2-699-392-11 (1) Printer Driver Installation Guide This guide describes installation and use of the Printer Drivers for Windows XP and Windows 2000. Before Using this Software Before using the printer driver, be sure to read the “ReadMe” file located on the CD-ROM.
Windows 2000 Table of Contents Operation Environment Requirements ................3 About This Document ............................................3 Installing the Printer Driver .................................4 Before Installation ..............................................4 Printer Driver Installation Under Windows XP ..5 Printer Driver Installation Under Windows 2000 ....................................................................6 Uninstalling the Printer Driver .............................
Windows 2000 Operation Environment Requirements The system requirements for use of the printer driver are as follows. • Computer running Microsoft Windows XP Professional/Home Edition or • Computer running Microsoft Windows 2000 Professional About USB 2.0 • The UP-CX1 series conforms to USB 2.0 specifications. • USB 2.0 is fully backward compatible with USB 1.1. • USB 2.0 supports conventional Full (low) speed and Hi-Speed operation. • In a USB 1.
Windows 2000 Installing the Printer Driver Before Installation About version upgrades About Driver Signing Options The present printer driver has not passed Windows Logo testing, therefore when you install the driver an error message may appear, preventing you from installing the driver. In the [Driver Signing Options] dialog box, select [Ignore] or [Warn] in the [What action do you want Windows to take?] group box. If you select [Block], you cannot install the printer driver.
Windows 2000 Printer Driver Installation Under Windows XP 1 Connect the UP-CX1 series printer (one only) for which the driver is to be installed to the computer. 2 Turn power to the connected UP-CX1 series printer on. 3 Turn power to the computer on, and log on as the system administrator or a member of the Administrators group. 4 Click [No, not this time] and click [Next]. 5 Select [Install from a list or specific location (Advanced)], and then click [Next].
Windows 2000 8 If the [Found New Hardware Wizard] does not appear Perform the steps described below, with the UPCX1 series printer for which the printer driver is to be installed turned on and connected to the computer. (Any other USB printers or previously installed UP-CX1 series printers should not be connected at this time.) 1 Click [Start], select [Settings], and select [Control Panel]. 2 Double-click [System]. The [System Properties] window opens. 3 Click the [Hardware] tab. 4 Click [Device Manager].
Windows 2000 5 Select [Search for a suitable driver...] and then click [Next]. 8 Click [Next]. The screen changes as follows. If the [Digital Signature Not Found] dialog box appears, click [Yes]. The screen changes as follows. 6 Select [CD-ROM drives], and then insert the supplied CD-ROM “PRINTER DRIVER & INSTRUCTIONS FOR USE UP-CX1” into the CD-ROM drive. 7 Click [Next]. The screen changes as follows. 9 Click [Finish]. 10 Restart the computer.
Windows 2000 4 Uninstalling the Printer Driver From [Currently installed programs], select [Sony UP-CX1 Series Printer Driver], and then click [Change/Remove]. The following dialog box appears. This section describes how to remove the printer driver. Notes • When starting the uninstallation procedure, the printer should not be connected to the computer.
Windows 2000 Configuring the Printer Before printing from an application, you should make the required printer properties settings. To call up the printer properties window, use one of the following methods. • Click [Start] and then [Control Panel]. Select [Printers and Faxes]. (Under Windows 2000, click [Start], select [Settings], and click [Printers].) Select the Sony UP-CX1 series printer icon, then click [Printing Preferences] on the [File] menu.
Windows 2000 [Graphics] Tab This tab is used for making color, brightness, and other image related settings. From the [Color Adjust] combo box, you can select [Digital Camera Correction], [Color Balance], or [Lightness], and make the respective settings. Color Balance Select [Color Balance] from the [Color Adjust] combo box. Digital Camera Correction Select [Digital Camera Correction] from the [Color Adjust] combo box. Adjust the items by moving the respective sliders left or right.
