Owner's Guide VAIO notebook
Table Of Contents
- Contents
- Welcome
- Using Your VAIO Notebook
- Using the Keyboard
- Using the Touchpad
- VAIO Action Setup
- Using the Center Jog Dial Control
- Using the Optical Disc Drive
- Using PC Cards
- Using Memory Stick Media
- Using a Second Battery Pack
- Using the Weight Saver
- Using Power Saving Modes
- Connecting a Phone Line
- Connecting to a Local Area Network
- Connecting to a Wireless LAN
- Connecting Peripheral Devices
- Connecting an External Floppy Disk Drive
- Connecting a Port Replicator
- Connecting a PS/2 External Mouse or Keyboard
- Connecting an Audio Device
- Connecting an Audio-Video Device
- Connecting a Parallel Port Printer
- Connecting a USB Printer
- Connecting an External Display
- Connecting a Universal Serial Bus Device
- Connecting an i.LINK Device
- Connecting with another VAIO computer
- Connecting External Speakers
- Connecting an External Microphone
- Expanding Your Notebook Capabilities
- Customizing Your VAIO Notebook
- Adding Memory
- About the Software on Your Notebook
- Using the Recovery CDs
- Troubleshooting
- Troubleshooting Your Notebook
- My notebook does not start.
- My notebook starts but a BIOS error appears.
- My notebook starts, but the message “Operating system not found” appears and Windows does not start.
- My notebook stops responding or does not shut down.
- The power management setting is not responding.
- The sound of my notebook’s fan is too loud.
- Why does the System Properties dialog box display a slower CPU speed than advertised?
- Troubleshooting the LCD Screen
- Troubleshooting the Mouse and Touchpad
- Troubleshooting Drives, PC Cards, and Peripheral Devices
- I cannot establish a connection between two VAIO® computers when using an i.LINK cable.
- My floppy disk drive (optional) cannot write to a floppy disk.
- My optical disc drive is not playing my CD or DVD properly.
- My optical drive tray does not open.
- I cannot use Digital Video (DV) devices. The message “DV equipment seems to be disconnected or tu...
- My PC Card is not working.
- Troubleshooting Software
- My software program stops responding or crashes.
- When I click an application icon, the message “You must insert the application CD into your optic...
- What software do I use for CD-R/CD-RW software functions?
- Why is my computer operating improperly after downloading the CD-burning feature of RealJukebox® ...
- I cannot use the DVgate™ software.
- Troubleshooting the Modem
- Troubleshooting Audio
- Troubleshooting the Printer
- Troubleshooting Wireless LAN
- Troubleshooting Your Notebook
- Getting Help
- Index
Connecting an Audio-Video Device
67
To change the display
If you insert a DVD in your optical drive to watch on your TV, the Fn+F8 key
combination mig ht not activate the function to toggle b etween your LCD and TV.
Follow the procedure below.
1 Connect the TV to the noteboo k.
2 Restart the notebook and wait until it finishes reboo ting.
3 Use the Fn+F8 key combinati on to toggle between the LCD and TV di splay.
The DVD will play on only one display at a time, so select either LCD or TV
as the primary display. See “Sel ecting the Display Mode” for more
information.
4 Re-insert your DVD to laun ch your DVD software.
✍ A part of the image cannot be displayed on your TV display if the resolution of your
notebook is more than 1024 x 768 dots.