Datasheet

2
Two-way Camcorder Support System
Sony’s new VCT-SP2BP camcorder support is designed to smoothly integrate
with consumer and professional tripod heads. A quick release system allows
camera operators to easily follow the action from tripod to stabilized handheld
shooting and back again.
Easy transformation from tripod operation
style to shoulder support style
Preset the shoulder pad to fit your size
VCT-SP2BP
Minimum length (Approx.)
359 mm
Chest pad opening angle
0° ~ 90°
Chest pad opening
stiffness adjusting dial
Minimum length (Approx.)
249 mm
Maximum length (Approx.)
363 mm
Maximum length (Approx.)
470 mm
Chest pad adjust lock
Shoulder pad preset screw
Tripod attachment
screw
Shoulder pad adjust lock
Perfect Design for Both Shoulder Support and Tripod Usage
Comes with various adaptors
Adjust the length of the shoulder pad
and fix it using a screw
1. Easily detach the
camcorder from tripod
5. A three point support is
achieved using the
“shoulder”, “chest” and
“your hand”
2. Stretch out the shoulder
pad and put camcorder
on shoulder
* Instant support is available using only the
shoulder pad
3. Lower the chest pad
4. Stretch out the chest pad
Comes with VCT-U14 Adaptor
Comes with an
accessory adaptor
Various accessories can be
mounted
Ex. Wireless microphone receiver
Screw the accessory adaptor on to VCT-SP2BP