filename[D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB01COV_STR-DH130-U2.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB02REG_STR-DH130U2.fm4-294-472-11(1) masterpage: Left For customers in the United States WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB02REG_STR-DH130U2.fm 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB02REG_STR-DH130U2.fm4-294-472-11(1) Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB01COV_STR-DH130U2TOC.fm masterpage: Right Table of Contents About This Manual........................................4 Supplied accessories......................................6 Description and location of parts...................7 Getting started .............................................13 Connections Additional Information Precautions.................................................. 29 Troubleshooting ........................................
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB01COV_STR-DH130U2TOC.fm Supplied accessories • Operating Instructions (this manual) • Quick Setup Guide • FM wire antenna (aerial) (1) masterpage: Left Inserting batteries into the remote control Insert two R6 (size AA) batteries (supplied) by matching 3 and # on the batteries to the diagram inside the battery compartment of the remote control.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB03DES_STR-DH130U2.fm masterpage: Right Description and location of parts Front panel 1 qd 2 3 qs 4 qa 5 0 6 9 8 7 Indicators on the display panel qg qf SP A SP B MEMORY RDS MONO SLEEP ST qh B SPEAKERS (OFF/A/B/A+B) (page 14, 19) H DIMMER Adjusts the brightness of the display panel in 3 levels.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB03DES_STR-DH130U2.fm masterpage: Left N SP A/SP B Lights up according to the speaker system used (page 19). However, these indicators do not light up if the speaker output is turned off or if headphones are connected. O SLEEP Lights up when the Sleep Timer is activated (page 11). P Tuning indicators Lights up when the receiver tunes to a radio station. MEMORY A memory function, such as Preset Memory (page 24), etc., is activated.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB03DES_STR-DH130U2.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB03DES_STR-DH130U2.fm To control the receiver Remote control Use the supplied remote control to operate this receiver and other equipment. The remote control is assigned to operate Sony audio/ video equipment. You can reassign the input button to match the equipment connected to your receiver (page 27).
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB03DES_STR-DH130U2.fm V SLEEP Sets the receiver to turn off automatically at a specified time. Each time you press this button, the display changes cyclically as follows. 0-30-00 t 1-00-00 t 1-30-00 t 2-00-00 t OFF When Sleep Timer is being used, “SLEEP” indicator lights up in the display panel. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display panel.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB03DES_STR-DH130U2.fm masterpage: Left To control other Sony equipment Name Blu-ray Disc, DVD player Satellite tuner, VCR Cable TV tuner CD player MD deck, Tape deck Power Power Powerc) A AV ?/1a) Power Power E POP UP/MENU Menu – – – – F TOP MENU On-screen guide – – – – H ENTER/MEMORY Enter Enter Enter Enter – J TOOLS/OPTIONS Options menu Options menu – – – M MENU/HOME Menu Menu Menu – – N .
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130U2.fm Getting started Installing and connecting the speakers (page 13, 14) Connecting the audio/video equipment (page 14, 16) Connections 1: Installing the speakers This receiver allows you to use a 2.0 channel system. Example of speaker system configuration Left speaker Right speaker Preparing the receiver See “5: Connecting the AC power cord (mains lead)” (page 18) and “Initializing the receiver” (page 18).
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130U2.fm 2: Connecting the speakers masterpage: Left 3: Connecting the audio/ video equipment Before connecting the cords, be sure to disconnect the AC power cord (mains lead). Connecting the audio equipment Before connecting cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130U2.fm masterpage: Right Notes Connections • When listening to a equipment connected to the PORTABLE IN jack, sound may be distorted or interrupted. This is not a malfunction and will depend on the connected equipment. • If the sound from the equipment connected to the PORTABLE IN jack is very soft, you may increase the volume level.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130U2.fm masterpage: Left Connecting the video equipment Before connecting cords, be sure to disconnect the AC power cord (mains lead). Blu-ray Disc player, DVD player Video signals Audio signals To the VIDEO IN jack of the TV. A A To the VIDEO IN jack of the TV. Video signals Audio signals Satellite tuner, Cable TV tuner A To the VIDEO IN jack of the TV.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130U2.fm masterpage: Right Notes 4: Connecting the antennas (aerials) Before connecting antennas (aerials), be sure to disconnect the AC power cord (mains lead). FM wire antenna (aerial) (supplied) AM loop antenna (aerial) (supplied) Notes • To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other equipment. • Be sure to fully extend the FM wire antenna (aerial).
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130U2.fm 5: Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. AC power cord (mains lead) masterpage: Left Preparing the Receiver Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to revert back to the factory default settings.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB04CON_STR-DH130U2.fm Selecting the speaker system Adjusting the tone You can adjust the tonal quality of the speakers. BASS +/– TREBLE +/– SPEAKERS (OFF/A/B/A+B) Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the speaker system you want to drive.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB05BAS_STR-DH130U2.fm masterpage: Left To activate the muting function Press MUTING. The muting function will be canceled when you do the following. • Press the button again. • Increase the volume. • Turn off the receiver. Basic Operations Playback Input buttons To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. AMP MENU MUTING , V/v/B/b 1 Turn on the connected equipment.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB05BAS_STR-DH130U2.fm If you made a mistake Press B/b until the character you want to change flashes, then press V/v to select the correct character. 5 Press . The name you entered is registered. When receiving RDS broadcasts (Europe model only) Program Service name or preset station name* t Frequency, band and preset number t Volume level * Index name appears only when you have assigned one to the input or preset station (page 20, 25).
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB05BAS_STR-DH130U2.fm Recording using the receiver You can record sound from an audio/video equipment using the receiver. Refer to the operating instructions supplied with your recording equipment. 1 Press the input button which corresponds to the playback equipment. You can also use INPUT SELECTOR on the receiver. 2 Prepare the playback equipment for playing. For example, insert the CD you want to copy into the CD player.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB05BAS_STR-DH130U2.fm Tuning to a station automatically (Automatic Tuning) 1 2 Press TUNER repeatedly to select the FM or AM band. Tuning to a station directly (Direct Tuning) You can enter the frequency of a station directly by using the numeric buttons. 1 Press TUNING + or TUNING –. TUNING + scans from lower to higher frequency stations and TUNING – for scanning higher to lower. The receiver stops scanning whenever a station is received.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB05BAS_STR-DH130U2.fm Changing the AM tuning scale masterpage: Left (USA and Canada models only) Presetting FM/AM radio stations You can change the AM tuning scale to either 9 kHz or 10 kHz using the buttons on the receiver. (Preset Tuning) ?/1 You can store up to 30 FM and 30 AM stations as your favorite stations as preset stations. TUNER TUNING MODE 1 Press ?/1 to turn off the receiver. 2 While holding down TUNING MODE, press ?/1.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB05BAS_STR-DH130U2.fm 5 Press Naming preset stations . The station is stored as the selected preset number. 6 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Tune to the preset station you want to create an index name for (page 25). 3 4 Press AMP MENU. 1 2 3 4 5 30 29 28 ... Press V/v repeatedly to select “NAME IN”, then press or b.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130U2.fm Receiving RDS broadcasts masterpage: Left Menu Operations Using the setting menu (Europe model only) This receiver allows you to use Radio Data System (RDS), which enables radio stations to send additional information along with the regular programming signal. This receiver offers convenient RDS features, such as Program Service name display. RDS is available only for FM stations.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130U2.fm Overview of the menus masterpage: Right Using the Remote Control x BALANCE (Speaker balance) Lets you adjust the balance between left and right speakers. You can adjust from BAL. L+10 to BAL. R+10 in 1dB/step. The initial setting is BAL. 0. x NAME IN (Naming) Lets you set the name of inputs and preset stations. For details, see “Naming inputs” (page 20) and “Naming preset stations” (page 25). x AUTO.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130U2.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130U2.fm masterpage: Right On placement Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources On heat buildup On operation Before connecting other equipment, be sure to turn off and unplug the receiver.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130U2.fm Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Power The receiver is turned off automatically. • “AUTO.STBY” is set to “STBY ON” (page 27).
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130U2.fm The left and right sounds are unbalanced or reversed. • Check that the speakers and equipment are connected correctly and securely. • Adjust the speaker balance (page 27). There is severe hum, interrupted noise or distortion from the equipment connected to the PORTABLE IN jack. • Check that the equipment are connected securely. • This is not a malfunction and will depend on the connected equipment. Recording cannot be carried out.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130U2.fm Remote control masterpage: Left Specifications The remote control does not function. • Point the remote control at the remote control sensor on the receiver. • Remove any obstacles in the path between the remote control and the receiver. • Replace all the batteries in the remote control with new ones, if they are weak. • Make sure you select the correct input on the remote control.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB06REM_STR-DH130U2.fm Tone Gain levels masterpage: Right ±10 dB, 1 dB step 2) INPUT SHORT (with BASS = 0 dB, TREBLE = 0 dB). 3) Weighted network, input level. FM tuner section Tuning range 87.5 MHz – 108.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB01COV_STR-DH130U2IX.fm masterpage: Left Index A S AUTO.
D:\NORM'S JOB\SONY HA\SO0173\STR-DH130\4294472111_GB\GB01COV_STR-DH130U2IX.
