OWNER'S RECORD The mode! and serial numbers are located at the rear. Ra cord these numbers in the space provided below. Refer to these burners whenever you call upon your Sony dealer regarding this product. Model No. Serial No, WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION RISK OF ELECTRIC SHOOK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
On safety * Operate the unit only on 120 Should any solid object or liquid fall into the unit, unplug it and have it checked by qualified personnel before operating it any further. * Unplug the unit from the wall outset i iris not to be used {or an extended period of time. To disconnect the cord, pull & out by grasping the plug. Never pull the cord itself. On installation * Place the unit on a level surface.
« Connect the AC power cord fast. Make sure power is off, « Cord plugs and jacks are color coded. Red plugs and jacks are for right channel {R) and white ones for the left chariness (L), * The cable connectors should be fully inserted into the jacks. A loose connection may cause hum and noise.
The TA-E511 has a monaural output for rear speakers of the TANSY, The TA-E811 has lat and right outputs for rear and DRILL speakers of the TA-N611, and for center speakers which need to be connected through an stare amplifier, © Connections for surround sound and DRILL (TA-E611 only) @ Connecting a graphic equalizer, etc. Before connecting the equipment such as a graphic equalizer, remove the shorting plugs.
Location and Function of Controls Front Panel i e TA-E511 § oo = TANNEST [TONE (BASS and TREBLE) controls [Z] Display window [ Function selectors [E] surround button Bose button (7] MASTER VOLUME control [VIDEO 4 INPUT jacks [Z] REAR LEVEL 4 buttons DELAY TIME button [T1] SURROUND selectors (TA-E511) SURROUND MODE selectors and DOLBY PRO LOGIC buttons (TA-E611) {2 BALANCE control INPUT BALANCE control (TA-E511) AUTO INPUT BALANCE indicator (TA-E611) i Remote control sensor [i5 ORC (Dust Room Link Control) b
Programmable Remote Commander AM-P312 Loading the Batteries e Instar two RE (size AA) batteries with correct polarity. R Battery life About half & year of normal operation can be expected when using the Sony SUM-3 {(NS) batteries. When the batteries are exhausted, the commander can no longer operate the unit, Replace both batters with new ones.
The RM-P312 can “learn” various functions of other remote commanders which use infrared rays. When the mode selector is set to SONY STD (Sony standard), buttons on the RM-P312 can be used to perform the functions below: [T] Program control section Mode selector and indicator SONY STD: To control Sony equipment. USER STD: To control equipment whose remote control functions are stored. LEARN: To store functions of other remote commanders emitting infrared rays.
dusting the Sound MASTER VOLUME ng Volume A To increase the volume, turn the MASTER VOLUME control clockwise, To decrease i, turn the iron! counterclockwise, Note Tums down the volume before switching on the unit, This prevents damage to speakers. G Left and ght Sound Balance Adjust BALANCE control 1o comet stereo imaging when the speaker position is not symmetrical. Adjusting To To enhance Treble or bass sound from the front seekers, turn the TREBLE or BASS control clockwise.
Listening to/Watching Program Source Basic operation 1§ 1 slid T 1]ss =B O TA-E511 ‘ 3 Play the program 4 Adjust the volume level. Source.
Program Source The unit allows you o combine a video image with sound from another program source as back ground music, 2 Select the audio sours. 3 piayboinnevideo [§ 4 Voluminousness elev. and audio program sources, MASTER VOLUME Rime 7 Py e Anr cancel the combining function Select the desired video source again. For watching video source on the monitor TV Select the video source with FUNCTION selectors.
Recording Audio Program Source 1 seethe program source. SYSTEM POWER —» ON 1I ®5606 Tape or DAT deck | | Turntable system (for recording) S CD player " VCR 1.4 or LD player | | 3 Play the selected program source. Note The settings of the MASTER VOLUME, TONE, DBMS, SURROUND, and BALANCE controls do not have any affect on recording.
You can operate two or more video or tape audio {and video) signals of the program source is output simultaneously through all recording output jacks. decks for recording at the same time as the 1 Select the video sours, VCR 3 (or LD player), VCR 4. i 2 Set the VCR 10r VCR 2in the recording mode. 10 VIDEO 1.2 W VIDEO LD, 4 VIDEO Ot & [}velodrome AUDIO OUT AUDIO IN 2[ver1 3| vend (or Lo player) VOR 2 VCR g l 3 Play the selected program source.
During video tape edifying, you can add the desired sound on the recording-side video pale from audio or video program source, 4 player Tape (DAT) deck 1 3 Set the VCR 1.0r VCR 2 {for recording) io the recording mode. Video signal VCR VCR 1 Select the video source, VCR 1, VOR 2, VCR world player), or VCR 4 except VCR for recording. itk s e 4Ptaybofl1theselactedprogrammces.
Two front and two rear speakers are necessary to enjoy the surround function. Location of the rear speaker systems Front speaker (L} Front speaker (R} \é/ = Soigne ™ et Selecting the Spe Selecting surround modes DOLBY (Dol Surround) (TA-E511 only) Expands sound just like listening movie theater.
When playing back a program source processed with Dolby surround system, the surround level and input balance must be adjusted to obtain the best surround affect, .’ SYSTEM conflation 4 1 TANNEST Select the DOLBY surround mode. TA-EST TA-SETT Select the DOLBY PRO LOGIC mode according to your speaker system. (TA-E611only) 5 Tum oft the testiness. (TA-E611 only) When using the remote commander, press the T.TONE button again.
Listening to with Surround Effect The unit has three surround modes, DOLBY, HALL, and SIMULATED which have been preset in the factory. You can enjoy the surround sound affects by just selecting the surround mods according to the program source. Celesta surround mode, HALL, SIMULATED, or DOLBY. -l TANNEST TA-ES H B SYSTEM POWER — ON Select the DOLBY PRO LOG!C mode according o your s e system, (TA-E611 on!y) TA-EST I 3Sslectmede!ayfim. 18ms, 20ms, or 30ms.
Connections for Room Link Contort System “The Dual Room Link Control {DRILL) allows you 1o *link” & second room to your main of primary listening room. When the Dual Room Link Can trot Kit RM-S2070K or RM-S2020K {optional) and optional speakers are connected to your program source being played in the main room or a different program source can be heard in the second room. When using the RM-S2070K Connect the DRILL RM-2070, the power amplifier TA-E614, and the speakers for DRILL to the power amplifier.
ISR . sensor on the front of the AV control amplifier. + if there i an obstacle between the AV control amplifier and the head of the commander, the AV control amplifier may not be controlled remotely. [Ttys FEI R e T-Th deo Equipment with BM-P312 The AM-PEEP can learn various functions of other remote commanders emitting infrared rays and allows you to control most of audio and video equipment from a distance. Programmable The two remote commanders must: » be placed straight and head to head.
1f the LEARN indicator flashes or does not go outing steps 2~4. The memory capacity has become full. This occurs when other signals stronger than the remote-control signals have been stored because the signals were programmed ina nosy environment of the remote commanders were placed 100 far apart from each other. Clear all the signals following the procedure on the right and program again from the beginning under the proper conditions.
Troubleshooting Before processing through the check list below, first refer back to the connection and operating procedures. Should any problem persist after you have made these checks, consult your nearest Sony dealer. Trouble Possible Causes Power cannot be muted on, * Check if the power cord is disconnected from the power outfield. No audio, * Check for faulty connection, (See pages Check for short-circuited speaker terminals. * Check that the function selectors are correctly selected.
