Printer User Manual

Setting the Bluetooth Functions
55
7 Press b or B of the control button to select a digit
of the passkey to be changed.
This <1> shows the leftmost digit, and <4> shows
the rightmost digit.
8 Press v or V of the control button to set the value
of the passkey.
A value from 0 to 9 can be used.
Repeat Steps 7 and 8 until the four-digit passkey is
set.
9 Press the EXEC button.
“PASSKEY INPUT Saving...” appears, and your
passkey setting is stored.
10 When the setting is completed, press the MENU
button.
Setting the Module Power
The Bluetooth Module Power must be set to ON to
connect the camera and the printer using the Bluetooth
function. If it is set to OFF, Bluetooth connection
between devices is not possible.
Changing the setting for Module Power of
the camera
1 Display the SETUP menu.
For details, see “Displaying the SETUP Menu” on
page 28.
2 Press v or V of the control button to select
Bluetooth.
3 Press the ENTER button.
The Bluetooth Menu display appears.
4 Press v or V of the control button to select
MODULE.
5 Press the ENTER button.
The BT MODULE POWER display appears.
6 Confirm that either ON or OFF is selected, then
Press the ENTER button.
The display returns to Bluetooth Menu.
When the module power for the camera is set to ON, the
(Bluetooth) icon appears at the top left of the LCD to
the right of the power indicator.
Changing the setting for Module Power of
the printer
1 Turn on the printer.
2 Press the MENU button.
3 Press V of the control button to display “Bluetooth
SETTING [>>].”
4 Press B of the control button.
“Bluetooth ADDR” appears.
5 Press V of the control button to display “MODULE
POWER [>>].”
6 Press B of the control button.
7 Press b or B of the control button to select ON or
OFF.
8 Press the EXEC button.
If the Module Power setting of the printer is changed
from ON to OFF, the Bluetooth lamp goes off, and
“Ready” is displayed on the operation display of the
printer. The camera treats this printer in the same way as
one whose printer name and Bluetooth address are
displayed in gray.
If the Module Power setting of the printer is changed
from OFF to ON, “REBOOTING” is displayed on the
operation display, and the printer restarts. After the
printer restarts, the Bluetooth lamp lights, and “Ready
BT RSSI [----]” is displayed on the operation display. To
connect to the camera, press the PRINT button on the
camera and reestablish connection.