – Use the display's tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well. ❑ Lighting – Choose a location where windows and lights do not create glare and reflection on the display. Use indirect lighting to avoid bright spots on the display.
n N 9 Getting Started Getting Started This section describes how to get started with using your VAIO computer.
n N 10 Getting Started Locating Controls and Ports Take a moment to identify the controls and ports shown on the following pages.
n N 11 Getting Started Back A Back panel cover (removable) (page 100) B Back panel cover release tab (page 101) C Cable guides
n N 12 Getting Started Right A PC Card slot (page 56) B Power button C D E F G H I Memory Stick media slot*1 (page 60) Optical disc drive (page 39) Manual eject hole (page 130) Drive eject button (page 39) Optical disc drive indicator (page 14) Headphones jack (page 76) Microphone jack (page 80) J i.LINK® (IEEE1394) S400 port (page 85) K L M N O P Hi-Speed USB (USB 2.0) ports*2 (page 81) *1 Your computer supports Memory Stick Duo media and Memory Stick Pro high speed and high capacity capabilities.
n N 13 Getting Started Bottom Slide the back panel cover up to access these ports and jacks. A Audio In jack (page 47) B S Video In jack (page 47) C VHF/UHF port (page 47) D i.LINK® (IEEE 1394) S400 port (page 85) E F G H Hi-Speed USB (USB 2.0) ports* (page 81) Network (Ethernet) port (100BASE-TX / 10BASE-T) (page 87) Modem port (page 67) S/PDIF Optical Out port for connecting digital equipment such as an AV amplifier. I Line In jack for connecting audio equipment. * Supports high-/full-/low- speeds.
n N 14 Getting Started About the Indicator Lights Indicator Functions Power 1 Illuminates in green when the power of the computer is on, illuminates in orange when the computer is in Standby mode, and turns off when the computer is in Hibernate mode or off. Memory Stick Illuminates when data is read from or written to the Memory Stick media. (Do not enter Standby mode or turn off the computer when this indicator is on.) When the indicator is off, the Memory Stick media is not being used.
n N 15 Getting Started Connecting the Power Cord The computer's power cord must be plugged into an AC power source, such as an AC wall outlet, surge protector, or Uninterruptible Power Supply (UPS), before you can establish communication with your wireless keyboard and wireless mouse. To connect the power cord 1 Insert the power cord into the AC In port (1) on the back panel of the computer. 2 Pass the power cord cable over the power cord hook (2), located next to the AC In port.
n N 16 Getting Started ! Use your computer only with the supplied power cord. To disconnect your computer completely from AC power, unplug the power cord. Make sure that the AC outlet is easily accessible. ✍ If you are interrupted and need to leave your computer suddenly, put your computer into Hibernate mode. See Using Hibernate Mode (page 96). This power saving mode saves you the time of shutting down in the normal way.
n N 17 Getting Started Shutting Down Your Computer Safely To avoid losing unsaved data, be sure to shut down your computer properly, as described below. To shut down your computer 1 Turn off any peripherals connected to your computer. 2 Click Start and then Turn Off Computer. The Turn off computer window appears. 3 Click Turn Off. 4 Respond to any prompts warning you to save documents or to consider other users and wait for your computer to turn off automatically.
n N 18 Using Your VAIO Computer Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer.
n N 19 Using Your VAIO Computer Using the Keyboard Your computer comes with a wireless keyboard. You can place the keyboard anywhere you find comfortable within a range of approximately 32 feet (10 m) for VGC-V620G or 2.5 feet (80 cm) for VGC-V617G/V600MG from the main unit. For more information on the standard keys, see Windows Help and Support Center and click on the Customizing your computer link.
n N 20 Using Your VAIO Computer VGC-V620G A Function keys B C D E F G H ✍ The above illustration shows the keyboard delivered with the models that are available in USA and Canada. The keyboard for the models available in Latin American countries and areas appears different from the above. I The 12 function keys along the top of the keyboard are used to perform certain tasks. The task associated with each function key varies among software programs.
n N 21 Using Your VAIO Computer A Keyboard feet Extend to adjust the keyboard height. B CONNECT button Press to enable the keyboard to communicate with the main unit. C Battery compartment Storage compartment for the AA batteries.
n N 22 Using Your VAIO Computer VGC-V617G/V600MG A Function keys The 12 function keys along the top of the keyboard are used to perform certain tasks. The task associated with each function key varies among software programs. B Special-function buttons See Using Special-function Buttons (page 38). C Numeric keypad Use the numeric keypad to type numbers or to perform basic math calculations. Press the Num Lock key to enable the numeric keypad function.
n N 23 Using Your VAIO Computer A Keyboard feet Extend to adjust the keyboard height. B Battery compartment Storage compartment for the AA batteries. C CONNECT button Press to enable the keyboard to communicate with the main unit.
n N 24 Using Your VAIO Computer Before You Use the Keyboard Before attempting to use the wireless keyboard, you must enable communications between the computer and the keyboard. Two or four AA batteries, depending on the model you purchased, are supplied with your computer for use in the wireless keyboard. ! To maintain good communication, operate your wireless keyboard within the distance limitations of keyboard: approximately 32 feet (10 m) for VGC-V620G or 2.
n N 25 Using Your VAIO Computer To connect the wireless keyboard VGC-V620G 1 Insert four AA batteries (1) into the wireless keyboard. 2 Turn on the computer. 3 Slide the power switch (2) on the right-hand side of the keyboard to turn on the keyboard. 4 Press the CONNECT button (3) on the right panel of the computer. 5 Press the CONNECT button (4) on the bottom of the keyboard. Communication between the wireless keyboard and the computer is now active.
n N 26 Using Your VAIO Computer
n N 27 Using Your VAIO Computer VGC-V617G/V600MG 1 Insert two AA batteries (1) into the wireless keyboard. 2 Turn on the computer. 3 Press the CONNECT button (2) on the right panel of the computer. 4 Press the CONNECT button (3) on the bottom of the keyboard. Communication between the wireless keyboard and the computer is now active. ✍ Steps 3 and 4 must be completed within 10 seconds of each other.
n N 28 Using Your VAIO Computer
n N 29 Using Your VAIO Computer ✍ If your wireless keyboard does not operate properly, the batteries may need to be replaced. If your wireless keyboard is not being used for extended periods of time, remove the batteries to avoid possible damage from battery leakage. If you want to put the keyboard in a more 'ergonomical' position, open the keyboard feet.
n N 30 Using Your VAIO Computer Combinations and Functions with the Fn Key (VGC-V620G only) Combinations/Feature Functions Fn + % (F2): speaker switch Turns on and off the built-in speakers and the headphones. Fn + 2 (F3/F4): speaker volume Adjusts the built-in speaker volume. To increase volume, press Fn+F4 and then M or ,, or keep pressing Fn+F4. To decrease volume, press Fn+F3 and then m or <, or keep pressing Fn+F3. Fn + 8 (F5/F6): brightness control Adjusts the brightness of the LCD.
n N 31 Using Your VAIO Computer Using the Pointing Device (on Selected Models Only) The keyboard delivered with VGC-V620G features a pointing device (1), which controls the cursor on the computer screen. You can point to, select and drag objects on the screen using the built-in pointing device. Action Description Point Slide one finger on the pointing device to place the pointer (2) on an item or object. Click Press the left button (3) once. Double-click Press the left button twice.
n N 32 Using Your VAIO Computer Before You Use the Pointing Device Before attempting to use the pointing device, you must activate it. To activate the pointing device 1 Fold the keyboard out. 2 Slide the POINTING DEVICE switch (1) to ON position. 3 Close the lower part of the cover as shown in (2). You can now use the pointing device together with your keyboard. 4 If you only want to use the pointing device, close the cover completely as shown in (3).
n N 33 Using Your VAIO Computer Using the Mouse Your computer includes a wireless optical mouse, which has no cables to plug in and uses a light-emitting diode (LED) instead of a ball. You can use the mouse anywhere you feel comfortable within a range of approximately 31 inches (80 cm)* of the main unit. Avoid using the mouse on a piece of glass or other transparent material; this can interfere with smooth cursor movement on the screen. * Effective usage distance depends on the environment.
n N 34 Using Your VAIO Computer Before You Use the Mouse Before using the wireless mouse, you must establish communication between the computer and the mouse. ✍ To maintain good communication, operate your wireless mouse within the distance limitations of the mouse: approximately 32 feet (10 m) for VGC-V620G or 2.5 feet (80 cm) for VGC-V617G/V600MG from the main unit. Confirm that the supplied AA batteries are properly installed.
n N 35 Using Your VAIO Computer To connect the wireless mouse 1 Insert the two specific AA batteries into the wireless mouse as shown. 2 Turn on the computer. 3 Press the CONNECT button (1) on the computer.
n N 36 Using Your VAIO Computer 4 Turn over the wireless mouse, slide the power switch to the ON position, and press the CONNECT button. Communication between the wireless mouse and the computer should now be established. ✍ Step 3 and 4 must be completed within 10 seconds of each other. Two AA batteries, specific for use in the wireless mouse, are supplied with your computer. They are identified by a sticker "For mouse" on the packaging.
n N 37 Using Your VAIO Computer Adjusting the Mouse Functions 1 Click Start and then Control Panel. 2 Click Printers and Other Hardware. 3 Click the Mouse. The Mouse Properties window appears. 4 Change the settings. To set up your mouse for left-handed users 1 Click the Buttons tab on the Mouse Properties window. 2 Select the option button next to Switch primary and secondary buttons. 3 Click OK. The new mouse settings are now active.
n N 38 Using Your VAIO Computer Using Special-function Buttons Your VAIO computer is provided with special buttons to help you use specific functions of the computer. VGC-V620G Special-function button Functions Standby button Places the computer in Standby mode. Press the power button or the Standby button briefly to resume normal operation. VGC-V617G/V600MG Special-function button Functions Standby button Places the computer in Standby mode.
n N 39 Using Your VAIO Computer Using the Optical Disc Drive Your computer is equipped with an optical disc drive. To insert a disc 1 Turn on the computer. 2 Press the drive eject button (1) to open the drive. The tray slides out.
n N 40 Using Your VAIO Computer 3 Slide a disc from the right onto the disc tray and place it in the middle of the tray with the label facing toward the front of the computer until the disc clicks into place. ! The disc tray is equipped with components sensitive to static electricity on its back. Keep your fingers away from those components when placing a disc on the tray.
n N 41 Using Your VAIO Computer 4 Close the tray by pushing it in gently. ! Do not remove the optical disc when the computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction. ✍ If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program.
n N 42 Using Your VAIO Computer Reading and Writing CDs and DVDs Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your computer. Use the table below to see which types of media your optical disc drive supports.
n N 43 Using Your VAIO Computer Notes on writing data onto a disc ❑ To make the data on a disc readable on an optical disc drive, you need to close the session when you eject it. To complete this process, follow the instructions included with your software. ❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive. ❑ Do not strike or shake the computer while writing data onto a disc.
n N 44 Using Your VAIO Computer Notes on playing DVDs To achieve optimum performance when playing DVDs, you should follow these recommendations. ❑ You can play DVDs using the optical disc drive and the VAIO Zone software. See the help file on the VAIO Zone software for details. ❑ Close all open applications before playing a DVD movie. ❑ Do not use memory-resident utility software to speed up disc access when playing a DVD. This may cause the computer to malfunction.
n N 45 Using Your VAIO Computer Copying Files to CDs To determine which type of CD your computer supports, see Reading and Writing CDs and DVDs (page 42). To copy files to a CD-RW or CD-R 1 Insert a blank CD-R or CD-RW disc into the optical disc drive. If the CD Drive window appears, click Take no action. 2 Open Windows Explorer by pressing the Windows key and the E key simultaneously.
n N 46 Using Your VAIO Computer Playing DVDs To play a DVD 1 Close all open programs. 2 Insert the DVD into the optical disc drive. 3 Click Start and point to All Programs. 4 Select a DVD software program to play the DVD. For instructions on how to use a program, see the help guide included with the DVD software program. Copying Files to DVDs To copy files to a DVD-R or DVD-RW 1 Insert the disc into the optical disc drive. 2 Click Start and point to All Programs.
n N 47 Using Your VAIO Computer Using the TV Function Your computer is equipped with a TV tuner board. In combination with Sony's VAIO Zone software, the TV tuner board allows you to: ❑ Watch, record and play back analog broadcasted cable and terrestrial TV programs, all by remote control. ❑ Digitize analog video and audio using the S-video or composite and audio inputs. ❑ Manage your video units (capsules), preview them and create multiple folders. ❑ Set up a timer to record channels at a repeated time.
n N 48 Using Your VAIO Computer Setting Up TV Connections The best method of connecting your computer system, TV monitor or display, and cable service access, depends on the type of cable connection available in your home. TV signal reception strength will vary widely depending on service availability in your area as well as the type of connection available. One primary cable to connect your computer to a TV cable or antenna is the TV coaxial cable (supplied with your computer).
n N 49 Using Your VAIO Computer Connecting to standard cable access (CATV) To connect in CATV mode (Option 1) 1 Connect one end of the TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). 2 Connect the other end of the coaxial cable to the VHF/UHF port (3) on the computer. To connect in CATV mode (Option 2) 1 Connect the two metal hooks on the 75-ohm/300-ohm RCA transformer cable (1) (optional) to your cable service access (wall outlet) (2).
n N 50 Using Your VAIO Computer Connecting to a standard antenna You can connect your computer to an indoor/outdoor antenna system, using Option 1 or Option 2 from the previous section, Connecting to standard cable access (CATV) (page 49). Depending on the type of antenna system in your home, your connection may require a VHF/UHF RF combiner/transformer (optional) to connect your computer and the indoor/outdoor antenna system.
n N 51 Using Your VAIO Computer To connect in terrestrial mode (Option 2) 1 Connect one end of the antenna's 300-ohm twin lead cable (1) to the screw-type grips at your antenna outlet (2). Connect the other end to the grips on the VHF/UHF RF combiner/transformer (3). 2 Connect the coaxial cable feed connector (4) (optional) to the VHF/UHF RF combiner/transformer (3). 3 Connect the TV coaxial cable (5) (supplied) from the feed connector (4) to the VHF/UHF port (6) on the computer.
n N 52 Using Your VAIO Computer Connecting with a cable or satellite set-top box (STB) You can connect your computer to cable service access that uses a set-top box (cable or satellite). When using the set-top box (STB) setup, you can only change channels through the STB, using its controls or supplied remote commander. When using the STB setup: ❑ A standard TV remote control cannot be used to change TV channels. You can use your TV remote control to set the TV to the channel-out number (channel 3, 4, etc.
n N 53 Using Your VAIO Computer To connect in STB mode (Option 1) 1 Connect one end of a TV coaxial cable (1) (optional) to your cable service access (wall outlet) (2). Connect the other end to the VHF/UHF IN jack on the back panel of your set-top box (STB) (3). 2 Connect a second TV coaxial cable (4) (optional) to the VHF/UHF OUT jack on your STB unit (3). Connect the other end to the single-connection end of a splitter device (5) (optional).
n N 54 Using Your VAIO Computer To connect in STB mode (Option 2) 1 Connect one end of the TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other end to the VHF/UHF IN jack on the back panel of your set-top box (STB) (3). 2 Connect a second TV coaxial cable (4) (optional) to the VHF/UHF OUT jack on your STB unit (3). Connect the other end to the VHF/UHF port (5) on the rear of your TV monitor or display.
n N 55 Using Your VAIO Computer ✍ The video cable adapter (supplied) can be used with a video cable (optional) to connect your set-top box to the computer's S Video In jack.
n N 56 Using Your VAIO Computer Using PC Cards PC Cards allow you to connect portable external devices. Inserting a PC Card To insert a PC Card 1 Insert the PC Card into the PC Card slot with the label facing toward the front of the computer. 2 Gently push the PC Card into the slot. The PC Card is automatically detected by your system. The Safely Remove Hardware icon appears on the taskbar.
n N 57 Using Your VAIO Computer ✍ Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not recognized. Restart your system to correct the problem. Restarting will restore the original state of the computer.
n N 58 Using Your VAIO Computer Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. To remove a PC Card ✍ To remove a PC Card when your computer is off, skip steps 1 to 7. 1 Double-click the Safely Remove Hardware icon on the taskbar. The Safely Remove Hardware window appears. 2 Select the hardware you want to unplug. 3 Click Stop. The Stop a Hardware Device window appears.
n N 59 Using Your VAIO Computer ✍ If you remove the PC Card from the computer when it is still turned on, your system could malfunction and you might lose any unsaved data. Before you remove the PC Card, click the PC Card icon on the taskbar and close the card. Close any applications that use the PC Card before removing the card. Otherwise, data may be lost.
n N 60 Using Your VAIO Computer Using the Memory Stick Media Your VAIO computer supports the Memory Stick media. Memory Stick media is a compact, portable, and versatile device especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and other devices. Because it is removable, it can be used for external data storage. For the latest information on Memory Stick media, visit the Sony online support Web site at http://www.sony.
n N 61 Using Your VAIO Computer Inserting a Memory Stick Media There are two ways you can insert a Memory Stick media into your computer: ❑ Using the Memory Stick media slot; ❑ Using a PC Card slot. To do this, you need an optional PC Card adapter. You can only insert one Memory Stick media at a time.
n N 62 Using Your VAIO Computer To insert a Memory Stick media using the Memory Stick media slot 1 Hold the Memory Stick media with the arrow facing toward the front of your computer and insert it into the Memory Stick media slot in the direction of the arrow. 2 Carefully slide the Memory Stick media into the slot until it clicks in place.
n N 63 Using Your VAIO Computer ! Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging the computer or the Memory Stick media, do not force the Memory Stick media into the slot if it does not insert smoothly. Do not insert more than one Memory Stick media into the Memory Stick media slot. Inserting the media improperly may damage the computer. ✍ Your computer supports Memory Stick Duo media.
n N 64 Using Your VAIO Computer Viewing the Contents Depending on the model you purchased, the Memory Stick window may appear when you insert a Memory Stick media. From this window, you can choose to view, print, copy or organize your images or data stored on the Memory Stick media. If the Memory Stick window does not appear when you insert the Memory Stick media, follow these steps: To view the contents 1 Click Start and then My Computer. The My Computer window appears. 2 Click Memory Stick.
n N 65 Using Your VAIO Computer Formatting a Memory Stick Media Memory Stick media is formatted for immediate use when you purchase it. If you need to reformat Memory Stick media, use the Memory Stick Formatter software that is provided with the media. For more information about using Memory Stick Formatter, see the Memory Stick Formatter help file. ! Formatting Memory Stick media erases all data previously saved to it.
n N 66 Using Your VAIO Computer Removing a Memory Stick Media To remove a Memory Stick media using the Memory Stick media slot 1 Check that the Memory Stick media indicator is off. 2 Push the Memory Stick media in toward the computer. The Memory Stick media ejects. 3 Pull the Memory Stick media out of the slot. ! Always remove the Memory Stick media gently, or it may pop out unexpectedly. Do not remove the Memory Stick media while the Memory Stick media indicator is turned on.
n N 67 Using Your VAIO Computer Using the Internet Setting Up a Dial-up Internet Connection Before you can connect to the Internet, you need to connect your computer to a telephone line via a telephone cable (supplied with VGC-V600MG only). Once you set up your telephone cable, you're ready to connect to the Internet. Note that you need to slide the back panel cover up to access the modem port .
n N 68 Using Your VAIO Computer Using Wireless LAN (WLAN) Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each other through a powerful network. A WLAN is a network in which a user can connect to a local area network (LAN) through a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.
n N 69 Using Your VAIO Computer Communicating without an Access Point (Ad-hoc) An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or Access Point. Each device communicates directly with other devices in the network. You can set up an ad-hoc network easily at home. To communicate without an Access Point (ad-hoc) 1 Turn on the WIRELESS LAN switch. The WIRELESS LAN indicator lights up.
n N 70 Using Your VAIO Computer 7 Click the Add… button. The Wireless network properties window appears. 8 Enter a Network name (SSID)*1. You can choose a 32-digit alphanumeric name. 9 Select Open from the Network Authentication drop-down box. 10 Select WEP from the Data Encryption drop-down box. 11 Deselect the The key is provided for me automatically option button. Some information becomes visible. 12 Enter the Network key*1.
n N 71 Using Your VAIO Computer *1 If you want to communicate between two or more computers, you need to configure all these computers the exact same way. This means that you need to enter the same Network name and the same Network key on all computers as on the first computer you configure. *2 Hexadecimal: A number representation using the digits 0-9, with their usual meaning, plus the letters A-F (or a-f) to represent hexadecimal digits with values of (decimal) 10 to 15.
n N 72 Using Your VAIO Computer Communicating with an Access Point (Infrastructure) An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an Access Point, for example the Sony Access Point. The Access Point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN. The Access Point coordinates transmission and reception from multiple wireless devices within a specific range.
n N 73 Using Your VAIO Computer To disconnect from a wireless network ❑ Turn off the WIRELESS LAN switch. ! Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss. ✍ The WPA key needs to contain at least 8 characters.
n N 74 Using Your VAIO Computer Wireless LAN Channel Selection In an 802.11b/g configuration, channel 1 to 11 can be used. (a) With an Access Point ("Infrastructure") ❑ The channel used will be the channel selected by the Access Point. ! For details on how to select the channel that will be used by the Access Point, see the access point manual. (b) Without an Access Point ("ad-hoc") ❑ If the Wireless connection is initiated by the VAIO computer, channel 11 will be selected.
n N 75 Using Peripheral Devices Using Peripheral Devices You can add functionality to your computer by using the various ports on your unit. ❑ Connecting External Speakers (page 76) ❑ Using the Remote Commander (page 77) ❑ Connecting an External Microphone (page 80) ❑ Connecting a Universal Serial Bus (USB) Device (page 81) ❑ Connecting a Printer (page 84) ❑ Connecting an i.
n N 76 Using Peripheral Devices Connecting External Speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers 1 Plug the speaker cable (1) into the headphones jack (2) i. 2 Plug the other end of the speaker cable to the external speaker (3). 3 Turn down the volume of the speakers before you turn them on. ✍ Make sure your speakers are designed for computer use.
n N 77 Using Peripheral Devices Using the Remote Commander A remote commander is delivered with your computer for extended use of the VAIO Zone software. Point the remote commander to the infrared receiver on your computer for remote operations. See Front (page 10) for the location of the infrared receiver on your model. A Mute button Press to turn off the sound. Press again to restore the sound. B Channel number buttons (0-9) Press to select specific channels.
n N 78 Using Peripheral Devices I VOLUME button Press to raise or lower the volume. J STANDBY button Press to place the system into Stand by mode. (Note: You cannot place the computer into Stand by mode when certain VAIO Zone functions are running.) K ENTER button Press to activate channel selection. See Channel number buttons. L REC button Press to begin recording. (Note: The REC function is available for the VAIO Zone software only.) REC STOP button Press to stop recording.
n N 79 Using Peripheral Devices Before You Use the Remote Commander Insert two AA batteries (supplied) into the remote control, as shown below. ! Do not mix old (used) and new batteries when replacing batteries in the remote control. Always use the same type and manufacture of battery — do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used and new batteries or different types of batteries can damage the remote control.
n N 80 Using Peripheral Devices Connecting an External Microphone If you need to use a sound input device (for example, to chat on the Internet) you need to plug in an external microphone. To connect an external microphone Plug the microphone cable (1) into the microphone jack (2) m. ✍ Make sure your microphone is designed for computer use.
n N 81 Using Peripheral Devices Connecting a Universal Serial Bus (USB) Device To prevent your computer and/or USB devices from damage, observe the following: ❑ When moving your computer with USB devices connected, avoid any shock or force to the USB ports. ✍ You need to slide the back panel cover up to access the USB ports on the bottom panel. Connecting a USB Mouse To connect a USB mouse 1 Choose the USB port (1) you prefer to use. 2 Plug the USB mouse cable (2) into the USB port.
n N 82 Using Peripheral Devices Connecting a USB Floppy Disk Drive You can purchase a USB floppy disk drive and connect it to your computer. To connect a USB floppy disk drive 1 Choose the USB port you prefer to use. 2 Plug the USB floppy disk drive cable into the USB port. The VAIO logo on the disk drive should be facing up. Your USB floppy disk drive is now ready for use. ! When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.
n N 83 Using Peripheral Devices Disconnecting a USB floppy disk drive You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in a power saving mode (Standby or Hibernate) may cause the computer to malfunction. If your computer is off, you can unplug the USB cable directly from the computer. To disconnect a USB floppy disk drive 1 Close all programs accessing the floppy disk drive.
n N 84 Using Peripheral Devices Connecting a Printer You can connect a Windows-compatible printer to your computer to print documents. Connecting a Printer Using the USB Port You can connect a USB printer compatible with your version of Windows to your computer. ✍ You need to slide the back panel cover up to access the USB ports on the bottom panel. To connect a printer using the USB port 1 Plug the printer power cord into an AC outlet (1).
n N 85 Using Peripheral Devices Connecting an i.LINK Device Notes on connecting i.LINK devices ❑ Your computer includes an i.LINK (IEEE1394) port, which you can use to connect to an i.LINK device such as a digital video camera recorder or to connect two VAIO computers in order to copy, delete or edit files. ❑ The i.LINK port of your computer does not supply power to external devices generally powered by i.LINK ports. ❑ The i.
n N 86 Using Peripheral Devices Connecting a Digital Video Camera Recorder ✍ You need to slide the back panel cover up to access the i.LINK port on the bottom panel. To connect a digital video camera recorder 1 2 Plug one end of the i.LINK cable (1) into the i.LINK port (2) on the computer and the other end into the DV In/Out ports (3) on the digital video camera recorder. Launch the DVgate Plus software. ✍ On Sony digital video cameras, ports labeled DV Out, DV In/Out or i.LINK are i.LINK-compatible.
n N 87 Using Peripheral Devices Connecting to a Network (LAN) You can connect your computer to 100BASE-TX/10BASE-T-type networks via an Ethernet network cable. Connect one end of an optional network cable to the Network (Ethernet) port on the bottom panel of your computer and the other end to your network. For detailed settings and devices needed to connect to the network, see your Network Administrator. ✍ You need to slide the back panel cover up to access the network (Ethernet) port.
n N 88 Using Peripheral Devices ! Network and telephone lines cannot be connected to the Network (Ethernet) port on your computer. If the following connectors are connected to the telephone lines mentioned below, high electric current to the connectors may cause damage, overheating or fire.
n N 89 Customizing Your VAIO Computer Customizing Your VAIO Computer This section briefly describes how to change the main settings of your computer.
n N 90 Customizing Your VAIO Computer Setting the Password Use one of the BIOS functions to set the password. Once you have set the password, you will have to enter the password after the VAIO logo appears. In this way, you can protect your computer from unauthorized access. ! You cannot start your computer without entering the password. Make sure not to forget the password. If you forget the password and need assistance to cancel it, a cancellation fee will be charged.
n N 91 Customizing Your VAIO Computer Changing/Removing the Password To change or remove the password 1 Turn on your computer. 2 Press the F2 key when the VAIO logo appears. 3 Enter the current password for Enter Current Password: The BIOS setup screen appears. 4 Use the < or , key to select Security on the Boot menu to display another screen, select Change Supervisor Password, and then press the Enter key. 5 On the password entry screen, enter a new password twice; and press the Enter key.
n N 92 Customizing Your VAIO Computer Setting Up Your Computer with VAIO Control Center The VAIO Control Center utility allows you to consult system information and specify preferences for system behavior. To use VAIO Control Center 1 Click Start, point to All Programs, and click VAIO Control Center. The VAIO Control Center window appears. Control item Description System Information Displays the information about your operating system, the hardware configuration, and software information.
n N 93 Customizing Your VAIO Computer Using the Power Saving Modes In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate. The color of the power indicator light behind the power button tells you which mode the computer is in. Power indicator Mode Green Computer is in Normal mode (on). Amber Computer is in Standby mode. No light Computer is turned off or in Hibernate mode.
n N 94 Customizing Your VAIO Computer Using Normal Mode This is the normal state of your computer when it is in use. The green power indicator light is on in this mode. To save power while not working, you can turn off a specific device such as the LCD or the hard disk.
n N 95 Customizing Your VAIO Computer Using Standby Mode Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber power light flashes in this mode. To activate Standby mode 1 Click Start and then Turn Off Computer. 2 Click Stand By. ✍ Alternatively, you can press the Standby button on the keyboard to put your computer in Standby mode. To return to Normal mode Press any key.
n N 96 Customizing Your VAIO Computer Using Hibernate Mode In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. The power indicator light is off in this mode. To activate Hibernate mode 1 Click Start and then Turn Off Computer. 2 Hold down the Shift key and click Hibernate. To return to Normal mode Turn on the computer by pressing the power button. The computer returns to its previous state.
n N 97 Upgrading Your VAIO Computer Upgrading Your VAIO Computer Your computer and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee due to mishandling, we recommend that: ❑ You contact your dealer to install a new memory module. ❑ You do not install it yourself, if you are not familiar with upgrading memory on a computer. ❑ You do not touch the connectors or open the memory panel.
n N 98 Upgrading Your VAIO Computer Adding and Removing Memory If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules. Before you upgrade your computer's memory, read the notes and procedures in the following pages. The number of available slots depends on the configuration of your computer. Notes on adding/removing memory modules ❑ Be careful when changing memory. Improper installation of memory modules may cause damage to your system.
n N 99 Upgrading Your VAIO Computer ❑ Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of the computer, will result in damage to the computer and any repair costs will not be covered by the warranty.
n N 100 Upgrading Your VAIO Computer Removing and Installing a Memory Module To remove a memory module 1 Shut down and unplug your computer, and then disconnect all peripheral devices. 2 Gently place the main unit on a flat and stable surface, with the LCD screen facing down. ! Use caution when placing the LCD screen face-down on a table or other flat surface. The work surface must be free of dirt or debris that may damage the screen. 3 Slide the back panel cover up until it stops.
n N 101 Upgrading Your VAIO Computer 4 Press and hold the back panel cover release tab (indicated by the arrow) and slide the back panel cover further up.
n N 102 Upgrading Your VAIO Computer 5 Lift the back panel cover away from the unit to remove. 6 Remove the screws on the memory cover (1).
n N 103 Upgrading Your VAIO Computer 7 Disengage the memory cover tabs from the slots on the computer by lifting the edge of the memory cover, and then remove the memory cover. 8 Locate the memory module(s) you wish to remove. 9 Push down on the latches (1), located on both sides of the module, to gently eject it from the slot.
n N 104 Upgrading Your VAIO Computer 10 Grasp the memory module by the sides and remove from the main unit. Store the module in a static-free bag.
n N 105 Upgrading Your VAIO Computer To install a memory module 1 Remove the memory module from its anti-static package, handling it by the edges. 2 Locate the center notch (1) on the bottom edge of the memory module and align it to the center notch in the open module slot. 3 Firmly insert the lower edge of the module (2) into the slot by pressing down evenly against the module's upper corners. 4 The side latches (3) snap into position, holding the memory module in place.
n N 106 Upgrading Your VAIO Computer 5 Align the memory cover tabs to the slots on the computer and gently press down on the cover until it snaps into place. 6 Replace the screws in the memory cover. 7 Place the back panel cover against the computer, aligning it to the tracks on each side (1).
n N 107 Upgrading Your VAIO Computer 8 Gently slide the back cover onto the computer until it gently snaps into place.
n N 108 Upgrading Your VAIO Computer Viewing the Amount of Memory To view the amount of memory 1 Turn on the computer. 2 Click Start, point to All Programs, and click VAIO Control Center. 3 Double-click the System Information folder in the VAIO Control Center window. 4 Double-click the System Information icon in the System Information folder. You can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and restart the computer.
n N 109 Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage.
n N 110 Precautions On Handling the LCD Screen ❑ Do not leave the LCD facing the sun. This could damage the LCD. Be careful when using the computer near a window. ❑ Do not scratch the LCD or exert pressure on it. This could cause a malfunction. ❑ Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal.
n N 111 Precautions On Using the Power Source ❑ See the online Specifications sheet to check the power operation of your computer. ❑ Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder. ❑ You can purchase a power strip with a surge protector. This device prevents damage to your computer caused by sudden power surges, in an electrical storm, for example. ❑ Do not place heavy objects on the power cord. ❑ To disconnect the cord, pull it out by the plug.
n N 112 Precautions On Handling Your Computer ❑ Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer. ❑ If you drop a solid object or any liquid onto the computer, shut down your computer and then unplug it. You may want to have the computer checked by qualified personnel before operating it again.
n N 113 Precautions ❑ If the computer is brought directly from a cold location to a warm one, moisture may condense inside your computer. In this case, allow at least one hour before turning on your computer. If any problems occur, unplug your computer and contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony online support Web site. ❑ Make sure you disconnect the power cord before cleaning the computer.
n N 114 Precautions On Handling Discs ❑ Do not touch the surface of the disc. ❑ Do not drop or bend the disc. ❑ Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole, as shown below: ❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc.
n N 115 Precautions On Handling Memory Stick Media ❑ Do not use the media in locations that are subject to static electricity or electrical noise. ❑ Do not touch the Memory Stick media connector with your finger or metallic objects. ❑ Use only the label supplied with the Memory Stick media as a label. ❑ Do not bend, drop, or apply strong shock to the Memory Stick media. ❑ Do not disassemble or modify Memory Stick media. ❑ Do not let Memory Stick media get wet.
n N 116 Precautions On Handling the Hard Disk The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by mechanical vibration, shock or dust. Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you should be careful when handling your computer. To avoid damaging your hard disk ❑ Do not subject your computer to sudden movements. ❑ Keep the computer away from magnets.
n N 117 Troubleshooting Troubleshooting This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. Try these suggestions before visiting the Sony online support Web site at http://www.sony.com/pcsupport for customers in USA and Canada, or at http://kdb.sony-latin.com/ for customers in Latin American countries or areas.
n N 118 Troubleshooting Computer What should I do if my computer won't start? ❑ Make sure the computer is securely plugged into a power source and turned on. Make sure the power indicator shows the power is on. ❑ Make sure the optical disc drive (if applicable) is empty. ❑ If the computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS is turned on and working.
n N 119 Troubleshooting What should I do if a BIOS error appears when my computer starts? If the message "Press F2 to setup" appears at the bottom of the screen 1 Press the F2 key when the VAIO logo appears. The BIOS setup screen appears. 2 Press the , key to select the Exit menu. 3 Press the m key to select Load Setup Defaults. 4 Press the Enter key. The Load Setup Defaults window appears. 5 Select OK, and press the Enter key. 6 Select Exit (Save Changes), and press the Enter key.
n N 120 Troubleshooting What should I do if the message "Operating system not found" appears when my computer starts, and why won't Windows start? ❑ Make sure the computer does not have a "non-bootable" CD or DVD in the optical disc drive (if applicable). ❑ If a non-bootable media is in the drive: 1 Remove the media. 2 Restart the computer and confirm that the Microsoft Windows operating system starts properly.
n N 121 Troubleshooting What should I do if my computer or software stops responding? ❑ It is best to turn off your computer using the Turn Off Computer option on the Microsoft Windows Start menu, located on the taskbar. Using other methods, including those listed below, may result in loss of unsaved data. ❑ Click Start, point to Turn Off Computer, and then click Turn Off. ❑ If your computer does not turn off, press the Ctrl+Alt+Delete keys simultaneously.
n N 122 Troubleshooting Why won't my computer enter Standby or Hibernate mode? Your computer may become unstable if the operating mode is changed before the computer completely enters Standby or Hibernate. To restore the computer to normal operating stability 1 Close all open programs. 2 Restart the computer. Follow these steps: 3 4 1 Press the Windows key. 2 Press the U key. 3 Press the R key to select restart.
n N 123 Troubleshooting What should I do if I start my computer and the message "System Disabled" appears and Windows does not start? If you enter a wrong power-on password three times consecutively, the System Disabled message appears and Windows does not start. Press the power button for more than four seconds to check that the power indicator goes off. Wait for 10 or 15 seconds, then restart your computer and enter the correct password.
n N 124 Troubleshooting System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly.
n N 125 Troubleshooting To visit the Windows Updates web site 1 Connect to the Internet. 2 Type http://windowsupdate.microsoft.com/ in the address bar of your browser. The Microsoft Windows Update and Security Warning windows appear. 3 In the Security Warning window, click Yes to install and run Windows Update. 4 In the Microsoft Windows Update window, select Express Install or Custom Install, and follow the on-screen instructions.
n N 126 Troubleshooting Internet Why doesn't my modem work? ❑ Make sure the telephone cable is securely plugged into the Modem port on the computer and the wall jack. ❑ Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone. ❑ Make sure the telephone number the program is dialing is correct. ❑ Make sure the software you are using is compatible with the computer's modem. (All preinstalled Sony programs are compatible.
n N 127 Troubleshooting Why is my modem connection slow? Your computer is equipped with a V.92/ V.90 compatible modem. Many factors may influence modem connection speed, including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems.
n N 128 Troubleshooting Networking Why can't my computer connect to a wireless LAN access point? ❑ Connection availability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using. ❑ Make sure the WIRELESS LAN switch is on and the Wireless indicator is lit on the computer. ❑ Make sure power to the access point is on. ❑ Check the following setting: 1 Click Start and then Control Panel.
n N 129 Troubleshooting Why is the data transfer speed slow? ❑ The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed, move your computer away from obstructions or closer to any access point you may be using.
n N 130 Troubleshooting CDs and DVDs Why does my computer freeze when I try to read a disc? The disc your computer is trying to read may be dirty or damaged. Follow these steps: 1 Restart the computer by clicking Start, Turn Off Computer, and Restart. 2 Eject the disc from the optical disc drive. 3 Examine the disc for dirt or damage. If the disc is dirty, see On Handling Discs (page 114) for instructions on how to clean it.
n N 131 Troubleshooting What should I do if the optical disc drive isn't playing my CD or DVD properly? ❑ Make sure the disc was inserted into the optical disc drive with the label facing up. ❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions. ❑ If the CD or DVD is dirty or damaged, the computer will stop responding.
n N 132 Troubleshooting 6 Double-click the listed drive, and select the Properties tab. 7 Click to select the Enable digital CD audio for this CD-ROM device check box, if it is not selected. You can confirm the driver software by selecting the Driver tab, and clicking Driver Details. 8 Click OK to close the window. ❑ Make sure an adhesive label was not attached to the CD or DVD. Adhesive labels can come off while the disc is in the optical disc drive and damage the drive or cause it to malfunction.
n N 133 Troubleshooting Display Why did the computer screen (LCD) go blank? ❑ Your computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or Hibernate). If the computer is in Standby mode, press any key to activate the computer screen. See Using the Power Saving Modes (page 93) for more information. ❑ Make sure the computer is plugged into a power source and is on. The power indicator on the computer will be on if the computer is on.
n N 134 Troubleshooting Printing Why can't I print a document? ❑ Make sure the printer is on, and the printer cable is securely connected to the ports on your printer and computer. ❑ Make sure the printer is compatible with the Windows operating system installed on your computer. ❑ You may need to install the printer driver software before you use the printer. See the manual that accompanied the printer for more information.
n N 135 Troubleshooting Microphone Why doesn't my microphone work? If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the Microphone jack on the computer.
n N 136 Troubleshooting Mouse What should I do if the computer doesn't recognize the mouse? ❑ Confirm that the supplied AA batteries are properly installed. ❑ Press the CONNECT button on the mouse and the computer to re-establish the connection between the two devices. What should I do if the pointer doesn't move when I use the mouse? ❑ Make sure another mouse is not installed. ❑ If you are playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart the computer.
n N 137 Troubleshooting Speakers Why won't my speakers work? ❑ Make sure the speakers are properly connected and the volume is turned up loud enough to hear sound. ❑ Your speakers may not be designed for computer use. ❑ If the speakers have a mute button, set the button to off. ❑ If the speakers have a volume control, make sure the volume is turned up loud enough to hear sound.
n N 138 Troubleshooting Pointing Device What should I do if the pointing device does not work? ❑ Try restarting your computer. Follow these steps: 1 Press the Windows key. 2 Press the U key. The Turn off computer window opens. 3 Press the R key to restart the computer. ❑ If the computer does not restart, follow these steps: 1 Press the Ctrl+Alt+Delete keys simultaneously. The Windows Task Manager window appears.
n N 139 Troubleshooting How do I change the left and right button assignments? If your computer is interpreting a single-click as a double-click, you may want to change the button assignments. Follow these steps: 1 Click Start and then Control Panel. 2 Click Printers and Other Hardware. 3 Click Mouse. 4 On the Buttons tab, select your preferences in the Button Configuration box, and then click Apply to install your settings.
n N 140 Troubleshooting Keyboard What should I do if the keyboard configuration is wrong? ❑ The language layout of your computer's keyboard is specified on the sticker on the box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched. ❑ To change the keyboard configuration, follow these steps: 1 Click Start and then Control Panel 2 Click Date, Time, Language and Regional Options. 3 Change the settings as desired.
n N 141 Troubleshooting Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? The computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: 1 Close all programs that were accessing the floppy disk drive.
n N 142 Troubleshooting PC Cards Why doesn't my PC Card work? ❑ Make sure the PC Card is inserted properly. See Inserting a PC Card (page 56) for more information. ❑ Make sure the PC Card is compatible with the Microsoft Windows operating system installed on your computer. ❑ See the instructions that accompanied your PC Card. You may need to install driver software if you are not using a Sony PC Card.
n N 143 Troubleshooting Audio/Video Why can't I use the DV camera recorder? You may not be able to use the DV camera recorder, and the message DV equipment seems to be disconnected or turned off may appear because the i.LINK cable is not securely plugged into the ports on the computer or camera. Unplug the connectors, and plug them in again. See Connecting an i.LINK Device (page 85) for more information. i.LINK is a trademark of Sony used only to designate that a product contains an IEEE1394 connection.
n N 144 Troubleshooting Memory Stick Media Why can't I open my image files? You may need to reformat your Memory Stick media. Formatting Memory Stick media erases all data, including music data, previously saved to it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep. 1 Copy the data from the Memory Stick media onto your computer's hard disk to save data or images.
n N 145 Troubleshooting Peripherals What should I do if I cannot connect a USB device? ❑ If applicable, check the USB device is switched on and using its own power supply. For example, if you are using a digital camera, check the battery is charged. If you are using a printer, check the power cable is connected properly to the AC outlet. ❑ Try using a different USB port on your computer. The driver could be installed to the specific port you used the first time you connected the device.
n N 146 Support Options Support Options The section contains information on where to go for answers to questions about your VAIO computer and the preinstalled software. Sony Support Information See the following sources for answers in the sequence listed below. 1 VAIO Computer Documentation This on-screen User Guide (this manual) and the printed Welcome mat provide detailed information on how to maximize your computer's capabilities and solve common problems.
n N 147 Support Options 5 VAIO Update When your computer is connected to the Internet, VAIO Update automatically notifies you when critical software and security information is posted on the support web site. Click the VAIO Update notice to open the VAIO Support web site and view the information. You can also right-click the VAIO Update icon on the Taskbar Notification area and select Go to VAIO Web Support to open the support web site.
n N 148 Support Options In order to contact a Sony technical support representative, please call the following numbers: ❑ In Argentina: (011) 6770-SONY (7669) ❑ In Mexico: In Mexico City: 2122-9819 In the Mexican Republic: 01-800-715-4331 ❑ In Colombia: 01-800-550-7000 ❑ In Peru: 0-801-1-7000 or 221-6699 ❑ In Chile: Sony answers: 800-261-800 From cellular phones: 02-754-6333 ❑ In Venezuela: 0-800-1-SONY-00 (0-800-1-7669-00)
n N 149 Support Options Program Support Information Depending on the computer model and particular configuration you purchased, your computer may not include all of the software programs listed below. Adobe® Photoshop® Elements, Photoshop® Album, Premiere®, Reader® Adobe Systems Inc. ❑ For users in USA and Canada Web Site http://www.adobe.com/support Telephone 800-685-3652 America Online® (Broadband or Dial-Up) AOL, Inc. ❑ For users in USA and Canada Web Site http://www.aol.
n N 150 Support Options Click to DVD™ Sony Electronics Inc. At the touch of a button, Click to DVD software allows you to automatically burn DVDs from a digital video (DV) device. Create DVDs by capturing video content straight from a DV device or by importing video from stored files — and you can also edit the video. Create DVD photo albums and slide shows with picture files or by importing pictures from a digital still camera.
n N 151 Support Options Google Toolbar™ Google, Inc. ❑ For users in USA and Canada Web Site http://toolbar.google.com/help.html Microsoft® Office Basic Edition, Office Professional Edition, Office Small Business Edition, Office Small Business Edition Trial Version, Office Student and Teacher Edition Trial Version Microsoft Corp. ❑ For users in USA and Canada Web Site http://support.microsoft.com Microsoft® Internet Explorer, Movie Maker, Media Player, Works Microsoft Corp.
n N 152 Support Options Netscape® Internet Service AOL Inc. ❑ For users in USA and Canada Web Site http://isp.netscape.com/help Telephone 866-541-8233 Norton Internet Security™ Symantec Corporation ❑ For users in USA and Canada Web Site http://www.symantec.com/techsupp PictureGear Studio™ Sony Electronics Inc. PictureGear Studio still image management software displays still images from your hard drive or a Sony digital still camera.
n N 153 Support Options Quattro Pro® Corel Corporation ❑ For users in USA and Canada Web Site http://www.corel.com Quicken® New User Edition Intuit Inc. ❑ For users in USA and Canada Web Site http://www.intuit.com/support/quicken/ RecordNow! Sonic Solutions ❑ For users in USA and Canada Web Site http://support.sonic.
n N 154 Support Options SonicStage® Sony Electronics Inc. The SonicStage jukebox software program gives you all the tools you need to manage music on your computer. SonicStage software sports high-quality digital audio storage, a sleek player skin design, and audio CD burning capability. ❑ For users in USA and Canada Web Site http://www.sony.com/pcsupport Telephone 888-4-SONY-PC (888-476-6972) ❑ For users in Latin American countries or areas Web Site http://kdb.sony-latin.
n N 155 Support Options SpySubtract® InterMute, Inc. ❑ For users in USA and Canada Web Site http://www.intermute.com/support.html VAIO Action Setup Sony Electronics Inc. VAIO Action Setup manages the settings for your computer's shortcut keys. ❑ For users in USA and Canada Web Site http://www.sony.com/pcsupport Telephone 888-4-SONY-PC (888-476-6972) ❑ For users in Latin American countries or areas Web Site http://kdb.sony-latin.com/ VAIO Control Center Sony Electronics Inc.
n N 156 Support Options VAIO Edit Components Sony Electronics Inc. VAIO Edit Components is a software plug-in for Adobe® Premiere® software that provides maximum compatibility and video quality for capturing video from your Sony digital camcorder. ❑ For users in USA and Canada Web Site http://www.sony.com/pcsupport Telephone 888-4-SONY-PC (888-476-6972) ❑ For users in Latin American countries or areas Web Site http://kdb.sony-latin.com/ VAIO Media™ Sony Electronics Inc.
n N 157 Support Options VAIO Update Sony Electronics Inc. The VAIO Update utility helps you keep your VAIO® computer up to date by regularly checking the Sony Online Support Web site for important software updates and information for your specific VAIO computer model. ❑ For users in USA and Canada Web Site http://www.sony.com/pcsupport Telephone 888-4-SONY-PC (888-476-6972) ❑ For users in Latin American countries or areas Web Site http://kdb.sony-latin.com/ VAIO Wireless Utility Sony Electronics Inc.
n N 158 Support Options VAIO Zone Sony Electronics Inc. VAIO Zone software provides an effortless way to browse and enjoy pictures, music, and video files on your computer, all through an elegant, next-generation interface. You can even enjoy media content stored on other VAIO® computers on your network. On VAIO computer models with a recordable DVD drive, VAIO Zone enables you to record video and slide shows of pictures to DVD.
