Operating Instructions

9
• Channel configuration supported in combination with
the UWP-D series equipped with an infrared
communication function
• Output level control for receiver
• Equipped with output mode with wide range of output
le
vel settings
• High visibility OLED display for indoor/outdoor use
• USB for power supply
• Digital audio interface support using SMAD-P5 multi-
i
nterface shoe-mount adaptor (option)*
* For details on cameras that support this function, visit
t
he Sony website.
Name and Function of
Parts
Body-pack transmitter (UTX-B40)
a Antenna
b POW
ER indicator
Displays the battery level.
c AUDIO (a
udio input level) indicator
Turns on or off according to the audio input level as
fo
llows.
On (red):
Audio input level is too high. If the sound is
distorted, adjust the attenuation level to decrease the
audio input level (page 41).
On (green): Audi
o input level is appropriate.
Off: Th
ere is no audio input or the input level is too low.
Flashing (orange): Audi
o is muted (i.e., disabled).
d Aud
io input connector (BMP type)
Connect to the supplied lavalier microphone.
• When the audio input level is set to MIC, a voltage for
t
he lavalier microphone power supply is applied to the
audio input connector. Special electrical wiring is used
inside the audio input connector for this purpose.
Indicator display Status
On (green) Sufficient battery level
Flashing (green) Battery is getting low
Off Supply OFF
Notes