filename[D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB01COV_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB02REG_STRDH820-CEL.fm4-266-497-11(2) masterpage: Left For customers in the United States WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB02REG_STRDH820-CEL.fm 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB02REG_STRDH820-CEL.fm4-266-497-11(2) Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB02REG_STRDH820-CEL.fm masterpage: Right iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB01COV_STRDH820-CELTOC.fm masterpage: Left Table of Contents About This Manual........................................4 Supplied accessories......................................7 Description and location of parts...................9 Getting started .............................................18 Connections 1: Installing the speakers .............................19 2: Connecting the speakers ..........................21 3: Connecting the TV .
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB01COV_STRDH820-CELTOC.fm Using the Remote Control Programming the remote control ................ 80 Resetting the remote control ....................... 85 Additional Information Precautions .................................................. 85 Troubleshooting .......................................... 86 Specifications .............................................. 93 Index............................................................
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB01COV_STRDH820-CELTOC.fm masterpage: Left Inserting batteries into the remote control Insert two R6 (size AA) batteries (supplied) by matching 3 and # on the batteries to the diagram inside the battery compartment of the remote control. Notes • Do not leave the remote control in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.fm masterpage: Right Description and location of parts Front panel 1 ql qk 2 3 4 qj 5 6 qh qg qf 7 8 qd qs qa 9 q; A ?/1 (on/standby) (page 34, 52, 58) E Display panel (page 10) B TONE, TONE MODE Press TONE MODE repeatedly to select BASS or TREBLE, then turn TONE to adjust the level. F Remote control sensor Receives signals from remote control.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.fm masterpage: Left Indicators on the display panel 1 2 3 LH SW RH L C R SL S SR 4 5 6 7 D + EX True HD NEO:6 USB ANALOG HDMI COAXOPT ARC PL II x z D.L.L. EQ RDS MEM DTS - HD MSTR HI RES LBR LFE A.P.M. D.RANGE ST DTS - ES 96 24 LPCM SLEEP 8 ZONE 2 BI - AMP SP A B SB L SB SB R w; ql qk qj qh qg qf A SW Lights up when the audio signal is output from the SUBWOOFER jack.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.fm N Tuning indicators Lights up when the receiver tunes to a radio station. RDS (Europe, Australia and Taiwan models only) Tuned to a station with RDS services. MEM Memory function, such as Preset Memory (page 52), etc., is activated. ST Stereo broadcast O EQ Lights up when the equalizer is activated. P D.RANGE Lights up when dynamic range compression is activated (page 71). Q A.P.M. Lights up when the A.P.M.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.fm G COMPONENT VIDEO INPUT/ OUTPUT section (page 23, 27, 28) Green (Y) Blue (PB) Y, PB, PR IN/OUT* jacks Red (PR) * You must connect the HDMI TV OUT or MONITOR OUT jack to your TV to watch the selected input image (page 23). masterpage: Right Remote control Use the supplied remote control to operate this receiver and other equipment. The remote control is pre-programmed to operate Sony audio/video equipment.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.fm A ?/1 (on/standby) Turns the receiver on or sets it to the standby mode. If you press ZONE (C) to switch the remote to zone 2 mode, you can turn the power for zone 2 on or off using ?/1. Saving the power in standby mode When “Ctrl for HDMI” is set to “OFF” (page 59). B AV ?/11) (on/standby) Turns on or off the audio/video equipment that the remote control is programmed to operate.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.fm K TV CH +/–1)2) or PROG +/–1)2) Press TV (W), then press TV CH +/– or PROG +/– to scan for the preset TV channels. SLEEP Press AMP (X), then press SLEEP to set the receiver to turn off automatically at specified time. Each time you press SLEEP, the display changes cyclically as follows: PRESET +/–1)2) Selects preset stations or channels.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.fm 1) S GUIDE1) or Press TV (W), then press GUIDE or display the on-screen program guide. masterpage: Left to T AUTO CAL Press SHIFT (V), then press AUTO CAL to perform Auto Calibration. Note This button is not available when the receiver is in “GUI MODE”. DISPLAY1) Views information on the display panel. (RM-AAP061 only) Press TV (W), then press DISPLAY to display information of TV.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB03DES_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Left Getting started You can enjoy your audio/video equipment connected to the receiver by following the simple steps below. Installing and connecting the speakers (page 19, 21) Checking the connection appropriate for your equipment Connecting the TV and video equipment (page 23, 24) The image quality depends on the connecting jack. See the illustration below.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Right 1: Installing the speakers This receiver allows you to use a 7.2 channel system (7 speakers and 2 subwoofers). Example of speaker system configuration 5.1 channel speaker system To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer. 7.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Left Tips • When you connect a 7.1 channel speaker system with two surround back speakers, all the angles A should be the same. • When you connect a 7.1 channel speaker system with two front high speakers, place the front high speakers – at an angle between 22° to 45°. – at least 1 meter (3.3 feet) directly above the front speakers. • When you connect a 6.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm * When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output. **Notes on the SPEAKERS SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals connection.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Right 3: Connecting the TV TV Audio signals Video signals or A* B Audio/video signals or C ARC D A Optical digital cord (not supplied) B Audio cord (not supplied) C Component video cord (not supplied) D Video cord (not supplied) E HDMI cable (not supplied) E* ** Recommended connection Alternative connection Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm * To enjoy the TV broadcast in multi channel surround sound from the speakers connected to the receiver, connect A or E. Be sure to turn off the TV’s volume or activate the TV’s muting function. **If you connect the receiver to the Audio Return Channel (ARC) compatible TV, the TV sound will output from the speakers connected to the receiver via the HDMI TV OUT jack.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm • To enjoy 3D images, connect 3D-compatible TV and video equipment (Blu-ray Disc player, Blu-ray Disc recorder, PlayStation 3, etc.) to the receiver using High Speed HDMI cables, put on 3D glasses, and then play back a 3D-compatible content. • Depending on the TV or the video equipment, 3D images may not be displayed. • Not every HDMI equipment supports all functions that are defined by the specific HDMI version.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Left If you want to connect several digital equipment, but cannot find an unused input See “Using the sound/images from other inputs (Input Assign)” (page 63). Converting video signals This receiver is equipped with a function for converting video signals. For details, see “Function for conversion of video signals” (page 31).
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Right Connecting a Blu-ray Disc player, DVD player Connections Blu-ray Disc player, DVD player Audio/video signals Video signals Audio signals or or A B C D A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Left Connecting a satellite tuner, cable TV tuner Satellite tuner, Cable TV tuner Audio/video signals Video signals Audio signals or A B C A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Connecting a PlayStation 3 masterpage: Right PlayStation 3 Audio/video signals A A A Apple composite AV cable (not supplied) A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Left Connecting other equipment DVD recorder, VCR Audio signals * Video signals A * Audio/video signals B C D Camcorder, video game A Audio cord (not supplied) B Video cord (not supplied) C HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable. D Audio/video cord (not supplied) * If you want to record, you must make this connection (page 50).
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Right Function for conversion of video signals INPUT jack OUTPUT jack HDMI IN HDMI TV OUT COMPONENT VIDEO IN COMPONENT VIDEO MONITOR OUT VIDEO IN MONITOR VIDEO OUT : Same type of signal as that of the input signal is output. : Video signals are upconverted and output. Notes on converting video signals • When video signals from a VCR, etc.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Right 6: Connecting the AC power cord (mains lead) Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead). Connect the AC power cord (mains lead) to a wall outlet.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Preparing the Receiver Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to revert back to the factory default settings. Be sure to use the buttons on the receiver to perform this operation.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm 3 Press V/v repeatedly to select “Speaker”, then press or b. 1 5 Press V/v repeatedly to select the speaker pattern you want, then press . 6 Press RETURN/EXIT O. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select “Speaker”, then press or b. 4 Press V/v repeatedly to select “SB Assign”, then press or b. 5 Press V/v repeatedly to select the parameter you want, then press .
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Selecting the front speaker You can select the front speakers you want to drive. Be sure to use the buttons on the receiver to perform this operation. SPEAKERS Press SPEAKERS repeatedly to select the front speaker system you want to drive. You can confirm the selected speakers terminals by checking the indicator on the display panel.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm • Remove any obstacles in the path between the optimizer microphone and the speakers to avoid measurement errors. • Get accurate measurement by making sure the environment is free from noise and quiet. 1 2 Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 3 Set up the optimizer microphone. Place the optimizer microphone at your seating position.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Performing Auto Calibration masterpage: Left 3 Press V/v repeatedly to select “Auto Cal.”, then press or b. 4 Press B/b repeatedly to select “Standard”, then press . ?/1 Input buttons The calibration type is automatically set to “Engineer”. GUI MODE V/v/B/b, MENU MUTING/ 1 MASTER VOL +/–/ 2 +/– Press GUI MODE. After “GUI ON” appears on the display panel for a while, the GUI menu appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm 7 Press V/v repeatedly to select the item you want, then press . 8 Save the measurement result. Select “Save” in step 7. Note 9 To cancel Auto Calibration The Auto Calibration function will be canceled when you perform the following during the measurement process: – Press ?/1. – Press the input buttons on the remote control or turn the INPUT SELECTOR on the receiver. – Press MUTING or .
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Message list after Auto Calibration measurement Display and explanation Error Code 31 The SPEAKERS is set to off. Set to other speaker settings and perform the Auto Calibration again. Error Code 32 None of the speakers were detected. Make sure that the optimizer microphone is connected properly and perform the Auto Calibration again.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm 3 Guide to on-screen display operation masterpage: Right Press V/v repeatedly to select a menu you want, then press or b to enter the menu. GUI MODE V/v/B/b, RETURN/ EXIT O Using the menu 2 Press V/v repeatedly to select the menu item you want to adjust, then press to enter the menu item. 5 Repeat steps 3 and 4 to select the parameter you want.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Overview of the main menus Menu icon Input Music Video 2 Description Selects the input source equipment connected to the receiver (page 43). masterpage: Left Press V/v repeatedly to select a menu you want, then press or b to enter the menu. The menu item list appears on the TV screen. Input”. Example: When you select “ Selects the music from iPhone/iPod (page 46) or USB device (page 48).
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm 3 Basic Operations ?/1 SOUND FIELD +/– TOOLS/ OPTIONS 4 Turn on the equipment and start playback. 5 Press MASTER VOL +/– or 2 +/– to adjust the volume. MENU You can also use MASTER VOLUME on the receiver. 6 MASTER VOL +/–/ 2 +/– MUTING/ 1 Press SOUND FIELD +/– to enjoy the surround sound. You can also use 2CH/A.DIRECT, A.F.D., MOVIE (HD-D.C.S.) or MUSIC button on the receiver. For details, see page 54.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Tips • You can turn INPUT SELECTOR on the receiver or press input buttons on the remote control to select the equipment you want. • You can adjust the volume differently depending on the speed you turn the MASTER VOLUME on the receiver. To turn the volume up or down quickly: turn the knob quickly. To make fine adjustment: turn the knob slowly.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Right Playing an iPhone/iPod You can enjoy music/video contents from the iPhone/iPod by connecting it to the iPhone/iPod terminals on the receiver. For details on connecting the iPhone/iPod, see page 29, 32.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Selecting the iPhone/iPod control mode masterpage: Left Operating the iPhone/iPod using “System GUI” mode You can select the iPhone/iPod control mode using the GUI menu or iPhone CTRL on the remote control. You can use the GUI menu to browse contents on the iPhone/iPod. You can also control all operations by viewing the information on the display panel when “GUI MODE” is turned off.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm 3 Select the content you want using iPhone/iPod menu. For details on operating the iPhone/iPod, refer to the operating instructions supplied with iPhone/iPod. To operate the iPhone/iPod using the remote control SHIFT Press USB before you use the following buttons. Press Operation N Starts play. X, x Pauses play. m/M Fast reverses or forwards. ./> Goes to the previous/next file.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Playing a USB device masterpage: Left Product name Model name NWZ-X1050 / X1060 NWZ-S744 / S745 You can enjoy music from the USB device by connecting it to the (USB) port on the receiver. For details on connecting a USB device, see “Connecting an iPhone, iPod, USB device” (page 32). The music file formats that can be played back by this receiver are as follows: File format Extensions MP3 (MPEG-1 Audio Layer III) “.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm 1 2 Press USB or AMP before you use the following buttons. Press MENU if the GUI menu does not appear on the TV screen. Press Operation N Starts play. X Pauses play. x Stops play. m/M Fast reverses or forwards. ./> Goes to the previous/next file. FOLDER +/– Goes to the previous/next folder. REPEAT* Enters repeat mode. Select “ or b. Music”, then press Press to select “USB”.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm • Compatibility with all encoding/writing softwares, recording devices, and recording media cannot be guaranteed. Incompatible USB device may produce noise or interrupted audio or may not play at all. • Some time may be needed to start playback when: – the folder structure is complex. – the memory capacity is excessive. • This receiver does not necessarily support all the functions provided in a connected USB device.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm 2 Tuner Operations Tip Tuning to a station automatically (Auto Tuning) 1 Select “Auto Tuning”, then press or b. 2 Press V/v. The tuning scale for direct tuning is shown below. FM AM USA, Canada 100 kHz 10 kHz* Europe, Australia, Taiwan 50 kHz 9 kHz Press V to scan from low to high, press v to scan from high to low. The receiver stops scanning whenever a station is received.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm masterpage: Left Tip 3 Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to an AM station. Presetting FM/AM radio stations Press (Preset Tuning) . If you cannot tune to a station “– – – .– – MHz” appears and then the screen returns to the current frequency. Make sure you have entered the right frequency. If not, repeat step 2.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB04GET_STRDH820-CEL.fm Tuning to preset stations 1 Select “ FM FM” or “ AM AM” from the menu, then press or b. 2 Select the preset station you want. Preset numbers from 1 to 30 are available. Naming preset stations (Name Input) On “ FM FM” or “ AM AM” screen, select the preset number which you want to name. 2 Press TOOLS/OPTIONS. The option menu appears. 3 4 5 Select “Name Input”, then press or b.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Left Note Enjoying Surround Sound Selecting the sound field This receiver can create multi channel surround sound. You can select one of the optimized sound fields from the receiver’s pre-programmed sound fields. SOUND FIELD +/– You cannot select “A. DIRECT” when you select GAME and USB as input. Auto Format Direct (A.F.D.) mode The Auto Format Direct (A.F.D.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Right x HD-D.C.S. x HALL (Hall) HD Digital Cinema Sound (HD-D.C.S.) is Sony’s new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on precise response measurement data of a mastering studio. With HD-D.C.S.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm When headphones are connected You can only select this sound field if the headphones are connected to the receiver. x HP 2CH (HP (2CH)) This mode is selected automatically if you use headphones (except “A. DIRECT”). Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channels except LFE signals.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Right Digital audio formats supported by the receiver Digital audio formats that this receiver can decode depend on digital audio output jacks of the equipment connected. This receiver supports the following audio formats. Audio format Maximum number of channels Connection between the playback equipment and the receiver COAXIAL/OPTICAL HDMI 5.1 a a Dolby Digital EX 6.1 a a Dolby Digital Plus 7.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Left Using the SOUND OPTIMIZER Resetting sound fields to the default settings The Sound Optimizer lets you enjoy clear and dynamic sound at low volume levels. It automatically calibrates the sound which cannot be heard well when you turn down the volume level. After Auto Calibration is performed, the sound level is optimized to suit your environment.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm “BRAVIA” Sync Features What is “BRAVIA” Sync? The “BRAVIA” Sync function allows communication between Sony products such as TV, Blu-ray Disc/DVD player, AV amplifier, etc. that supports the Control for HDMI function.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm If your TV is not compatible with the “Control for HDMI-Easy Setting” function GUI MODE V/v/b, MENU 1 Press GUI MODE. Press MENU if the GUI menu does not appear on the TV screen. masterpage: Left Notes • Before you perform the “Control for HDMI-Easy Setting” on your TV, be sure to turn on the TV and other connected equipment including the receiver first.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm Notes • Be sure that the System Audio Control function is set to on using TV menu. • Depending on the TV, the start of the content may not appear. • Depending on the settings, the receiver may not turns on when “Pass Through” is set to “AUTO” or “ON”. Tip You can also select a connected equipment, such as Blu-ray Disc/DVD player from the TV menu. The receiver and TV will automatically switch to the appropriate HDMI input.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm Enjoying movies with the optimum sound field (Theater/Theatre Mode Sync) Press THEATER or THEATRE on the remote control of the TV or the Blu-ray Disc player, while pointing the remote control towards the TV.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm Notes • Some audio input modes may not be set up based on the input. • When the USB input is selected, “------” appears on the display panel, and you cannot change to other modes. Select another input, then set the audio input mode. • When “A. DIRECT” is being used, audio input is set to “ANALOG”. You cannot select other modes. • The Audio Return Channel (ARC) function does not work in the following cases.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm Input name Assignable video input jacks Assignable audio input jacks BD/DVD GAME SAT/ CATV masterpage: Left VIDEO 1 VIDEO 2 MD/TAPE SA-CD/ CD COMP.1 a* a a a a a a COMP.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm Using a bi-amplifier connection 1 Press GUI MODE. masterpage: Right Using multi-zone features The Settings menu list appears on the TV screen. You can enjoy images and sounds from the equipment connected to the receiver in zone 2 other than the main zone. For example, you can watch the DVD in the main zone and listen to the CD in zone 2.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Left Making a zone 2 connection Outputs sound from speakers in zone 2 using the receiver and another amplifier.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm Operating the receiver from zone 2 The following operations are described for connecting an IR repeater and operating the receiver in zone 2. When an IR repeater is not connected, use this receiver in the main zone. ?/1 ZONE Input buttons SOURCE Turn on the main receiver (this receiver). 2 3 Turn on the receiver in zone 2.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm 3 Adjusting Settings masterpage: Left Select the menu item you want, then press . Example: When you select “Auto Cal.”. Using the Settings menu You can adjust various settings for speakers, surround effects, etc. using the Settings menu. To display the menu of the receiver on the TV screen, make sure that the receiver is in “GUI MODE” by following the steps in “To turn “GUI MODE” on and off” (page 41).
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Right 2 Select “Lvl”. Speaker Settings menu You can adjust each speaker manually. You can also adjust the speaker levels after the Auto Calibration is completed. Note The speaker settings are only for the current seating position. x SP Pattern (Speaker Pattern) Select “SP Pattern” according to the speaker system which you are using. Select the speaker pattern before you perform Auto Calibration.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm To adjust the size of each speaker You can adjust each speaker’s (front left/right, front left/right high, center, surround left/right, surround back left/right) size. 1 Select the speaker on the screen for which you want to adjust the size, then press . 2 Select “Size”. 3 Set the size of the selected speaker, then press .
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm When a test tone is not output from the speakers • The speaker cords may not be connected securely. Check to see if they are connected securely and cannot be disconnected by pulling on them slightly. • The speaker cords may have short-circuit problem. When a test tone is output from a different speaker than the speaker displayed on the TV screen The speaker pattern set up is incorrect.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm • Theater: Theater type (default setting) mixes reflection and reverberation sound creating the characteristics of a mastering studio. Additionally, this type mixes in frequency characteristics that are often found in professional studios and movie theaters. It is ideal for watching movies in a listening room that has less reverberation.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Right Notes x Pass Through • This function is useful when you use a large LCD or plasma monitor or a projector. • This function does not work when “A. DIRECT” is being used. Lets you output the HDMI signals to the TV even when the receiver is in standby mode. • ON: When the receiver is in the standby mode, the receiver continuously outputs HDMI signals from the receiver’s HDMI TV OUT jack.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm • TV+AMP: The sound is output from TV’s speaker and the speakers connected to the receiver. Notes • The sound quality of the playback equipment depends on the TV’s sound quality, such as the number of channels, and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the receiver is also in stereo as that of the TV, even if you play back multi channel source.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Right Using the menu in the display panel Press GUI MODE repeatedly to select “GUI OFF”. The receiver is switched to front panel display mode. 1 2 3 Press AMP. Press MENU. Press V/v repeatedly to select the menu you want, then press or b. 4 Press V/v repeatedly to select the parameter you want to adjust, then press or b. 5 Press V/v repeatedly to select the setting you want, then press .
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Left Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 75.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm Menu [Display] masterpage: Right Parameters [Display] Settings Default setting Surround speakers sizeb) [SUR SIZE] LARGE, SMALL LARGE Front high speakers sizeb) [FH SIZE] LARGE, SMALL LARGE Surround back speaker assignd) [SB ASSIGN] SPK B, BI-AMP, OFF OFF Front left speaker distanceb) [FL DIST.] FL 1.00 m to FL 10.00 m (FL 3’3” to FL 32’9”) (0.1 m (1 inch) interval)e) FL 3.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB05ENJ_STRDH820-CEL.fm masterpage: Right a) You can only select this parameter after you have performed Auto Calibration. on the speaker pattern setting, some parameters or settings may not be available. c) xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW). d) You can only select this parameter if “SP PATTERN” is not set to a setting with surround back or front high speakers (page 34).
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB06REM_STRDH820-CEL.fm To view the information on the display panel The display panel provides various information of the receiver status such as sound field. 1 Select the input for which you want to masterpage: Left Using the Remote Control Programming the remote control check the information. 2 Press AMP, then press DISPLAY repeatedly. Each time you press DISPLAY, the display will change cyclically as follows.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB06REM_STRDH820-CEL.fm 3 Press the numeric buttons to enter the numeric code. If more than one code exists, try to enter either one which corresponds to the equipment including TV. Use the tables on page 81–84 to find the numeric code(s) corresponding to the equipment. Note Only the codes in the 500’s are valid for the TV button. 4 Press ENT/MEM.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB06REM_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB06REM_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB06REM_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm Resetting the remote control masterpage: Right Additional Information Precautions AV ?/1 ?/1 On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources MASTER VOL –/ 2– 1 While holding down MASTER VOL – or 2 –, press and hold ?/1, then press AV ?/1. The RM SET UP indicator flashes 3 times.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm masterpage: Left On placement • Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. • Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. • Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm There is no sound from a specific equipment. • Check that the equipment is connected correctly to the audio input jacks for that equipment. • Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the equipment. • Check the INPUT MODE (page 62). • Check the setting of “Audio Out” in the HDMI Settings menu (page 73).
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm There is no sound, no matter which equipment is selected, or only a very low-level sound is heard. • Check that all connecting cords are inserted to their input/output jacks for the respective jacks of the receiver, speakers and the equipment. • Check that both the receiver and all equipment are turned on. • Check that MASTER VOLUME control is not set to “VOL MIN”.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm • When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver. In this case, select “AMP”. • If you cannot listen to the sound of the equipment connected to the receiver while TV input is selected on the receiver – Be sure to change the input of the receiver to HDMI when you want to watch a program on the equipment connected via HDMI connection to the receiver.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm Tuner The FM reception is poor. • Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antennas (aerial) as shown below. masterpage: Left The RDS information that you want does not appear.* • The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm USB device Are you using a supported USB device? • If you connect an unsupported USB device, the following problems may occur. See “Compatible USB devices” (page 48) for the supported device types. – The USB device is not recognized. – File or folder names are not displayed on this receiver. – Playback is not possible. – The sound skips. – There is noise. – A distorted sound is output.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm • The number of folders has exceeded 100 (including “ROOT” folder). • The number of files in a folder has exceeded 100. • Files that are encrypted or protected by passwords, etc. cannot be played back. * This unit supports FAT16 and FAT32, but some USB device may not support all of these FAT. For details, refer to the operating instruction of each USB device or contact the manufacturer.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm USB FAIL An over current from the (USB) port was detected. The receiver will automatically turn off after a few seconds. Check the iPhone/iPod or USB device, then unplug it and turn on the power again.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB07ADD_STRDH820-CEL.fm masterpage: Right General Power requirements Area Power requirements USA, Canada, Taiwan 120 V AC, 60 Hz Europe, Australia 230 V AC, 50/60 Hz Power consumption 240 W Power consumption (during standby mode) 0.3 W (When “Ctrl for HDMI” is set to “OFF”) Dimensions (width/height/depth) (Approx.) 430 mm × 158 mm × 322.6 mm (17 in × 6 1/4 in × 12 3/4 in) including projecting parts and controls Mass (Approx.) 8.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB01COV_STRDH820-CELIX.fm masterpage: Left Index Numerics D M 2 channel 54 5.1 channel 19 7.1 channel 19 DCAC (Digital Cinema Auto Calibration) 36 Direct Tuning 51 Display panel 10 Distance Unit 71, 77 Dolby Digital EX 57 Dual Mono 73, 78 DVD player 27 DVD recorder 30 Dynamic range compression 71, 76 Manual Setup 69 Menu 68, 76 Message Auto Calibration 40 Error 92 Movie mode 54 Multi zone 65 Music mode 55 Muting 44 A A.F.D.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB01COV_STRDH820-CELIX.
D:\NORM'S JOB\SONY HA\SO0129\STR-DH820_PMRF_01\4266497112_GB\GB01COV_STRDH820-CELIX.
