To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the customers in the United States A This symbol is intended to alert the user o the presence of insulated “dangerous voltage™ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. A “This symbol is intended 1o alert the user 10 the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Welcome! Thank you for purchasing the Sony Stereo Cassette Deck. Before operating, the unit, please read this manual thoroughly and retain it for future reference. R About This Manual “The instructions in this manual are for ‘models TC-WE403, TC-Wren and WRISTWATCH. Check your model numbness by Rooking at the rear panel of yous tape deck. fn this manual, the TC-EELS s the molded used for illustration ‘purposes. Any difference in operation is clearly indicated in the text, for example, “TC-WE405 only.
Getting Started Unpacking Check that you received the following it eras + Audio connecting cords (2) Hooking Up the System This section describes how to hook up the tape deck to an amplifier, Be sure to hum off the power of each component before making the connections.
Playing a Tape 2 4 * IEEE page 4 for hookup information “ You can use either deck for playback. G o locate the beginning of a tape and start playback automatically (Auto Play) Press 4 while holding down B2 For the reverse chicle, press 9 while holding down <2, To play a tape recorded with the Dolby NR* system Set DOLBY NR to the same: position that the tape was recorded in---B or .
Basic Operations Recording on a Tape 2 SONY See page 4 for hookup information. * Use deck B (on your right hand side} for recording. + See “Subbing a Tape” {page 9) to make a copy of the tape. Note When deck B is recording or in recording pause, all buttons on deck A do not work. Turn on the amplifier and play the program source you want to record. Press POWER, and then press 2 and insert a cassette into deck B. With the side you want to record . facing you Set DIRECTION.
B 7o protect recordings against accidental erasure Break out the record-protect tabs) (see page 11} & The Dolby nx prO system automatically quarks during recording {TC.WESDS only} Distortion and noise in the high-frequency response are seduced to produce high quality sound that can be enjoyed even during playback on other tape decks. “ HX Pro headroom extension originated by Bang & Olsen and manufactured sander license from Dolby Laboratories Licensing Corporation.
Advanced Recording Operations R Adjusting the Recording Level Automatically (Auto Rec Level) Fhe Auto Rec Level function automatically measures the peak signal level and adjusts the recording level accordingly. PAUSE REC# Follow Steps 110 3 of “Recording on a Tape” on page 6. Make sure that record-protect tabs on the cassette have not been removed. 2 PressREC®. The AUTO indicator flashes and the deck automatically adjusts the recording level.
Advanced Recording Operations Fading In and Out (Wader) You can gradually increase the recording level at the beginning of a recording (fade in) ar gradually decrease the recording level at the end of recording (fade out) Iris convenient to use this function, for example, when the tape reaches to its end and you dotcom want the track robe cut off abruptly. You can do fade in or out recording only when you have adjusted the recording level manually (see page 7).
Advanced Recording Operations % During high-speed dubbing Only W is operative. & You don't have to adjust the recording feel or select the Dolby NR system during dubbing Dubbing is automatically performed with the same recording level and Dolby NR shyster as the original in dock A, If, however, you want to monitor the sound Goering normal-speed dubbing, set DOLBY NR to match the tape in deck A (see page 5). Note Ha TV set is placed near the tape deck, noise may occur during high-speed dubbing.
Additional Information 0 Precautions On safety « Do not disassemble the cabinet — this may result in an electrical shock. Refer servicing to qualified personnel only. « Should any solid object or liquid fall into the cabinet, unplug the tape deck and have it checked by qualified personnel before operating it any fustier. On power sources * Before operating the tape deck, check that the operating voltage of the tape deck is identical with your local parer supply.
Additional information Cleaning Head assembly of deck B Cleaning the heads and tape path Clean the heads and tape path of the tape deck after every 10 hours of operation to grad against: « Joe-quality sound a decrease in sound level * excessive wow or flutter + sound dropout « incomplete erasure » impairment of recording function To ensue better recording, we recommend that you clear: the heads and tape path before every recording. 1 Press € to pane the cassette holder.
Additional Information Troubleshooting 1 you've experienced any of the following difficulties while using the tape deck, use this troubleshooting guide to help you remedy the problem. Should the problem persist, consult your nearest Sony dealer. ‘The function buttons do not quark. b The tape deck has been just furred on and does ot operate for about 3 seconds. Wait anti B stops flashing.
Specifications System Re carding system 4-track 2-channel stern Fast winding time (apron) 180 sex. {with Sony C-60 cassette) sis AC bias Signal-to-noise ratio (at peak level and weighted with Dolby NR off) Type Tape, Sony Type | (NORMAL: S5 dB Type il tape, Sony Type 1l (HIGH): 57 dB Type IV tape. Sony Type IV (METAL}: 58 dB Sill ratio improvement {approximate values) With Dolby BNR orv 5.dB at 1 kHz, kHz With Daley CNR 500 Shamanic distortion 0.
Index AB Adjusting recording level automatically. See Alta rec revel recording level manually 7 volume 5 Audio connecting cord 4, 14 Auto play 5 Auto rec level 8 o Cassette, Sez Tape Cleaning cabinet 11 heads and tape path 12 Connecting. See Hooking uip DEF G Dolby HX PRO system 7 Dolby NR system 5, 7 Dubbing high-speed dubbing 9 normal-speed dubbing 9, 10 only specific portions 10 Wader 9 Fading f0. See Wader out.
