Operating Instructions

19
Hand-held microphone (UTX-M40)
1 Press and hold the POWER/MUTE button or
POWER button to turn the power off.
The button used to turn off power varies depending
on
the POWER/MUTE setting.
For details, see “Setting the operation of the audio
muting function (POWER/MUTE) (UTX-M40 only)”
(page 42).
2 Turn the grip in the direction of the arrow, and pull
the grip down until the battery compartment is
visible.
3 Insert two new AA batteries into the battery
compartment with 3 and # polarities in the correct
orientation.
4 Close the grip, turning it in the reverse direction of
step 2.
Plug-on transmitter (UTX-P40)
1 Press and hold the POWER button to turn the power
off.
2 Turn the battery compartment knob counterclockwise
to open the cover.
3 Insert two new AA batteries into the battery
compartment with 3 and # polarities in the correct
orientation.
4 Close the battery compartment cover and turn the
knob clockwise to lock the cover.
Check that the cover is fully closed before tightening
t
he knob.
Battery level indicator
Turning the power on will display the battery level on the
display.
Immediately replace both batteries with new batteries if
th
e indicator starts flashing (indication 5 below). If using
new alkaline batteries, use after checking the
recommended time limits.
• When BATTERY TYPE is set to TYPE1, the battery
l
evel is indicated based on the use of new LR6 (size
AA) alkaline batteries from a specific manufacturer.
Note
Locked Unlocked
Battery level
indicator
Battery status
1 Lights Good
2 Lights Less than about 70% charge
remaining
3 Lights Less than about 40% charge
rem
aining
4 Lights Less than about 20% charge
rem
aining
5 Flashes Almost empty
Notes