Owner's Guide VAIO notebook
Table Of Contents
- Contents
- Welcome
- Using Your VAIO Notebook
- Using the Keyboard
- Using the Touchpad
- VAIO Action Setup
- Using the Center Jog Dial Control
- Using the Optical Disc Drive
- Using PC Cards
- Using Memory Stick Media
- Using a Second Battery Pack
- Using the Weight Saver
- Using Power Saving Modes
- Connecting a Phone Line
- Connecting to a Local Area Network
- Connecting to a Wireless LAN
- Connecting Peripheral Devices
- Connecting an External Floppy Disk Drive
- Connecting a Port Replicator
- Connecting a PS/2 External Mouse or Keyboard
- Connecting an Audio Device
- Connecting an Audio-Video Device
- Connecting a Parallel Port Printer
- Connecting a USB Printer
- Connecting an External Display
- Connecting a Universal Serial Bus Device
- Connecting an i.LINK Device
- Connecting with another VAIO computer
- Connecting External Speakers
- Connecting an External Microphone
- Expanding Your Notebook Capabilities
- Customizing Your VAIO Notebook
- Adding Memory
- About the Software on Your Notebook
- Using the Recovery CDs
- Troubleshooting
- Troubleshooting Your Notebook
- My notebook does not start.
- My notebook starts but a BIOS error appears.
- My notebook starts, but the message “Operating system not found” appears and Windows does not start.
- My notebook stops responding or does not shut down.
- The power management setting is not responding.
- The sound of my notebook’s fan is too loud.
- Why does the System Properties dialog box display a slower CPU speed than advertised?
- Troubleshooting the LCD Screen
- Troubleshooting the Mouse and Touchpad
- Troubleshooting Drives, PC Cards, and Peripheral Devices
- I cannot establish a connection between two VAIO® computers when using an i.LINK cable.
- My floppy disk drive (optional) cannot write to a floppy disk.
- My optical disc drive is not playing my CD or DVD properly.
- My optical drive tray does not open.
- I cannot use Digital Video (DV) devices. The message “DV equipment seems to be disconnected or tu...
- My PC Card is not working.
- Troubleshooting Software
- My software program stops responding or crashes.
- When I click an application icon, the message “You must insert the application CD into your optic...
- What software do I use for CD-R/CD-RW software functions?
- Why is my computer operating improperly after downloading the CD-burning feature of RealJukebox® ...
- I cannot use the DVgate™ software.
- Troubleshooting the Modem
- Troubleshooting Audio
- Troubleshooting the Printer
- Troubleshooting Wireless LAN
- Troubleshooting Your Notebook
- Getting Help
- Index
Connecting to a Local Area Network
45
Connecting to a Local Area Network
You can connect your notebook to 10 BASE-T and 100BASE-TX-type Local
Area Networks (LANs). For the detailed settings and devices needed to connect
to the network, ask your network administrator.
Setting up your Ethernet connection
To connect to the network
1 Click Start on the Windows® taskbar, and select My Computer.
2 In the Other Places box on the left, click My Network Places.
3 In the Network Tasks box, click Add a network place or click Set up a home
or small office network, depending on your configuration . Depending on
your choice, either the Add Network Place W izard or Network Setup Wizard
window appears.
4 Follow the on-screen inst ructions.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the Ethernet
port. Do not connect any other type of network cable or phone cable.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
Ethernet
port