Owner's Guide VAIO notebook
Table Of Contents
- Contents
- Welcome
- Using Your VAIO Notebook
- Using the Keyboard
- Using the Touchpad
- VAIO Action Setup
- Using the Center Jog Dial Control
- Using the Optical Disc Drive
- Using PC Cards
- Using Memory Stick Media
- Using a Second Battery Pack
- Using the Weight Saver
- Using Power Saving Modes
- Connecting a Phone Line
- Connecting to a Local Area Network
- Connecting to a Wireless LAN
- Connecting Peripheral Devices
- Connecting an External Floppy Disk Drive
- Connecting a Port Replicator
- Connecting a PS/2 External Mouse or Keyboard
- Connecting an Audio Device
- Connecting an Audio-Video Device
- Connecting a Parallel Port Printer
- Connecting a USB Printer
- Connecting an External Display
- Connecting a Universal Serial Bus Device
- Connecting an i.LINK Device
- Connecting with another VAIO computer
- Connecting External Speakers
- Connecting an External Microphone
- Expanding Your Notebook Capabilities
- Customizing Your VAIO Notebook
- Adding Memory
- About the Software on Your Notebook
- Using the Recovery CDs
- Troubleshooting
- Troubleshooting Your Notebook
- My notebook does not start.
- My notebook starts but a BIOS error appears.
- My notebook starts, but the message “Operating system not found” appears and Windows does not start.
- My notebook stops responding or does not shut down.
- The power management setting is not responding.
- The sound of my notebook’s fan is too loud.
- Why does the System Properties dialog box display a slower CPU speed than advertised?
- Troubleshooting the LCD Screen
- Troubleshooting the Mouse and Touchpad
- Troubleshooting Drives, PC Cards, and Peripheral Devices
- I cannot establish a connection between two VAIO® computers when using an i.LINK cable.
- My floppy disk drive (optional) cannot write to a floppy disk.
- My optical disc drive is not playing my CD or DVD properly.
- My optical drive tray does not open.
- I cannot use Digital Video (DV) devices. The message “DV equipment seems to be disconnected or tu...
- My PC Card is not working.
- Troubleshooting Software
- My software program stops responding or crashes.
- When I click an application icon, the message “You must insert the application CD into your optic...
- What software do I use for CD-R/CD-RW software functions?
- Why is my computer operating improperly after downloading the CD-burning feature of RealJukebox® ...
- I cannot use the DVgate™ software.
- Troubleshooting the Modem
- Troubleshooting Audio
- Troubleshooting the Printer
- Troubleshooting Wireless LAN
- Troubleshooting Your Notebook
- Getting Help
- Index

Connecting to a Wireless LAN
47
You can also connect an access point to a telephone line, Integrated Services
Digital Network (ISDN) ro uter, cable modem, or Digital Subscriber Line (DSL)
modem to share access to the Internet among multiple computers.
Communicating with an Access Point (infrastructure)
An infrastructure network is one that extends an existing wired local network to
wireless devices by providing an access point. The access point bridges the
wireless and wired LAN and acts as a cen tral controller for the Wireless LAN.
The access point coordinates transmission and reception from multiple wireless
devices within a specific range.
To communicate with an access point
1 Turn on the notebook, and insert th e Wireless LAN PC Card in to the
notebook’s PC Card slot on the left. Make sure you push the base of the
antenna or sides of the card. Pushing the prot ruding part of the antenna could
damage it.
2 Click Start on the Windows taskbar, and then Control Pan el.
3 Click Netwo rk and Internet Con nectio ns, and then Network Connections.
4 Double-click th e Wireless Network Connectio n icon. The Connect to
Wireless Network di alog box opens.
✍ For information on available Sony products, go to: http://www.sonystyle.com/vaio.
Communicating via Wireless LAN Access Point










