Owner's Manual

22
•
[TV Screen Size Setting
for
30]
Sets
the
screen size
of
your 3D-compatible
TV
.
• [TV Type]
[16:9]:
Select this when connecting
to
a wide-
screen
TV
or a
TV
with a wide mode function.
[4:3]:
Select
this when connecting
to
a 4:3
screen
TV
without
a wide mode function.
•
[Screen Format]
[Full]: Select
this when connecting
to
a
TV
with a wide mode function.
Displays
a 4:3
screen picture in 16:9 aspect ratio even on a
wide-screen
TV.
[Normal]: Changes
the picture
size
to
fit
the
screen size
with
the
original
picture aspect
ratio.
•
[DVD Aspect Ratio]
[Letter Box]:
Displays
a wide picture
with
black
bands on the
top
and
bottom.
[Pan
&
Scan]: Displays
a
full-height
picture on
the entire screen, with
trimmed
sides.
•
(Cinema Conversion
Mode]
[Auto]:
Normally select
this. The
player
automatically detects
whether
the material
is
video-based or film-based, and switches
to
the appropriate conversion method.
[Video]: The conversion
method
suited
for
video-based
material will always
be selected
regardless
of
the
material.
• [Pause
Mode]
[Auto]: Normally select this. Dynamic moving
pictures appear
without
blurring.
[Frame]:
Displays static pictures
at
high
resolution.
-4
,)
[Audio
Settings]
•
[Digital
Audio
Output]
[Auto]:
Normally select
this. Outputs
audio
signals
according
to
the status
of
the
connected devices.
[PCM]: Outputs
PCM
signals
from
the
DIGITAL
OUT
{COAXIAL)/HDMI
OUT
jack.
Select
this
if
there
is
no
output
from
the connected device.
•
[DSD
Output
Mode]
[Auto]:
Outputs
DSD
signal
from
HDMI
OUT
jack when
playing Super
Audio
CD
&
DSD
format
file
{if
the connected device
also
supports
DSD
).
Outputs
LPCM
signal
from
HDMI
OUT
jack
when
playing Super
Audio
CD
&
DSD
format
file
{if
the connected device does
not
support
DSD).
.
[Off]: Outputs
PCM
signals
from
HDMI
OUT
jack when
playing Super
Audio
CD
and
DSD
format
file.
• [BD Secondary
Audio]
[On]: Outputs the audio obtained by mixing
the interactive and secondary audio
to
the
primary audio.
[Off]: Outputs
the primary audio
only. Select
this
to
output
Bitstream
(Dolby/DTS) signals
to
an
AV
amplifier
(receiver).
~~*
To
enjoy Bitstream (Dolby/DTS) signals,
set
[BD
Secondary Audio] to
[Off]
and
[Digital
Audio
Output] to [Auto].
•
[Digital
Music Enhancer]
[On]: Set
the sound effect when
playing
Internet
content or
USB
content.
[Off]/[
Sound Bar Mode]: Turns
off
the
function .
•
[DTS
Neo:6]
[Cinema]/[Music]:
Outputs
the
simulated
multi-channel
sound
from
2
channel
sources
via the
HDMI
OUT
jack according
to
the
capability
of
the connected device using
[ Cinema]/[Music] mode.
[Off]: Outputs
the sound
with
its original
number
of
channels
via the
HDMI
OUT
jack.
"
When
[DTS
Neo:6]
is
set to
[Cinema]
or [Music],
[Digital
Music Enhancer]
is
not
available.