Operating Instructions

10
• If a lavalier microphone other than the one supplied is
connected, the proper performance may not be
obtained.
e D
isplay section
A RF
transmission indicator
Displays the current t
ransmission status.
B RF
transmission power indicator
Indicates the current transmission power setting. You can
c
hange the setting with the RF transmission power setting
function.
For details on the RF transmission power setting
f
unction, see “Setting the transmit output level (RF
POWER)” (page 42).
C Au
dio input level meter
Displays the audio input level.
D Pe
ak indicator
Lights up when the signal is 3 dB below the level at which
di
stortion begins as a warning of excessive input level.
E I
nput level indicator
Displays the input level status.
: M
icrophone input
: Li
ne input
F M
uting status indicator
Displays an icon when the muting function is on.
For details about the muting function, see “Setting the
operation of the audio muting function (MUTE
SETTING) (UTX-B40/P40 only)” (page 42).
G Ba
ttery level indicator
Displays the battery level. “USB” is displayed when
po
wer is supplied from the USB connector.
For details, see “Battery level indicator” (page 19).
H M
enu display section
Displays various functions. Press the + or – button to
swi
tch functions.
For details, see “Configuration menu” (page 41).
I G
ain mode indicator
Displays the gain mode setting.
For details, see “Setting the audio gain (GAIN MODE)”
(page 41).
f +
or – button
Selects functions or values shown on the display.
g Infr
ared detector
Receives the frequency and compander mode set on the
tu
ner.
h N-Ma
rk
Receives the frequency and compander mode set on the
t
uner. It also notifies the tuner about the frequency and
compander mode set on the transmitter.
i B
attery compartment
Accepts two AA batteries (alkaline, nickel metal hydride,
o
r lithium dry cell batteries).
For details on how to insert batteries, see “Power
Supply” (page 18).
j MU
TE button
Turns the muting function on/off. You can change the
mut
ing function on/off control method in the
configuration menu.
For details about switching the muting function on/off,
see “Setting the operation of the audio muting function
(MUTE SETTING) (UTX-B40/P40 only)” (page 42).
k SET
button
Adjusts displayed function settings and enters the
di
splayed value.
Holding down the SET button while turning on the power
t
urns the transmitter on without transmitting a signal
(transmission stopped mode).
l USB
connector (USB Type-C
®
)
Connect to a commercially available USB portable power
suppl
y.
When a USB portable power supply is connected while
t
he power is turned on, the unit automatically operates
with power supplied by the USB portable power supply.
m POW
ER button
Turns the power on/off.
: Transmitting
– : T
ransmission stopped
Function Operation
Supply ON Press button for one second or
lo
nger
Supply OFF Press button until the indicator turns
of
f