User guide SmartBand 2 (for Android™) SWR12
Contents Basics.............................................................................................3 Introduction........................................................................................3 Hardware overview............................................................................3 Charging your SmartBand 2..............................................................4 Assembly...........................................................................................
Basics Introduction Your SmartBand 2 is a companion product that connects wirelessly via Bluetooth® with Android™ devices. Worn on your dominant wrist, it can monitor your body movements and interact with your Android™ device to generate data about your daily life and habits. For example, the SmartBand 2 counts your steps and records data about your physical state while you sleep, walk or run.
10 Micro USB port 11 NFC detection/tapping area The ventilation hole is not used for resetting the device. Do not insert or force sharp objects in the hole as this may damage the device. Charging your SmartBand 2 Before using your SmartBand 2 for the first time, you need to charge it for approximately 30 minutes. Sony chargers are recommended. Your SmartBand 2 turns off automatically when the charger is connected. You cannot turn on the device while a charger is connected.
Assembly To personalise your SmartBand 2, you can replace the wristband with bands of different colour, which can be purchased separately. To assemble your SmartBand 2 • Insert the core into the wristband in such a way that the power key is inserted underneath the power key cover. Wearing your SmartBand 2 You should wear the SmartBand 2 on your dominant hand and position the device on your wrist two fingers above the wrist bone.
Turning on and off To turn on the SmartBand 2 • Press and hold down the power key until your SmartBand 2 vibrates. All notification lights turn on one by one and then turn off. When turning on your SmartBand 2 for the first time, it automatically enters pairing mode and notification light A flashes until your SmartBand 2 is connected to a device. • To turn off the SmartBand 2 Press and hold down the power key until your SmartBand 2 vibrates.
Setting up your SmartBand 2 Preparing to use your SmartBand 2 For your SmartBand 2 to work properly, you must install the latest version of the SmartBand 2 application on the Android™ device, and then pair and connect it with your Android™ device. You also need to install the Lifelog application, which adds extra features and functions that allow you to, for example, see more detailed information about your daily activities.
To set up your SmartBand 2 using Bluetooth® 1 2 3 4 5 Make sure that your SmartBand 2 is fully charged. Android™ device: Make sure that you have installed or updated the SmartBand 2 application to the latest version. Turn on your SmartBand 2. Android™ device: Turn on the Bluetooth® function, then scan for Bluetooth® devices and select SWR12 in the list of available devices. Android™ device: Follow the instructions that appear on the screen.
Using your SmartBand 2 Using the SmartBand 2 application You can view and change settings for your SmartBand 2 by using the SmartBand 2 application on your Android™ device. You can also view your current pulse, stress and physical activities, such as steps, from the SmartBand 2 application. Getting notified You can set your SmartBand 2 to vibrate when you get an incoming call or a notification from your Android™ device.
monitoring, or treating a disease or injury) or replace the advice of a medical professional. Sony Mobile disclaims any warranty that this device could be used or suitable for medical purposes. Seek medical advice before undertaking a new or altered training regime using this device, particularly if using this device together with a pacemaker or other medical devices. Extensive use of pulse and stress measurement increases battery consumption.
Getting the most from the SmartBand 2 heart rate sensor • • Even under ideal conditions, the SmartBand 2 may not be able to get a reliable heart rate reading every time for each individual. And for a small percentage of users, various factors may make it impossible to get any heart rate reading at all. Perform the following steps if you want to improve the reading from the heart rate sensor: Make sure that you wear your SmartBand 2 snugly, but comfortably on your wrist.
The alarm notifies you with a continuous vibration. After you set a time frame for when you would like to be awoken by the alarm, your SmartBand 2 detects when you have reached a state of light sleep (after a period of deep sleep) and then wakes you up. For example, if you set a Smart wake up alarm for between 06:30 and 07:00 AM, the alarm wakes you up sometime between 06:30 and 07:00 AM when you reach a state of light sleep.
To turn on the Out-of-range alert notification function 1 2 From the main application screen of your Android™ device, find and tap SmartBand 2 > > Settings. Tap Get notified, then drag the slider beside Out-of-range alert to the on position. Do not disturb You can turn on the Do not disturb function if you do not want to be interrupted by notifications. When the Do not disturb function is enabled, only the Smart wake up alarm is active.
To control music playback on your Android™ device from your SmartBand 2 1 2 3 4 5 Make sure that your SmartBand 2 is connected to your Android™ device. Select music player as the application that can be controlled through your SmartBand 2. Briefly press the power key on your SmartBand 2. To play or pause the music file, tap the SmartBand 2 once. To go to the next music file, tap twice. To go to the previous music file, tap three times.
Light A flashing in the same colour as on your Android™ device for 5 minutes Other notifications 15 This is an Internet version of this publication. © Print only for private use.
Logging your activities using the Lifelog application Using the Lifelog application The Lifelog application records your physical, social and entertainment activities. For example, you can monitor your stress and recovery, and see how long you’ve been walking or running. You can also see what pictures you took and what music you listened to. To start using the Lifelog application, you need to download it from Google Play™ and then set up an account.
To log in to the Lifelog application 1 2 From the main application screen of your Android™ device, find and tap Lifelog. Follow the instructions that appear on the screen and accept the terms and conditions. Adjusting the stride length for walking and running The Lifelog application uses the number of steps you have taken and your stride length to calculate the distance you have walked or run. The automatic stride length used by default is based on your gender and height.
10 View how many photos you have taken 11 View your total time spent browsing while using applications from Google Play™ and select web browsers 12 View your total time spent reading books or comics using applications from Google Play™ and select applications 13 View your total time spent playing games using applications from Google Play™ 14 View your total time spent watching movies, TV shows and other video content using applications from Google Play™ and select applications 15 Edit to show or
To change the moving activity type 1 2 3 4 From the main application screen of your Android™ device, find and tap Lifelog. Swipe left or right on the timeline to navigate to the logged moving activity that you want to change. Tap the moving activity animation, then tap > Edit activity. Select an activity type, then tap DONE. To delete a sleeping activity 1 2 3 From the main application screen of your Android™ device, find and tap Lifelog.
Important information Using your SmartBand 2 in wet and dusty conditions Your SmartBand 2 is waterproof and protected against dust, so don’t worry if you get caught in the rain or want to wash off dirt after wearing it for a period of time. But remember that the SmartBand 2 is only protected in fresh and chlorinated water up to 3m for a maximum of 30 minutes. Rinse the SmartBand 2 with fresh water under a faucet and dry the device completely after swimming.
Declaration of Conformity We, Sony Mobile Communications AB of Nya Vattentornet SE-221 88 Lund, Sweden declare under our sole responsibility that our product Sony type RD-0180 and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards EN 300 328:V1.8.1, EN 300 330-2:V1.5.1, EN 301 489-7:V1.3.1 EN 301 489-17:V2.2.1, EN 301 489-3:V1.6.
