Modem User Manual

USB 598 USB - User Guide
30 2131141
TheConnectbu tton isavailable;thesignalstrengthicon
(),coverageindicator(),andtheroamingicon
()arevisible.
Toconnecttothenetwork,clickthe
Connectbutton.
Connecting
Watcherisestablishingaconnectiontothenetwork.
Connected
Theconnectionisestablished.Inadditiontothesignalstrength
icon(),coverageindicator(),androamingicon
(),theamountoftimeyou’vebeenconnectedandthe
amountofdatareceived(Rx)andtransmitted(Tx)arealso
displayed.(Seethe
noteonpage 32.)
Toendtheconnection,click
Disconnect.
Call Dormant
Youareconnectedtothenetwork,butthereiscurrentlyno
traffic.
Device is Locked
Themodemislocked,sothatotherscannotusethemodem
andyouraccount.Tousemostofthefeatures,youmust
unlockthemodem(page 36).
Device is powered OFF
Themodemispoweredoff.Formoreinformation,see
“Poweringthe
modemoff”onpage 36.
Determining the type of coverage
AniconinWatcher()indicatesthetypeofcoverageyou
have(forexample,1X[synonymof1xRTT]or1xEV‐DO).See
thetableonpage 28.