User manual

Remote control
You can use your SmartBand 2 to control playback from the Music application on the
connected iPhone.
The three notification lights on the SmartBand 2 are blue when you are using it as a remote
control.
To allow your SmartBand 2 to control the iPhone Music application
1
On your iPhone, open SmartBand 2, then tap SmartBand™.
2
Drag the slider beside Music control to the on position.
To control music playback on your iPhone from your SmartBand 2
1
Make sure that your SmartBand 2 is connected to your iPhone.
2
Briefly press the power key on your SmartBand 2 and tap it immediately. The
three notification lights flash blue.
3
To play or pause the music file, tap the SmartBand 2 once. To go to the next
music file, tap twice. To go to the previous music file, tap three times.
4
To end remote control, briefly press the power key or wait for 10 seconds
without tapping the SmartBand 2. The three blue notification lights turn off.
Connecting to Health
The SmartBand 2 application needs access to the Apple's Health application to be
able to track your activities and progress.
To allow the Apple Health application access to data from the SmartBand 2
application
1
On your iPhone, open Health.
2
Tap Sources > SmartBand 2.
3
Drag the sliders beside all items.
The Health application does not track your stress level from the SmartBand 2 application.
Notification lights
You can determine the status of your SmartBand 2 via the three notification lights on
the device.
Notification light activity
Status of the SmartBand 2
All lights illuminating in white one by one, then turning off
simultaneously
Powered on
All lights illuminating in white simultaneously, then turning off one
by one
Powered off
Light A flashing in green Factory data resetting/Updating
firmware
Light A flashing in blue Connecting to an iPhone
12
This is an Internet version of this publication. © Print only for private use.