UNI-ONER / EP Series Cameras

Wrap Teflon tape around the pipe threads
to ensure a tight seal.
La cinta del Teflon del abrigo alrededor de la pipa rosca
para asegurar un sello apretado.
La bande de teflon d'enveloppe autour de la pipe filète
pour assurer un joint serré.
Verpackung Teflonklebeband um das Rohr verlegt, um
eine feste Dichtung sicherzustellen.
A fita adesiva do Teflon do envoltório em torno da
tubulação enfía para assegurar um selo apertado.
Il nastro del Teflon dell'involucro intorno al tubo filetta per
accertare una guarnizione stretta.
TM
Screw the coupling onto the pipe threads
until it is hand tight.
Atornille el acoplador sobre los hilos de rosca de la pipa
hasta que es mano firmemente.
Vissez le couplage sur les fils de pipe jusqu'à ce que ce soit
main fortement.
Schrauben Sie die Koppelung auf die Rohrgewinde, bis es
Hand fest ist.
Parafuse o acoplamento nas linhas da tubulação até que
esteja mão firmemente.
Avviti l'accoppiamento sui filetti del tubo fino a che non sia
fortemente mano.
Mounting Preparation
Screw the (2) bolts into the coupling.
Atornille (2) los pernos en el acoplador.
Vissez (2) les boulons dans l'accouplement.
Schrauben Sie die (2) Schraubbolzen in die Koppelung.
Parafuse (2) os parafusos no acoplamento.
Avviti (2) i bulloni nell'accoppiamento.
Securely attach pendant pipe or the UNI-WMB1
(See block 9 when using UNI-WMB3). Pull wiring
through pipe and position grommet as shown.
Con seguridad pipa pendiente de la fijación o el UNI-WMB1 (véase el bloque 9
para UNI-WMB3). Tire del cableado a través de la pipa y del ojal
de la posición como se muestra.
Solidement pipe pendante d'attache ou l'UNI-WMB1 (voir le bloc 9 pour
UNI-WMB3). Tirez le câblage par la pipe et le canon isolant de position comme
montré.
Sicher hängendes Rohr der Befestigungs oder das UNI-WMB1
(sehen Sie Block 9 für UNI-WMB3). Ziehen Sie Verdrahtung durch Rohr und
Positionsgummimuffe wie gezeigt.
Firmemente tubulação do pendente do anexo ou o UNI-WMB1 (veja o
bloco 9 para UNI-WMB3). Puxe a fiação através da tubulação e do ilhó
da posição como mostrado.
Saldamente tubo del pendente dell'attaccatura o il UNI-WMB1 (vedi il blocco
9 per UNI-WMB3). Tiri i collegamenti tramite il tubo ed il gommino di protezione
di posizione come indicato.
1
3
2
4