filename[D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US01COV_STR-DA1500ES-U.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US02REG_STR-DA1500ES-U.fm4-129-743-11(1) WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US02REG_STR-DA1500ES-U.fm 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US02REG_STR-DA1500ES-U.fm4-129-743-11(1) masterpage: Left About This Manual • The instructions in this manual are for model STR-DA1500ES. Check your model number by looking at the lower right corner of the front panel. In this manual, models of area code UC is used for illustration purposes unless stated otherwise. Any difference in operation is clearly indicated in the text, for example, “Models of area code UC only”.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US01COV_STR-DA1500ES-UTOC.fm masterpage: Right Table of Contents Description and location of parts .................. 6 Getting Started 1: Installing the speakers............................. 13 2: Connecting the speakers ......................... 13 3a: Connecting the audio components ........ 14 3b: Connecting the video components ........ 15 4: Connecting the antennas (aerials) ........... 19 5: Preparing the receiver and the remote....
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Right Name Function Name Function A ?/1 (on/standby) Press to turn the receiver on or off (page 20, 30). O FM MODE B SPEAKERS (OFF/A/B/ A+B) Switch to OFF, A, B, A+B of the front speakers (page 21). Press to select the FM monaural or stereo reception (page 29). P FM/AM Press to select FM or AM station. C TONE MODE Adjust the bass and treble level of the speakers.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Left Rear panel A ANTENNA section FM ANTENNA jack Connects to the supplied FM wire antenna (aerial) (page 19). AM ANTENNA jack Connects to the supplied AM loop antenna (aerial) (page 19). XM jack Connects to the XM Mini-Tuner and Home Dock (not supplied) (page 34). SIRIUS jack Connects to a SiriusConnect Home tuner (not supplied) (page 34).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm G VIDEO/AUDIO INPUT/OUTPUT section AUDIO IN/ White (L) OUT jacks Connects to a VCR, DVD player, etc. (page 16–18). Red (R) Yellow VIDEO IN/ OUT* jacks AUDIO OUT Connects to the component in zone jacks VIDEO OUT 2 (page 49).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Left Name Function Name Function A TV ?/1 (on/standby) Press TV ?/1 and TV (P) at the same time to turn the TV on or off. F BD/DVD MENU AV ?/1 (on/standby) Press to turn on or off the Sony audio/video components that the remote is assigned to operate (page 51). If you press ?/1 (B) at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm Name O ./>b) masterpage: Right Function Name Function Press to skip a track of the CD player, DVD player, DVD recorder, MD deck, tape deck or Blu-ray disc player. P TV Press TV and the button with orange printing at the same time to enable TV operation. Q RETURN/ EXIT O Press to – return to the previous menu.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Left a) Name Function T -/-- Press to select the channel entry mode, either one or two digit of the VCR, satellite tuner, etc. Press -/-- and TV (P) at the same time to select the channel entry mode, either one or two digits of the TV. >10/- Press to select – track numbers over 10 of the VCR, satellite tuner, MD deck or CD player. – channel numbers of the Digital CATV terminal.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm 1: Installing the speakers This receiver allows you to use a 2.0 channel system. 2: Connecting the speakers Before connecting the cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Left . 3a: Connecting the audio components MD deck, Tape deck Connecting a Super Audio CD player, CD player, MD deck, Tape deck or Turntable A The following illustration shows how to connect a Super Audio CD player, CD player, MD deck, tape deck or turntable. Before connecting the cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Right Getting Started 3b: Connecting the video components How to connect your components This section describes how to connect your video components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect each component. Before connecting the cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Left If you connect a DVD player Connecting a Blu-ray disc player, DVD player The following illustration shows how to connect a Blu-ray disc player or a DVD player. Connect audio and video cords according to the jacks of your components. • Be sure to change the factory setting of the BD/DVD input button on the remote so that you can use the button to control your DVD player.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Right Getting Started Connecting a satellite tuner, Set-top box The following illustration shows how to connect a satellite tuner or a Set-top box. Connect audio and video cords according to the jacks of your components.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Left Connecting components with analog video and audio jack The following illustration shows how to connect a component which has analog jacks such as a DVD recorder, VCR, etc. Connect audio and video cords according to the jacks of your components.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm Connect the supplied AM loop antenna (aerial) and FM wire antenna (aerial). Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US03CON_STR-DA1500ES-U.fm masterpage: Right Getting Started 6: Selecting the speaker system You can select the front speakers you want to drive. Be sure to use the buttons on the receiver for this operation. SPEAKERS (OFF/A/B/A+B) Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the speaker system you want to drive.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US04PLA_STR-DA1500ES-U.fm masterpage: Left Playback Enjoying sound/images from the component connected to the receiver Input buttons AMP MENU 1 MASTER VOL +/– Components that can be played back MD/TAPE [MD/TAPE] MD deck, tape deck, etc., connected to MD/TAPE jack PHONO [PHONO] Turntable, etc., connected to the PHONO jack SA-CD/CD [SA-CD/CD] Super Audio CD, CD player, etc.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US04PLA_STR-DA1500ES-U.fm masterpage: Right To activate the muting function If you made a mistake Press MUTING. The muting function will be canceled when you do the following. • Press MUTING again. • Increase the volume. • Turn off the receiver. Press B/b until the character you want to change flashes, then press V/v to select the correct character.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US05AMP_STR-DA1500ES-U.fm masterpage: Left 6 Amplifier Operations Press V/v repeatedly to select the setting you want. The setting is entered automatically. Navigating through menus To return to the previous display By using the amplifier menus, you can make various adjustments to customize the receiver. Press B. To exit the menu Press AMP MENU. Note Some parameters and settings may appear dimmed on the display.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US05AMP_STR-DA1500ES-U.fm masterpage: Right Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 24. Parameters [Display] Settings Initial setting LEVEL [1-LEVEL] (page 26) Front speaker balancea) [FRT BAL] BAL. L +1 to BAL. L +10, BALANCE, BAL. R +1 to BAL.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US05AMP_STR-DA1500ES-U.fm masterpage: Left Adjusting the level Adjusting the equalizer (LEVEL menu) (EQ menu) You can use the LEVEL menu to adjust the balance of front speakers. Select “1-LEVEL” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 24) and “Overview of the menus” (page 25). You can use the EQ menu to adjust the tonal quality (bass/treble level) of the front speakers.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US05AMP_STR-DA1500ES-U.fm Settings for the tuner (TUNER menu) TUNER menu parameters x FM MODE (FM station receiving mode) x CODE EDT. (Sirius lock code edit) Lets you change the lock code. For details, see “To change the lock code” (page 40). x SR ANT (Sirius antenna aiming mode) This parameter helps you to aim the SIRIUS antenna for optimal signal reception. For details, see “Checking receiving conditions (Antenna Aiming)” (page 35).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US05AMP_STR-DA1500ES-U.fm masterpage: Left Tips Settings for the system (SYSTEM menu) You can use the SYSTEM menu to customize the settings of the receiver. Select “4-SYSTEM” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 24) and “Overview of the menus” (page 25). SYSTEM menu parameters x NAME IN (Naming inputs) Lets you set the name of inputs.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm masterpage: Right Tuning into a station automatically (Auto Tuning) Tuner Operations Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the receiver (page 19). Tip Area code FM AM UC 100 kHz 10 kHz* * The AM tuning scale can be changed (page 30).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm Tuning into a station directly (Direct Tuning) Enter the frequency of a station directly by using the numeric buttons. 1 Press TUNER repeatedly to select the FM or AM band. masterpage: Left Changing the AM tuning scale (Model of area code UC only) You can change the AM tuning scale to either 9 kHz or 10 kHz using the buttons on the receiver. ?/1 You can also use FM/AM on the receiver. 2 3 Press D.TUNING.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm Presetting radio stations masterpage: Right 4 You can also press PRESET + or PRESET – to select a preset number. If “MEMORY” goes out before you select the preset number, start again from step 3. You can preset up to 30 FM stations and 30 AM stations. Then you can easily tune in the stations you often listen to.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm masterpage: Left Naming preset stations 1 Press TUNER repeatedly to select the FM or AM band. You can also use FM/AM on the receiver. 2 Tune in the preset station you want to create an index name for (page 31). 3 Press AMP MENU. “1-LEVEL” appears on the display. 4 Press V/v repeatedly to select “3-TUNER”. 5 Press menu. 6 Press V/v repeatedly to select “NAME IN”. 7 Press or b to enter the parameter.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm Listening to Satellite Radio To listen to Satellite Radio, you’ll need to connect either a SIRIUS or XM Satellite Radio tuner (sold separately) to your satellite-ready receiver. Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada. To subscribe to SIRIUS, U.S. and Canadian customers can call 1-888-539-SIRI (1-888539-7474) or visit sirius.com (US) or siriuscanada.ca (Canada).
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm Connecting a satellite radio tuner SIRIUS jack masterpage: Left Preparing to listen to a satellite radio XM jack TUNER AMP MENU , V/v/B/b To connect to the XM jack TUNING +/– Before operating the system, connect the XM Mini-Tuner and Home Dock to the XM jack.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm 7 masterpage: Right If you cannot read the characters or numbers on the display, refer to the following table. Press b. The last 6 digits appear on the display. 8 Check the XM Radio ID or Sirius Radio ID on the display and write it in the space provided here.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm 6 Press or b to enter the parameter. 7 While checking the parameter, aim your antenna to where the best reception will be received. masterpage: Left Receiving satellite radio broadcasts 1 For details on the parameter, see “XM Signal Strength” or “SIRIUS Signal Strength” below. Signal strength You can also use INPUT SELECTOR on the receiver.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm Selecting a channel of the satellite radio masterpage: Right 2 • ALL CAT: You can select a channel from all the categories. The initial setting is “ALL CAT”. • ONE CAT: You can select a channel from one category. “CAT” is displayed on the display when you set to “ONE CAT” mode. TUNER Numeric buttons 3 D.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm Selecting channels by inputting the channel number directly (DIRECT TUNING) 1 Press TUNER repeatedly to select “XM RADIO” or “SIRIUS”. masterpage: Left Presetting satellite radio channels You can select the channels you want directly by presetting them using the preset numbers. You can preset up to 30 XM Radio channels and 30 SIRIUS Satellite Radio channels. You can also use INPUT SELECTOR on the receiver.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm 3 Press MEMORY. You can also use MEMORY/ENTER on the receiver. 4 Press the numeric buttons to select a preset number. You can also select the number by pressing PRESET + or PRESET –. You can also turn TUNING + or TUNING – on the receiver. Preset channels from 1 to 30 are available, and channel 1 is preset for all the preset channels when you purchase the receiver. Press ENTER.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm Restricting access to specific channels masterpage: Left 5 Press menu. 6 Press V/v repeatedly to select “PARENTAL”. 7 Press or b to enter the parameter. 8 Press V/v repeatedly to select “ON” then press . (Parental Lock) (SIRIUS only) You can restrict access to certain channels using your own lock code. The lock code is set to “0000” as the default.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm 9 Reenter the new lock code with the numeric buttons. “CHANGED” appears on the display. To listen to the locked channels 1 Press TUNER repeatedly to select “SIRIUS”. You can also use INPUT SELECTOR on the receiver. 2 Select a locked channel you want to listen using Direct Tuning (page 38). “LOCKED” appears on the display. masterpage: Right 10Enter your 4-digit lock code using the numeric buttons.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm masterpage: Left XM Radio messages list Message appears Explanation Remedies ANTENNA Check that the XM antenna is connected to the XM MiniThe XM antenna is not Tuner Dock securely and check the antenna cable for connected to the XM MiniTuner Dock or the XM antenna damage. Replace the XM antenna if the cable is damaged. cable is damaged.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US06TUN_STR-DA1500ES-U.fm masterpage: Right SIRIUS Satellite Radio message list Explanation Remedies ANTENNA ERROR* The antenna is not connected properly. Check the connection between the SiriusConnect Home tuner and the antenna. LINKING The receiving condition is not good. Try moving the antenna to another location. For details about the antenna location, refer to the instructions supplied with the SiriusConnect Home tuner.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm masterpage: Left Other Operations Enjoying the DIGITAL MEDIA PORT (DMPORT) The DIGITAL MEDIA PORT (DMPORT) allows you to enjoy sound and image from a network system such as a portable audio/video source or computer. By connecting a DIGITAL MEDIA PORT adapter (not supplied), you can enjoy sound and image from the connected component on the receiver.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm masterpage: Right Connecting the DIGITAL MEDIA PORT adapter You can listen to the sound and view the images from the component connected through the DIGITAL MEDIA PORT adapter to the DMPORT jack on the receiver.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm Listening/watching a connected component through DMPORT connection 1 Press DMPORT. You can also use the INPUT SELECTOR on the receiver to select “DMPORT”. 2 Start playback of the connected component. The sound is played back on the receiver and the image appears on the TV. For details, refer to the operating instructions supplied with the DIGITAL MEDIA PORT adapter.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP repeatedly while the power is on. Each time you press the button, the display changes cyclically as follows: 0-30-00 t 1-00-00 t 1-30-00 t 2-00-00 t OFF When sleep timer is being used, “SLEEP” lights up in the display.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm Recording onto a recording media 1 Press one of the input buttons to select the playback component. You can also use INPUT SELECTOR on the receiver. 2 Prepare the playback component for playing. For example, insert the video tape you want to copy into the VCR. 3 Prepare the recording component. Insert a blank video tape, etc. into the recording component (VIDEO) for recording.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm masterpage: Right Making a multi-zone operation Zone 2 connections Outputs sound from speakers in zone 2 using the receiver and another amplifier.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US07OTH_STR-DA1500ES-U.fm Operating the receiver from zone 2 The following operations are described for connecting an IR repeater and operating the receiver in zone 2. When an IR repeater is not connected, use this receiver in the main zone. masterpage: Left Tip Even when this receiver is in standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 remains turned on.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm Using the Remote masterpage: Right Categories and the corresponding buttons Categories Changing button assignments Press VCR (command mode VTR 3) 1 DVD player/DVD recorder (command mode DVD1)a) 2 You can change the factory settings of the input buttons to suit the components in your system.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm masterpage: Left On placement Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources • Before operating the receiver, check that the operating voltage is identical with your local power supply.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Audio There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for that component.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm There is no sound from the component connected to the DIGITAL MEDIA PORT adapter. • Adjust the volume of this receiver. • The DIGITAL MEDIA PORT adapter and/or component is not connected correctly. Turn off the receiver, then reconnect the DIGITAL MEDIA PORT adapter and/or component. • Check the DIGITAL MEDIA PORT adapter and/or component device to make sure it supports this receiver.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm The system cannot receive satellite channels at all. • The receiving condition is not good. Move the antenna to the place where the condition is good. • Check that you subscribed to the desired satellite radio service (page 33). Remote commander The remote does not function. • Point the remote at the remote sensor on the receiver. • Remove any obstacles in the path between the remote and the receiver.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code UC only) With 8 ohms loads, both channels driven, from 20 – 20,000 Hz; rated 95 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Models of area code UC1) Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz, THD 0.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US08REM_STR-DA1500ES-U.fm masterpage: Right Dimensions (w/h/d) (Approx.) 17 × 6 1/4 × 15 3/8 inches (430 × 157.5 × 388 mm) including projecting parts and controls Mass (Approx.) 19 lb 14 oz (9.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US01COV_STR-DA1500ES-UIX.
D:\NORM'S JOB\SONY HA\SO0040\STR-DA1500ES\U VERSION\US\4129743111\US09BKC_STR-DA1500ES-U.
