4-291-689-11 (1) HD Camera Control Unit The supplied CD-ROM includes operating instructions for the HXCU-D70 HD Camera Control Unit (Japanese, English, French, German, Italian, Spanish and Chinese versions) in PDF format. For more details, see “Using the CD-ROM Manual” on page 7. Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference.
Owner’s Record For kundene i Norge Dette utstyret kan kobles til et IT-strømfordelingssystem. The model and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
For the customers in Europe Pour les clients en Europe The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
Wenn Sie Fragen zur Verwendung von Netzkabel/ Geräteanschluss/Stecker haben, wenden Sie sich bitte an qualifiziertes Kundendienstpersonal. Für Kunden in Europa Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die EMV-Richtlinie der EG-Kommission. Angewandte Normen: • EN55103-1: Elektromagnetische Verträglichkeit (Störaussendung) • EN55103-2: Elektromagnetische Verträglichkeit (Störfestigkeit) Für die folgende elektromagnetische Umgebung: E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).
Table of Contents Overview .................................................................... 6 Features .......................................................................... 6 System Configuration Example ...................................... 7 Using the CD-ROM Manual ............................................ 7 Preparations .............................................................. 8 Area Settings ..................................................................
Overview The HXCU-D70 Camera Control Unit (CCU) connects to the Sony HXC-D70 HD Color Camera. It performs signal processing, provides an interface for external equipment, and supplies power to the camera. The CCU can be combined with an RCP-1000-series Remote Control Panel (optional) to form a camera control system.
System Configuration Example DXF-20W/C50WA/51 Viewfinder Picture Monitor Microphone CBK-VF01 Viewfinder Return Video Input Intercom Headset HXC-D70 HD Color Camera Sync Input Zoom Lens (for ENG/EFP) Multi-Core Cable1) HXCU-D70 Camera Control Unit “Memory Stick Duo” VCT-14/U14 Tripod Adaptor Prompter Video Input HD-SDI/SD-SDI/VBS/ HDMI Video Outputs AC Power CCA-5 Cable/LAN Cable Tripod for Portable Camera RCP-1000-series Remote Control Panel 1) An equivalent cable length of up to 100 m is appro
“- - - - ” appears in the SHUTTER display five seconds after setting. Area settings are stored and the units switches to normal mode. Preparations CABLE COMPENSATION Settings Area Settings There is no default area setting. Set the area where you intend to use this unit first. You can set cable compensation according to the multi-core cable length between the camera and CCU. A built-in cable compensation circuit compensates for the frequency losses in the cable.
Locations and Functions of Parts Front Panel ab CABLE ALARM OPEN c d INTERCOM MIC-ON MENU PROD DISP CANCEL e f gh PANEL ACTIVE i SHUTTER ECS SW1 BARS SW2 j k MASTER GAIN ALARM STANDARD UP UP DOWN DOWN AUTO CAM POWER ON OFF PGM ENG MENU ENTER IRIS/MB ACTIVE IRIS POWER LOCK ON CONTROL CUSTOM ATW PRESET CALL WHITE WHITE BLACK/FLARE MASTER BLACK EXT AUTO BLACK OFF NETWORK HD CAMERA CONTROL UNIT HXCU-D70 l mn o a Tally light Turns on red to indicate a red tally signal
e PANEL ACTIVE button Activates the control panel to control the camera connected to the CCU (panel active state). When the button is lit, the IRIS/MB ACTIVE indicator also turns on simultaneously. When the button is not lit, the panel is deactivated (panel lock state) to prevent inadvertent operation. f SW1, SW2 (assignable switch 1, 2) buttons Controls the function assigned to each button on the page in the CCU CONFIGURATION menu.
q CUSTOM (custom volume) knob Controls the function assigned to the knob on the page in the CCU CONFIGURATION menu. Turning the knob adjusts the assigned function. u IRIS/MASTER BLACK adjustment control block MASTER BLACK (master black adjustment) knob EXT (lens extender) indicator See “VOLUME” on on page 27 and “CUSTOM” on on page 28.
Rear Panel a b c d REMOTE Pr/R/R-Y Y/G/Y e Pb/B/B-Y 1 f VBS RETURN 2 IN g CAMERA IN AUDIO OUTPUT CH-2 CH-1 h ~ AC IN PRO REFERENCE PROMPTER IN OUT IN OUT S-VIDEO VBS1 OUTPUT HDMI OUTPUT ij klm 1 VBS2 PIX SYNC OUT 2 SDI OUTPUT 3 4 no p a “Memory Stick” slot For service use only. b LAN jack (RJ-45, 8-pin) Connects to a LAN hub (10BASE-T/100BASE-TX), when using a network connection, via a LAN cable (shielded type, category 5 or higher).
o PIX (picture monitor output) connector (BNC type) Outputs a video signal for a picture monitor. It can also output a signal with superimposed character display. p SYNC (sync signal output) connector Outputs a sync signal for connection to the sync signal input connector of a waveform monitor or picture monitor. q INTERCOM/TALLY/PGM (intercom/tally/program audio) connector (D-sub 25-pin) Transmits and receives the various intercom, tally, and program audio signals.
Camera settings Status Display The CCU system status can be monitored using a picture monitor connected to the PIX output. Page 1 a b c 6dB 1/2000 OFF d For information on monitoring and changing settings, see “Setup Menu” on page 17. Displaying the Status Screen The status screen is controlled using the knob and levers in the MENU control block on the front panel. DISP/MENU lever and indicator MENU DISP MENU ND:1 F:4.
System status *S y s t e m S t a t u s * Page 2 1/13 *System Diag 2/3* HX C - D 7 0 1 0 8 0/59.94I Re f e r e n c e : F r e e Lock CAMERA SD I - 1 / 2 : 1 0 8 0 /59.94I SD I - 3 / 4 : 5 2 5 / 59.94I Co m p o n e n t : S D Y CD REMOTE The camera model name and signal format are displayed at the top of the page (a “-” mark is displayed instead when a camera is not connected).
Page 2 *N e t w o r k D i a g 2/3* 7/13 CN S M o d e : BRIGDE CC U N o . :1 PLD DE-MUX: DEMUX-PLD version PLD SY: SY-PLD version PLD POST: POST-PLD version PLD HDMI: HDMI-PLD version IIC: IIC bus control status DPR POWER: DPR board power supply status Front panel diagnostics *Front Panel Diag* 11/13 CNS Mode: REMOTE and LAN connectors mode setting CCU No.
To change the displayed page Setup Menu 1 Turn the CONTROL knob to move the pointer (,) to the page number, then press the CONTROL knob. The pointer (,) changes to a flashing question mark (?). The CCU system and peripheral settings can be checked and modified using a picture monitor connected to the PIX output.
To enter a character string Some menu items require a character string input. Moving the pointer (,) to an item with a character string input and pressing the CONTROL knob displays a rectangular cursor and a list of selectable characters. Turning the CONTROL knob moves the cursor between characters. The following menu item has character strings: • CCU CONFIGURATION menu → page → BAR CHARACTER 1 2 3 Move the text cursor to the input position, then press the CONTROL knob.
Menu Tree SYSTEM OPERATION menu OUTPUT SELECT GENLOCK PHASE MULTI FORMAT OUTPUT FORMAT SD ASPECT OUTPUT PIX REFERENCE GENLOCK H STEP COARSE SC PHASE V PHASE SYNC OUT FREQUENCY CAMERA FORMAT SLOT NO 1- 1&2 3&4 HDMI COMPONENT SD ASPECT SD LB SEL H POSITION CENTER V POSITION CENTER H INTERP V INTERP CCU CONFIGURATION menu COLOR BAR BAR CHARACTER MONITOR 1 MONITOR 2 MIC/AUDIO INTERCOM FRONT INCOM VIDEO SETUP VIDEO ADJUST MENU SETTINGS HD BAR SEL MF CB SLOPE SD BAR BAR CHARA GRAY BAR CHARACATER ALL
DISPLAY DATE OTHERS FRONT PANEL 1 FRONT PANEL 2 FRONT PANEL 3 MESSAGE ALARM JUMP MASTER GAIN ECS/SHUTTER ND FILTER IRIS EXTENDER DATE/TIME TIME ZONE REAR PREVIEW CABLE COMP ASSIGNABLE/CUSTOM SW1 SW2 VOLUME VOLUME MODE IRIS M BLACK R/B BLACK R/B WHITE VOLUME REL COEFF IRIS M BLACK R/B BLACK R/B WHITE CUSTOM SW BRIGHT LOCK TARGET NETWORK SETTINGS menu TCP/IP SETTING LAN SETTINGS CNS SETTINGS NETWORK RESET 20 Setup Menu IP ADDRESS SUBNET MASK DEFAULT GATEWAY SET AUTO NEGOTIATION CONNECTION SPEED DUPL
Menu List Note The following conventions are used in the menu list table. Settings column values (e.g. ON, OFF, 0): Default settings Execute by ENTER: Press the CONTROL knob or move the CANCEL/ENTER lever to the ENTER position to execute. SYSTEM OPERATION menu SYSTEM OPERATION Page name Page No. Item Settings
SYSTEM OPERATION Page name Page No. Item
CCU CONFIGURATION menu CCU CONFIGURATION Page name Page No.
CCU CONFIGURATION Page name Page No.
CCU CONFIGURATION Page name Page No.
CCU CONFIGURATION Page name Page No.
CCU CONFIGURATION Page name Page No.
CCU CONFIGURATION Page name Page No.
CCU CONFIGURATION Page name Page No. Item Settings Description (LOCK TARGET) AWB: ON, OFF Allows you to specify buttons on the front panel to be locked. ABB: ON, OFF C16 ATW: ON, OFF BARS: ON, OFF CALL: ON, OFF PANEL: ON, OFF A-SW1: ON, OFF A-SW2: ON, OFF INCOM: ON, OFF STANDARD: ON, OFF IRIS AT: ON, OFF SHUT-ECS: ON, OFF SHUT: ON, OFF GAIN-U/D: ON, OFF SHUT-U/D: ON, OFF PRST WHT: ON, OFF VOLUME: ON, OFF MENU: ON, OFF NETWORK SETTINGS menu NETWORK SETTINGS Page name Page No.
NETWORK SETTINGS Page name Page No. Item Settings Description CNS MODE LEGACY, BRIDGE Network connection mode selection N03 LEGACY: External controller connected using CCA-5 cable only BRIDGE: External controller connected using point-to-point LAN cable CCU NO N04 ALL RESET 0 to 96, A to Z CCU number settings A “NET SETTINGS RESET OK?” message is displayed. Press ENTER again to reset NETWORK SETTINGS menu items to factory default values.
Appendix Notes on Use Use and storage locations Avoid using or storing the unit in the following places: • Where it is subject to extremes of temperature (operating temperature: 5 °C to 40 °C (41 °F to 104 °F)). Note that in summer the temperature in a car with the windows closed can reach 50 °C (122 °F). • Very damp or dusty places. • Where rain is likely to reach the unit. • Places subject to severe vibration. • Near strong magnetic fields. • Near transmitting stations generating strong radio waves.
Error message Indication CCU: AT NG Front AT board power supply, PLD error CCU:RX WARNING Transmission losses between camera and CCU or disapproved cable length for compensation Pr/R/R-Y, Y/G/Y, Pb/B/B-Y • HD component video Y (100% white): 0.7 Vp-p Pr/Pb (75% color bar): 0.7 Vp-p, 75 Ω • HD RGB video R/G/B (100% white): 0.7 Vp-p, 75 Ω • SD RGB video R/G/B (100% white): 0.7 Vp-p, 75 Ω Specifications • SD component video Y (100% white): 0.714 Vp-p HXCU-D70 Pr/Pb (75% color bar): 0.
Pin assignment Dimensions INTERCOM 5 1 395 (15 5/8) 4 3 2 CABLE ALARM OPEN INTERCOM MIC-ON MENU PROD DISP CANCEL PANEL ACTIVE SHUTTER ECS SW1 SW2 BARS UP UP ON OFF ENG MENU ENTER DOWN DOWN POWER LOCK ON IRIS/MB ACTIVE Signal Specifications 1 INTERCOM MIC IN (Y)/ (GND)* -20 dBu (CARBON) 2 INTERCOM MIC IN (X) -60 dBu IRIS 66 (2 5/8) 3 GND 4 INTERCOM L OUT 482 (19) 5 INTERCOM R OUT CUSTOM ATW PRESET WHITE CALL WHITE BLACK/FLARE MASTER BLACK EXT AUTO NETWOR
No. Signal Specifications 22 R-TALLY OUT 23 G-TALLY OUT OPEN COLLECTOR (Max. 30 mA) 24 G TALLY (X) IN ON: SHORT G TALLY (G) IN OFF: OPEN 25 TRUNK 5 1 9 6 - EXT VIEW - 34 No.
Sony Corporation Printed in Japan
