Owner's Guide VAIO notebook
Table Of Contents
- Contents
- Welcome
- Using Your VAIO Notebook
- Using the Keyboard
- Using the Touchpad
- VAIO Action Setup
- Using the Center Jog Dial Control
- Using the Optical Disc Drive
- Using PC Cards
- Using Memory Stick Media
- Using a Second Battery Pack
- Using the Weight Saver
- Using Power Saving Modes
- Connecting a Phone Line
- Connecting to a Local Area Network
- Connecting to a Wireless LAN
- Connecting Peripheral Devices
- Connecting an External Floppy Disk Drive
- Connecting a Port Replicator
- Connecting a PS/2 External Mouse or Keyboard
- Connecting an Audio Device
- Connecting an Audio-Video Device
- Connecting a Parallel Port Printer
- Connecting a USB Printer
- Connecting an External Display
- Connecting a Universal Serial Bus Device
- Connecting an i.LINK Device
- Connecting with another VAIO computer
- Connecting External Speakers
- Connecting an External Microphone
- Expanding Your Notebook Capabilities
- Customizing Your VAIO Notebook
- Adding Memory
- About the Software on Your Notebook
- Using the Recovery CDs
- Troubleshooting
- Troubleshooting Your Notebook
- My notebook does not start.
- My notebook starts but a BIOS error appears.
- My notebook starts, but the message “Operating system not found” appears and Windows does not start.
- My notebook stops responding or does not shut down.
- The power management setting is not responding.
- The sound of my notebook’s fan is too loud.
- Why does the System Properties dialog box display a slower CPU speed than advertised?
- Troubleshooting the LCD Screen
- Troubleshooting the Mouse and Touchpad
- Troubleshooting Drives, PC Cards, and Peripheral Devices
- I cannot establish a connection between two VAIO® computers when using an i.LINK cable.
- My floppy disk drive (optional) cannot write to a floppy disk.
- My optical disc drive is not playing my CD or DVD properly.
- My optical drive tray does not open.
- I cannot use Digital Video (DV) devices. The message “DV equipment seems to be disconnected or tu...
- My PC Card is not working.
- Troubleshooting Software
- My software program stops responding or crashes.
- When I click an application icon, the message “You must insert the application CD into your optic...
- What software do I use for CD-R/CD-RW software functions?
- Why is my computer operating improperly after downloading the CD-burning feature of RealJukebox® ...
- I cannot use the DVgate™ software.
- Troubleshooting the Modem
- Troubleshooting Audio
- Troubleshooting the Printer
- Troubleshooting Wireless LAN
- Troubleshooting Your Notebook
- Getting Help
- Index
Change text in this variable definition to document title.
30
Using PC Cards
Your notebook includ es tw o PC Card slots. PC Cards enable you to connect
portable external devices such as another hard disk drive, or a PC Network
Interface Card (NIC) to connect to a network.
To insert a PC Card
1 Insert the PC Card int o the PC Card slot. Make sure the front label o f the PC
Card is facing up.
2 Push the PC Card gently into the slot. The PC Card is automatically detected
by your system. The Unplug or Eject Hardware icon appears in the
taskbar.
Do not strike or shake the notebook while writing data to a disc.
Always use the AC adapter as the power source for your notebook if you are
writing data to a CD-RW or CD-R disc. Using battery power may result in data
transfer failure.
✍ The PC Card slots can accommodate two Type I/II PC Cards, or one Type III PC Card.
These slots are compatible with CardBus. Use the lower slot for Type III PC Cards. You
do not need to shut down your notebook before inserting or removing a PC Card.
Inserting a PC Card