Manual

Recording on a Tape
2 5
J
........ In
3 4 6
• See "Hooking Up the
System • for hookup
information.
• Use deck g (on your right
hand side) for recording.
• Refer to "Dubbing a Tape" to
make a copy of the tape.
"_" To protect recordings
against accidental erasure
Break out the record-protect
tab(s) (see "Notes on Cassette
Tapes").
Turn on the amplifier and play the program source you want
to record.
Press POWER, and then press i_ and _ ,_=:::=X=_
insert a cassette into deck B.
With the side you want to r
facing you
3
4
5
6
Set TAPE TYPE on deck B.
Press PAUSE II, and then press REC O.
depresses automatically.
Do not press POWER or I1_ while the tape deck is
operating. If you do so, the tape may be damaged.
Turn REC LEVEL to adjust the recording level
Turn REC LEVEL so that the peak
level meters reach the recommended
level for the corresponding tape type.
After you've done the adjustments,
stop playing the program source.
II tape
For type IV tape
Press PAUSE II.
Recording starts.
3