filename[D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB01COV_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB02REG_STRDN1020-CEL.fm4-273-051-14(1) masterpage: Left For customers in the United States WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB02REG_STRDN1020-CEL.fm 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB02REG_STRDN1020-CEL.fm4-273-051-14(1) Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB02REG_STRDN1020-CEL.fm The font type (Shin Go R) installed in this receiver is provided by MORISAWA & COMPANY LTD. These names are the trademarks of MORISAWA & COMPANY LTD., and the copyright of the font also belongs to MORISAWA & COMPANY LTD. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB01COV_STRDN1020-CELTOC.fm masterpage: Left Table of Contents About This Manual........................................4 Supplied accessories......................................8 Description and location of parts...................9 Getting started .............................................18 Connections 1: Installing the speakers .............................19 2: Connecting the speakers ..........................
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB01COV_STRDN1020-CELTOC.fm masterpage: Right “BRAVIA” Sync Features Additional Information What is “BRAVIA” Sync? .......................... 81 Preparing for the “BRAVIA” Sync ............. 82 Playing back equipment with one-touch operation (One-Touch Play)................... 83 Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) .........................
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB01COV_STRDN1020-CELTOC.fm Supplied accessories • • • • Operating Instructions (this manual) Quick Setup Guide GUI Menu List FM wire antenna (aerial) (1) masterpage: Left Inserting batteries into the remote control Insert two R6 (size AA) batteries (supplied) by matching 3 and # on the batteries to the diagram inside the battery compartment of the remote control.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.fm masterpage: Right Description and location of parts Front panel 1 w; ql 2 3 4 5 qk 6 qj 7 qh qg 8 9 qf qd qs q; qa A ?/1 (on/standby) (page 36, 56, 68) O DISPLAY (page 108) B TONE, TONE MODE Press TONE MODE repeatedly to select BASS or TREBLE, then turn TONE to adjust the level. P DIMMER Adjusts the brightness of the display panel in 3 levels. C SOUND OPTIMIZER (page 68) Q 2CH/A.DIRECT, A.F.D.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.fm masterpage: Left Indicators on the display panel 1 2 LH SW RH L C R SL S SR 3 4 5 6 7 8 USB ANALOG HDMI COAX OPT ARC D + EX True HD PL II x z D.L.L. EQ RDS CAT MEM DTS - HD MSTR HI RES LBR LFE A.P.M. D.RANGE SIRIUS ST DTS - ES 96 24 LPCM SLEEP 9 PARTY ZONE 2 BI - AMP SP A B SB L SB SB R wa w; ql qk qj qh qg A SW Lights up when the audio signal is output from the SUBWOOFER jack.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.fm O Tuning indicators Lights up when the receiver tunes to a radio station, or a satellite radio station. RDS (Europe and Australia models only) Tuned to a station with RDS services. CAT (USA and Canada models only) The category mode is selected during the satellite radio operation. MEM Memory function, such as Preset Memory (page 56), etc., is activated.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.fm G VIDEO/AUDIO INPUT/OUTPUT section (page 23, 27, 28, 30) White (L) AUDIO IN/OUT jacks Red (R) Yellow VIDEO IN/OUT* jacks AUDIO OUT jacks VIDEO OUT jack (page 89) masterpage: Right Remote control Use the supplied remote control to operate this receiver and other equipment. The remote control is pre-programmed to operate Sony audio/video equipment.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.fm A ?/1 (on/standby) Turns the receiver on or sets it to the standby mode. If you press ZONE (C) to switch the remote to zone 2 mode, you can turn the power for zone 2 on or off using ?/1. Saving the power in standby mode When “Ctrl for HDMI” is set to “OFF” (page 82). B AV ?/11) (on/standby) Turns on or off the audio/video equipment that the remote control is programmed to operate.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.fm REPEAT1) Press SHIFT (V), then press REPEAT to play a track or a folder repeatedly. Tips • To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display panel. • The Sleep Timer will be canceled when you perform the following. – Press SLEEP again. – Update the software of the receiver.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.fm masterpage: Left T AUTO CAL Press SHIFT (V), then press AUTO CAL to perform Auto Calibration. Note This button is not available when the receiver is in “GUI MODE”. DISPLAY1) Views information on the display panel. (RM-AAP063 only) Press TV (W), then press DISPLAY to display information of TV. , (Info, Text reveal) Press TV (W), then press to display information such as current channel number and screen mode.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB03DES_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left Getting started You can enjoy your audio/video equipment connected to the receiver by following the simple steps below. Installing and connecting the speakers (page 19, 21) Checking the connection appropriate for your equipment Connecting the TV and video equipment (page 23, 24) The image quality depends on the connecting jack. See the illustration below.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Right 1: Installing the speakers This receiver allows you to use a 7.2 channel system (7 speakers and 2 subwoofers). Example of speaker system configuration 5.1 channel speaker system To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer. 7.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left Tips • When you connect a 7.1 channel speaker system with two surround back speakers, all the angles A should be the same. • When you connect a 7.1 channel speaker system with two front high speakers, place the front high speakers – at an angle between 22° to 45°. – at least 1 meter (3.3 feet) directly above the front speakers. • When you connect a 6.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm * When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output. **Notes on the SPEAKERS SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals connection.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Right 3: Connecting the TV TV Audio signals Video signals or A* B Audio/video signals or C ARC D A Optical digital cord (not supplied) B Audio cord (not supplied) C Component video cord (not supplied) D Video cord (not supplied) E HDMI cable (not supplied) E* ** Recommended connection Alternative connection Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm * To enjoy the TV broadcast in multi channel surround sound from the speakers connected to the receiver, connect A or E. Be sure to turn off the TV’s volume or activate the TV’s muting function. **If you connect the receiver to the Audio Return Channel (ARC) compatible TV, the TV sound will output from the speakers connected to the receiver via the HDMI TV OUT jack.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm • To enjoy 3D images, connect 3D-compatible TV and video equipment (Blu-ray Disc player, Blu-ray Disc recorder, PlayStation 3, etc.) to the receiver using High Speed HDMI cables, put on 3D glasses, and then play back a 3D-compatible content. • Depending on the TV or the video equipment, 3D images may not be displayed. Check the 3D image formats supported by the receiver (page 126).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left If you want to connect several digital equipment, but cannot find an unused input See “Using the sound/images from other inputs (Input Assign)” (page 86). Converting video signals This receiver is equipped with a function for converting video signals. For details, see “Function for conversion of video signals” (page 31).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Right Connecting a Blu-ray Disc player, DVD player Connections Blu-ray Disc player, DVD player Audio/video signals Video signals Audio signals or or A B C D A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left Connecting a satellite tuner, cable TV tuner Satellite tuner, Cable TV tuner Audio/video signals Video signals Audio signals or A B C A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Connecting a PlayStation 3 masterpage: Right PlayStation 3 Audio/video signals A A A Apple Composite AV Cable (not supplied) A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left Connecting other equipment DVD recorder, VCR Audio signals * Video signals A * Audio/video signals B C D Camcorder, video game A Audio cord (not supplied) B Video cord (not supplied) C HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable. D Audio/video cord (not supplied) * If you want to record, you must make this connection (page 54).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Right Function for conversion of video signals OUTPUT jack INPUT jack HDMI TV OUT COMPONENT VIDEO MONITOR OUT MONITOR VIDEO OUT HDMI IN* a – – VIDEO IN a a a COMPONENT VIDEO IN a a a a : Video signals are output. – : Video signals are not output. * HDMI video signals cannot be converted to component video signals and composite video signals.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Right 6: Connecting to the network Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead). Configuring your home network with DLNAcompliant devices. If your server (a computer, etc.) is connected to the Internet, you can connect this receiver to the Internet as well, through the wired LAN connection.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left LAN cable (CAT5) • We recommend that you use this type of cable for a wired LAN. Some flat-type LAN cables are easily affected by noise. We recommend that you use normal-type cables. • If the receiver is used in an environment in which there is power supply noise from electric products or in a noisy network environment, use a shielded-type LAN cable.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Right Configuration example LAN cable (not supplied) Internet Modem Server LAN cable (not supplied) Router Note An audio playback on a server (a computer, etc.) may occasionally be interrupted when you use a wireless connection. 35GB STR-DN1020 4-273-051-14(1) Connections The following illustration is a configuration example of a home network with the receiver, a server.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 7: Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. AC power cord (mains lead) masterpage: Left Preparing the Receiver Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to revert back to the factory default settings.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Setting the speakers masterpage: Right 4 Press V/v repeatedly to select “SP Pattern”, then press or b. 5 Press V/v repeatedly to select the speaker pattern you want, then press . 6 Press RETURN/EXIT O. Selecting the speaker pattern 1 Press MENU. The menu is displayed on the TV screen. 2 Press V/v repeatedly to select “ Settings”, then press or b. The Settings menu list appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 4 5 Press V/v repeatedly to select “SB Assign”, then press or b. Press V/v repeatedly to select the parameter you want, then press . • Speaker B: If you connect an additional front speaker system to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals, select “Speaker B”.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm The DCAC is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference. For details, see “Test Tone” (page 93). masterpage: Right Setting up the Auto Calibration Optimizer microphone Preparing the Receiver Before you perform Auto Calibration Before you perform Auto Calibration, check the following items.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Confirm active subwoofer setup • When a subwoofer is connected, turn on the subwoofer and turn up the volume prior to activating the subwoofer. Turn the LEVEL to just before the mid-point. • If you connect a subwoofer with a crossover frequency function, set the value to maximum. • If you connect a subwoofer with an auto standby function, set it to off (deactivated).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 3 Press B/b repeatedly to select “Standard”, then press . The calibration type is automatically set to “Engineer”. 7 Press V/v repeatedly to select the item you want, then press . • Retry: Performs the Auto Calibration again. • Save: Save the measurement results and exits the setting process. • Warning: Displays warning related to the measurement results.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm To cancel Auto Calibration The Auto Calibration function will be canceled when you perform the following during the measurement process: – Press ?/1. – Press the input buttons on the remote control or turn the INPUT SELECTOR on the receiver. – Press MUTING or . – Press SPEAKERS on the receiver. – Change the volume level. – Connect the headphones. – Press SHIFT, then press AUTO CAL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Customizing the Auto Calibration You can customize the Auto Calibration by selecting the calibration type you want. Press MENU. The menu is displayed on the TV screen. 2 Press V/v repeatedly to select “ Settings”, then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select “Auto Cal.”, then press or b. 4 Press B/b repeatedly to select “Custom”, then press .
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 7 Press V/v repeatedly to select “Do Not Use”, then press . The confirmation display appears on the TV screen. 8 Press V/v repeatedly to select “OK”, then press . “Connecting” appears on the TV screen. “Complete!” appears after the network settings are completed, then press . The display returns to the Network Settings menu. (Depending on the network environment, the network settings may take some time.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 3 Press V/v repeatedly to select a menu you want, then press or b to enter the menu. Overview of the main menus Menu icon Selects the input source equipment connected to the receiver (page 46). Music Selects the music from the server on the Home Network (page 73), Music Services (page 75), iPhone/iPod (page 50) or USB device (page 52).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 2 Press V/v repeatedly to select a menu you want, then press or b to enter the menu. The menu item list appears on the TV screen. Input”. Example: When you select “ masterpage: Left Basic Operations Playing an input source equipment ?/1 Input buttons 3 Press TOOLS/OPTIONS while the menu item list is displayed. The option menu appears.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 3 Select the equipment you want, then press . 4 Turn on the equipment and start playback. 5 Press MASTER VOL +/– or 2 +/– to adjust the volume. You can also use MASTER VOLUME on the receiver. 6 Press SOUND FIELD +/– to enjoy the surround sound. Tips • You can turn INPUT SELECTOR on the receiver or press input buttons on the remote control to select the equipment you want.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left Naming the input (Name Input) You can enter a name of up to 8 characters for inputs and display it. It is more recognizable having the equipment named on the display than the jacks. 1 Select the input you want to name from “ Input” screen. 2 Press TOOLS/OPTIONS. The option menu appears. 3 Select “Name Input”, then press or b. 4 Press V/v repeatedly to select a character, then press b.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Right Playing an iPhone/iPod You can enjoy music/video contents from the iPhone/iPod by connecting it to the iPhone/iPod terminals on the receiver. For details on connecting the iPhone/iPod, see page 29, 32.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Selecting the iPhone/iPod control mode masterpage: Left Operating the iPhone/iPod using “System GUI” mode You can select the iPhone/iPod control mode using the GUI menu or iPhone CTRL on the remote control. You can use the GUI menu to browse contents on the iPhone/iPod. You can also control all operations by viewing the information on the display panel when “GUI MODE” is turned off.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 3 Select the content you want using iPhone/iPod menu. For details on operating the iPhone/iPod, refer to the operating instructions supplied with iPhone/iPod. To operate the iPhone/iPod using the remote control Press USB before you use the following buttons. Press Operation N Starts play. X, x Pauses play. m/M Fast reverses or forwards. ./> Goes to the previous/next file.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Playing a USB device masterpage: Left Product name Model name NWZ-X1050 / X1060 NWZ-S744 / S745 You can enjoy music from the USB device by connecting it to the (USB) port on the receiver. For details on connecting a USB device, see “Connecting an iPhone, iPod, USB device” (page 32). The music file formats that can be played back by this receiver are as follows: File format Extensions MP3 (MPEG-1 Audio Layer III) “.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 1 Press USB or AMP before you use the following buttons. Press MENU. The menu is displayed on the TV screen. 2 Select “ or b. Music”, then press When the USB device is connected, “USB” appears on the TV screen. 3 masterpage: Right Select “USB”, then press . Operation N Starts play. X Pauses play. x Stops play. m/M Fast reverses or forwards. ./> Goes to the previous/next file.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm • Compatibility with all encoding/writing softwares, recording devices, and recording media cannot be guaranteed. Incompatible USB device may produce noise or interrupted audio or may not play at all. • Some time may be needed to start playback when: – the folder structure is complex. – the memory capacity is excessive. • This receiver does not necessarily support all the functions provided in a connected USB device.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 2 Tuner Operations Tip Tuning to a station automatically (Auto Tuning) 1 Select “Auto Tuning”, then press or b. 2 Press V/v. The tuning scale for direct tuning is shown below. FM AM USA, Canada 100 kHz 10 kHz* Europe, Australia 50 kHz 9 kHz Press V to scan from low to high, press v to scan from high to low. The receiver stops scanning whenever a station is received.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left Tip 3 Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to an AM station. Presetting FM/AM radio stations Press (Preset Tuning) . If you cannot tune to a station “– – – .– – MHz” appears and then the screen returns to the current frequency. Make sure you have entered the right frequency. If not, repeat step 2.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Tuning to preset stations 1 Select “ FM FM” or “ AM AM” from the menu, then press or b. 2 Select the preset station you want. Preset numbers from 1 to 30 are available. Naming preset stations (Name Input) On “ FM FM” or “ AM AM” screen, select the preset number which you want to name. 2 Press TOOLS/OPTIONS. The option menu appears. 3 Select “Name Input”, then press or b.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Left Listening to Satellite Radio Connecting a satellite radio tuner (USA and Canada models only) Connect the SiriusConnect Home tuner. When you use the SiriusConnect Home tuner with this receiver, be sure to connect the AC power adaptor supplied with the tuner to a wall outlet.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Preparing to listen to a satellite radio V/v/b, masterpage: Right Checking receiving conditions (Antenna Aiming) 1 Select “Antenna Aiming” from the option menu, then press . 2 While checking the quality of the reception, adjust the direction of the antenna to obtain the best reception. TOOLS/ OPTIONS MENU 1 Press MENU. Press MENU. The menu is displayed on the TV screen. 2 Select “ SR SR”, then press or b.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Selecting a channel by category (Category Mode) You can select a channel from one category or all the categories. 1 Select the category, then press . Presetting satellite radio channels You can store up to 30 SIRIUS Satellite Radio channels as your favorite channels. • All: You can select a channel from all the categories. • (category name): You can select a channel from one category.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm Selecting preset channels 1 Select “ SR SR” from the menu, then press or b. 2 Select the preset number from the preset list, then press . You can select stored preset channels from 1 to 30. Notes Restricting access to specific channels (Parental Lock) You can restrict access to certain channels using your own lock code. The lock code is set to “0000” as the default.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm 5 Press SHIFT, then press the numeric buttons to enter your 4-digit lock code. “The channel has been locked.” appears and the Parental Lock is set. To delete the numbers you have entered, go back to step 2 by pressing RETURN/ EXIT O, and then repeat the procedure above from step 2.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STRDN1020-CEL.fm masterpage: Right Satellite radio message list Explanation Remedies Antenna [ANTENNA] The antenna is not connected properly. Check the connection between the SiriusConnect Home tuner and the antenna. Acquiring [ACQUIRING] The receiving condition is not good. Try moving the antenna to another location.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Left Note Enjoying Surround Sound Selecting the sound field This receiver can create multi channel surround sound. You can select one of the optimized sound fields from the receiver’s pre-programmed sound fields. SOUND FIELD +/– You cannot select “A. DIRECT” when you select GAME and USB as input. Auto Format Direct (A.F.D.) mode The Auto Format Direct (A.F.D.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right x HD-D.C.S. x HALL (Hall) HD Digital Cinema Sound (HD-D.C.S.) is Sony’s new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on precise response measurement data of a mastering studio. With HD-D.C.S.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm When headphones are connected You can only select this sound field if the headphones are connected to the receiver. x HP 2CH (HP (2CH)) This mode is selected automatically if you use headphones (except “A. DIRECT”). Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channels except LFE signals.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right Digital audio formats supported by the receiver Digital audio formats that this receiver can decode depend on digital audio output jacks of the equipment connected. This receiver supports the following audio formats. Audio format Maximum number of channels Connection between the playback equipment and the receiver COAXIAL/OPTICAL HDMI 5.1 a a Dolby Digital EX 6.1 a a Dolby Digital Plus 7.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Left Using the SOUND OPTIMIZER Resetting sound fields to the default settings The Sound Optimizer lets you enjoy clear and dynamic sound at low volume levels. It automatically calibrates the sound which cannot be heard well when you turn down the volume level. After Auto Calibration is performed, the sound level is optimized to suit your environment.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Using Network Features About the network functions of the receiver About DLNA DLNA (Digital Living Network Alliance) is a standard organization made up of manufacturers of various products, such as servers (computers, etc.), AV equipment, and mobile computing devices which exchange content (music, photos, and videos).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm When using Windows 7 This section explains how to set up manufacturer-installed Windows Media Player 12 for Windows 7. For details on how to operate Windows Media Player 12, refer to Help for Windows Media Player 12. 1 masterpage: Left 4 Select [Home network] or [Work network] according to the environment in which the receiver is used.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm 8 If [Media streaming is not turned on] appears in the [Media streaming options] window, select [Turn on media streaming]. 9 Select [Allow all]. masterpage: Right 1 Go to [Start] – [All Programs]. 2 Select [Windows Media Player]. The [Allow All Media Devices] window opens. If all the devices in the local network are set to [Allowed], select [OK] and close the window. Windows Media Player 11 starts up.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm 6 Check [Private] and select [Next]. masterpage: Left 12 Refresh the server list. After you finish setting up Windows Media Player 11, refresh the server list of the receiver and select this server from the server list. For details on selecting a server, see “To refresh the server list” (page 72).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Enjoying audio content stored on the server 3 masterpage: Right Select “HOME NETWORK”, then press . The server list appears on the TV screen. If the last selected item (playlist, album, folder, etc.) appears on the TV screen, press RETURN/EXIT O repeatedly until the server list appears. When “No Server” appears, or when the server on the list is not available, press TOOLS/OPTIONS. Select “Refresh”, then press .
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Tips • If you select a folder (such as an artist folder, genre folder, etc.), then press the N button, the receiver plays all items in the selected folder. • The receiver resumes from the last selected item when the function is changed to Home Network function, until the receiver is turned off. When “Network Standby” is set to “On”, play resumes from the last selected item, even if you turned off the receiver.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right The following steps explain how to select “vTuner” as an example of music services offered on the Internet. Listening to music services 1 You can listen to music services offered on the Internet with this receiver (Music Service function). To use this function, the receiver must be connected to the network and the network must be connected to the Internet.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Left To operate Music Services function using the remote control To listen to the preset station 1 Select “ Music” from the menu, then To Do the following 2 Select “MUSIC SERVICES”, then Change the station or service Press RETURN/EXIT O to return to the service provider list, then select the service again. To return to the playback display again, press TOOLS/ OPTIONS and select “Now Playing”.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right 2 Select “MUSIC SERVICES”, then press . The service provider list appears on the TV screen. If the receiver automatically displays the last selected service or station, press RETURN/EXIT O repeatedly until the service provider list appears. SHIFT 3 Select “Registration Code”, then press . The registration code of the receiver appears.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm • When you start a PARTY as PARTY host, you may face a time gap between the audio output and visual display in the following cases. – The Audio Return Channel (ARC) function is used. – The video output of the equipment is connected to the TV and the audio output is connected to the digital or analog audio input jacks on the receiver. • Sources with copyright protection may not be streamed.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm 3 Select “ press To go back to the previous screen Settings”, then or b. The Settings menu list appears on the TV screen. 4 Select “Network”, then press . 5 Select “Software Update”, then press . 6 7 Network features message list Network settings Message and explanation Select “Update”, then press . Connection Fail The receiver has failed to connect the network.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Message and explanation No Track There is no playable file in the selected folder on the server. Not Found There is no item on the server that matches a keyword. Not in Use An operation that is currently prohibited is being performed. Music Services Message and explanation Cannot Connect The receiver cannot be connected to the server. Cannot Get Data The receiver cannot obtain content from the server.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm 1 Press SHIFT, then press ALPHABET SEARCH while an item list (artist list, track list, etc.) is displayed on the TV screen. The keyword input display appears on the TV screen. 2 Press SHIFT, then press the numeric/text buttons to enter a keyword. A keyword can be up to 15 characters. Note Enter a keyword that will match the letters or a word at the beginning of the name or title of the item you want to search for.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Preparing for the “BRAVIA” Sync The receiver is compatible with the “Control for HDMI-Easy Setting” function. • If your TV is compatible with the “Control for HDMI-Easy Setting” function, you can set the Control for HDMI function of the receiver and playback equipment automatically by setting the Control for HDMI function on your TV (page 82).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right Notes Notes • Before you perform the “Control for HDMI-Easy Setting” on your TV, be sure to turn on the TV and other connected equipment including the receiver first. • If the playback equipment cannot function after you have made the settings for “Control for HDMIEasy Setting”, check the Control for HDMI setting on your TV.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm • When you adjust the TV volume, the System Audio Control function adjusts the receiver’s volume simultaneously. Notes • If System Audio Control does not function according to your TV setting, refer to the operating instructions of the TV. • When “Ctrl for HDMI” is set to “ON”, the “Audio Out” settings in the HDMI Settings menu will set automatically based on the System Audio Control settings.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Other Operations Using Auto Volume function You can adjust the volume automatically depending on the input signal or content from the connected equipment (ADVANCED AUTO VOLUME function). This function is useful, for example, when the sound of a commercial is louder than the TV programs.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Notes • Some audio input modes may not be set up based on the input. • When either the USB input, HOME NETWORK, MUSIC SERVICES or SIRIUS is selected, “------” appears on the display panel, and you cannot change to other modes. • When “A. DIRECT” is being used, audio input is set to “ANALOG”. You cannot select other modes. • The Audio Return Channel (ARC) function does not work in the following cases.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Input name Assignable video input jacks Assignable audio input jacks BD/DVD GAME SAT/ CATV masterpage: Right VIDEO 1 VIDEO 2 MD/TAPE SA-CD/ CD COMP.1 a* a a a a a a COMP.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Using a bi-amplifier connection 1 Press MENU. The menu is displayed on the TV screen. 2 Select “ press Settings”, then or b. The Settings menu list appears on the TV screen. 3 Select “Speaker”, then press or b. 4 Select “SP Pattern”, then press or b. 5 Select the appropriate speaker pattern so that there are no surround back speakers and front high speakers, then press . 6 Select “SB Assign”, then press or b.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right Making a zone 2 connection Outputs sound from speakers in zone 2 using the receiver and another amplifier.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Operating the receiver from zone 2 The following operations are described for connecting an IR repeater and operating the receiver in zone 2. When an IR repeater is not connected, use this receiver in the main zone. ?/1 ZONE Input buttons SOURCE 1 Turn on the main receiver (this receiver). 2 3 Turn on the receiver in zone 2. Press ZONE. The remote control switches to zone 2.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm 3 Adjusting Settings masterpage: Right Select the menu item you want, then press . Example: When you select “Auto Cal.”. Using the Settings menu You can adjust various settings for speakers, surround effects, etc. using the Settings menu. To display the menu of the receiver on the TV screen, make sure that the receiver is in “GUI MODE” by following the steps in “To turn “GUI MODE” on and off” (page 45).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Left 2 Select “Lvl”. Speaker Settings menu You can adjust each speaker manually. You can also adjust the speaker levels after the Auto Calibration is completed. Note The speaker settings are only for the current seating position. x SP Pattern (Speaker Pattern) Select “SP Pattern” according to the speaker system which you are using. Select the speaker pattern before you perform Auto Calibration.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm To adjust the size of each speaker You can adjust each speaker’s (front left/right, front left/right high, center, surround left/right, surround back left/right) size. 1 Select the speaker on the screen for which you want to adjust the size, then press . 2 Select “Size”. 3 Set the size of the selected speaker, then press .
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm When a test tone is not output from the speakers • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have short-circuit problem. • Make sure that you are not using PARTY STREAMING function (page 77).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm • Theater: Theater type (default setting) mixes reflection and reverberation sound creating the characteristics of a mastering studio. Additionally, this type mixes in frequency characteristics that are often found in professional studios and movie theaters. It is ideal for watching movies in a listening room that has less reverberation.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Left Notes • This function is useful when you use a large LCD or plasma monitor or a projector. • This function does not work when “A. DIRECT” is being used. x Dual Mono (Digital broadcast language selection) Lets you select the language you want when you listen to the dual audio of a digital broadcast when available. This feature only functions for Dolby Digital sources.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right Video Settings menu You can make settings for video. x Resolution (Converting video signals) Lets you convert the resolution of analog video input signals.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Left Notes HDMI Settings menu You can make the required settings for equipment connected to the HDMI jack. x Ctrl for HDMI (Control for HDMI) Lets you turn the Control for HDMI function on or off. For details, see “Preparing for the “BRAVIA” Sync” (page 82). • ON • OFF Note When you set “Ctrl for HDMI” to “ON”, “Audio Out” may be changed automatically.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Network Settings menu You can make the settings for the network. The Network Settings menu is available only when the Home Network or Music Services function is selected. x Settings Lets you make the network settings.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm To add devices to the device list 1 Select “Access Settings”, then press x PARTY STREAMING You can set the receiver to use the PARTY STREAMING function. . 1 Select “PARTY STREAMING”, then press masterpage: Left 2 Select “Control Device”, then press . . The device list appears on the TV screen. 2 Select “On” or “Off”, then press . • On: The receiver can be detected by other devices on the home network.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm 2 Select “Start Registration”, then press . The receiver starts to detect Media Remote device that ready for registration. However, the receiver will exit the registration if no device detected in 30 seconds. “Connecting” appears on the TV screen when Media Remote device is detected. 3 Select “Finish”, then press . To assign the device name 1 Select “Device Name”, then press 2 Press .
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm System Settings menu You can customize the settings of the receiver. x Auto Standby Lets you set the receiver switch to standby mode automatically when you do not operate the receiver or when there is no signals input to the receiver. • ON: Switches to standby mode after approximately 30 minutes. • OFF: Does not switch to standby mode.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right Using the menu in the display panel Press GUI MODE repeatedly to select “GUI OFF”. The receiver is switched to front panel display mode. 1 2 3 Press AMP. Press MENU. Press V/v repeatedly to select the menu you want, then press or b. 4 Press V/v repeatedly to select the parameter you want to adjust, then press or b. 5 Press V/v repeatedly to select the setting you want, then press .
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Left Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 103.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm Menu [Display] masterpage: Right Parameters [Display] Settings Default setting Surround speakers sizeb) [SUR SIZE] LARGE, SMALL LARGE Front high speakers sizeb) [FH SIZE] LARGE, SMALL LARGE Surround back speaker assignd) [SB ASSIGN] SPK B, BI-AMP, OFF OFF Front left speaker distanceb) [FL DIST.] FL 1.00 m to FL 10.00 m (FL 3’3” to FL 32’9”) (0.1 m (1 inch) interval)e) FL 3.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm masterpage: Right Menu [Display] Parameters [Display] Settings Default setting HDMI settings [] Control for HDMI [CTRL: HDMI] CTRL ON, CTRL OFF CTRL ON Pass Through [PASS THRU] ON, AUTO, OFF OFF Audio out [AUDIO OUT] AMP, TV+AMP AMP HDMI input assignment [H. ASSIGN] For details, see “HDMI input assign” (page 87).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STRDN1020-CEL.fm To view the information on the display panel The display panel provides various information of the receiver status such as sound field. masterpage: Left Tip You cannot switch the display while “GUI MODE” is shown on the display panel. Press GUI MODE repeatedly to select “GUI OFF”. 1 Select the input for which you want to check the information. 2 Press AMP, then press DISPLAY repeatedly.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB06REM_STRDN1020-CEL.fm 3 Using the Remote Control RM SET UP SHIFT Input buttons Press the numeric buttons to enter the numeric code. If more than one code exists, try to enter either one which corresponds to the equipment including TV. Use the tables on page 110–113 to find the numeric code(s) corresponding to the equipment.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB06REM_STRDN1020-CEL.fm The numeric codes corresponding to the equipment and the maker of the equipment masterpage: Left To control a tape deck Maker Code(s) SONY 201, 202 DENON 204, 205 Use the numeric codes in the tables below to program non-Sony equipment and also Sony equipment that the remote control is normally unable to control.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB06REM_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB06REM_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB06REM_STRDN1020-CEL.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm masterpage: Left On placement Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources • Before operating the receiver, check that the operating voltage is identical with your local power supply.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Power The receiver is turned off automatically. • “Auto Standby” is set to “ON” (page 102).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm There is no sound from a specific equipment. • Check that the equipment is connected correctly to the audio input jacks for that equipment. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the equipment. • Check the INPUT MODE (page 85). • Check the setting of “Audio Out” in the HDMI Settings menu (page 98).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm No sound is output from the receiver and TV speaker. • Check the setting of “Audio Out” in the HDMI Settings menu (page 98). • Check that the equipment is connected correctly to the HDMI jack for that equipment. • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback equipment, you may need to set up the HDMI setting of the equipment.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm Image No image appears on the TV. • Select the appropriate input using the input buttons. • Set your TV to the appropriate input mode. • Move your audio equipment away from the TV. • Assign the equipment video input correctly. • The input signal should be same as the input function when you are up-converting an input signal with this receiver (page 31).
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm Radio stations cannot be tuned in. • Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) and connect an external antenna (aerial), if necessary. • Keep the satellite radio antenna, away from the speaker cords and the power cord to avoid picking up noise.* • The signal strength of the stations is too weak with automatic tuning. Use direct tuning.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm There is noise, skipping, or distorted sound. • Turn off the receiver and reconnect the USB device, then turn on the receiver. • The music data itself contains noise, or the sound is distorted. The USB device cannot be connected into the (USB) port. • The USB device is being connected backwards. Connect the USB device in the correct orientation.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm Network connection An error message appears. • Check the nature of the error. See “Network features message list” (page 79). The receiver cannot connect to the network. • Check the network status. See “To check the network information” (page 99), then select “Connection” in step 2. If “No Connection” appears, set up the network connection again (page 69). • Make sure the router is turned on.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm You cannot play audio data normally. • Shuffle Play is selected. Press SHIFT, then press SHUFFLE repeatedly until “SHUF” disappears. Play does not start, or does not automatically change to the next track or file. • Make sure that the audio file you are trying to play is in a format supported by this receiver (page 73). • WMA files with DRM copyright protection cannot be played back.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm The receiver cannot be turned on automatically when accessed by devices on the network. • The receiver itself does not support the Wake-on-LAN standard. Therefore the receiver cannot be turned on by Wake-onLAN when “Network Standby” is set to “Off”. Set “Network Standby” to “On” so that the receiver can respond to operations by other devices via a network (page 101). Devices on the network cannot turn on the receiver.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm • The types and the number of equipment which can be controlled by the “BRAVIA” Sync are restricted in the HDMI CEC standard as follows. – Recording equipment (Blu-ray Disc recorder, DVD recorder, etc.): up to 3 equipment – Playback equipment (Blu-ray Disc player, DVD player, etc.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm 1) Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 8 ohm loads, both channels driven, from 20 Hz – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section USA model1) Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz, THD 0.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm masterpage: Left AM tuner section Tuning range Area Tuning scale 10 kHz step 9 kHz step USA, Canada 530 kHz – 1,710 kHz 531 kHz – 1,710 kHz Europe, Australia – 531 kHz – 1,602 kHz Antenna (aerial) Loop antenna (aerial) Intermediate frequency 450 kHz Video section Inputs/Outputs Video: 1 Vp-p, 75 ohms COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms PB: 0.7 Vp-p, 75 ohms PR: 0.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB07ADD_STRDN1020-CEL.fm masterpage: Right iPhone/iPod section DC 5V 1.0 A MAX USB section Supported bit rate* MP3 (MPEG 1 Audio Layer-3): 32 kbps – 320 kbps, VBR WMA: 48 kbps – 192 kbps AAC: 48 kbps – 320 kbps * Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB01COV_STRDN1020-CELIX.fm masterpage: Left Index Numerics C F 2 channel 64 5.1 channel 19 7.1 channel 19 Cable TV tuner 28 Calibration Type 104 Camcoder 30 Category Mode 60 CD player 32 Clear memory 36 remote control 113 sound field 68 Connection antennas 33 audio equipment 32 iPhone/iPod 29 Network 33 speakers 21 TV 23 USB device 32 video equipment 24 Control for HDMI 98 Crossover frequency 93, 105 FM 55 FM Mode 55, 106 A A.F.D.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB01COV_STRDN1020-CELIX.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB08LIC_STRDN1020-CEL.fm masterpage: Left END-USER LICENSE AGREEMENT FOR SONY SOFTWARE You should carefully read the following agreement before using the SONY SOFTWARE (defined below). Using the SONY SOFTWARE indicates your acceptance of the agreement. If you do not agree with it, you are not authorized to use the SONY SOFTWARE.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB08LIC_STRDN1020-CEL.fm masterpage: Right EXCLUSION OF WARRANTY ON SONY SOFTWARE You expressly acknowledge and agree that use of the SONY SOFTWARE is at your sole risk.
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB08LIC_STRDN1020-CEL.
