Manual

Playing a Tape
2
i_iI ]!! E__ -1 !
4 3
• See "Hooking Up the
System • for hookup
information.
• You can use either deck for
playback.
"_" To play a tape recorded
with the Dolby NR system
Set DOLBY NR to ON.
Turn on the amplifier and select the tape deck position.
Press POWER, and then press I1_
and insert a cassette.
With the side you want to play
facing you
Set TAPE TYPE on the deck you use.
When the tape type
you use is
Set TAPE TYPE on
DECK A to DECK B to
TYPE I TYPE I TYPE 1
TYPE II TYPE II/IV TYPE II
TYPE IV TYPE If/IV TYPE IV
Press E::>-.
The deck starts playing. Adjust the volume on the amplifier.
Do not press POWER or I_ while the tape deck is
operating. If you do so, the tape may be damaged.
To Press
Stop playing II--_
Pause PAUSE II. P_ss the button again to
resume play.
Fast-forward or rewind _ or'<1"11when the deck is stopped
Take out the cassette I1_ after stopping playing
5