filename[D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CEL.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB02REG_STR-DN2010-CEL.fm4-182049-11(1) masterpage: Left For customers in the United States WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB02REG_STR-DN2010-CEL.fm 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13)Unplug this apparatus during lightning storms or when unused for long periods of time. 14)Refer all servicing to qualified service personnel.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB02REG_STR-DN2010-CEL.fm4-182049-11(1) Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB02REG_STR-DN2010-CEL.fm masterpage: Right iPod is a trademark of Apple Inc., registered in the U.S. and other countries. All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CELTOC.fm masterpage: Left Table of Contents About This Manual........................................4 Supplied accessories......................................8 Description and location of parts...................9 Getting started .............................................18 Connections 1: Installing the speakers .............................19 2: Connecting the speakers ..........................21 3: Connecting the TV .................
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CELTOC.fm masterpage: Right “BRAVIA” Sync Features Adjusting Settings What is “BRAVIA” Sync? .......................... 89 Preparing for the “BRAVIA” Sync ............. 90 Playing back components with one-touch operation (One-Touch Play)................... 91 Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) ......................... 92 Turning off the receiver with the TV (System Power-Off) ............
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CELTOC.fm Supplied accessories • • • • • • • Operating Instructions (this manual) Quick Setup Guide GUI Menu List Software License Information (1) Setup Manager CD-ROM (1) VAIO Media plus CD-ROM (1) FM wire antenna (aerial) (1) masterpage: Left Inserting batteries into the remote Insert two R6 (size-AA) batteries in the RM-AAP055 (USA model only) or RM-AAP056 (European model only) Remote Commander.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm masterpage: Right Description and location of parts Front panel 1 qh 2 qg 3 4 qf A ?/1 (on/standby) Turns the receiver on or off (page 39, 63, 77). B Remote sensor Receives signals from remote commander. C White indicator Lights up when the receiver is turned on. D MULTI CHANNEL DECODING indicator Lights up when multi channel audio signals are decoded (page 139).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm masterpage: Left Indicators on the display 1 2 LH SW RH L C R SL S SR 3 4 5 6 7 8 ARC D + EX TrueHD NEO 6 PL ll x z ANALOG HDMI COAX OPT S –AIR EQ RDS CAT MEM DTS – HD MSTR HI RES LBR LF E D.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm masterpage: Right Indicator and explanation Indicator and explanation J SLEEP Lights up when the Sleep Timer is activated. Q Playback channel indicators The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speaker settings). K LPCM Lights up when the receiver is decoding the Linear PCM signals.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm masterpage: Left Rear panel 1 COMPONENT VIDEO 9 2 1 2 3 4 5 ASSIGNABLE (INPUT ONLY) 7 8 7 A DIGITAL INPUT/OUTPUT section OPTICAL IN jacks (page 23, 29, 30, 31) 6 E S-AIR section (page 36) EZW-T100 slot CAUTION (with cover) Please do not remove the slot cover until you want to install the wireless transmitter.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm H VIDEO/AUDIO INPUT/OUTPUT section (page 29, 31, 32) White (L) AUDIO IN/OUT jacks Red (R) Yellow VIDEO IN/OUT* jacks I COMPONENT VIDEO INPUT/ OUTPUT section (page 23, 29, 30, 31) Green (Y) Blue (PB/CB) Y, PB/CB, PR/CR IN/OUT* jacks masterpage: Right Remote commander You can use the supplied remote to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm Name and function A ?/1 (on/standby) Turns the receiver on or sets it to the standby mode. Saving the power in standby mode When “Control for HDMI” (page 90), “Network Standby” (page 120) and “S-AIR Standby” (page 102) are set to “OFF”. B AV ?/1a) (on/standby) Turns on or off the audio/video components that the remote is programmed to operate. To turn the TV on or off, press TV (W) and then press AV ?/1.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm Name and function K masterpage: Right Name and function TV CH +/–a)b) (RM-AAP055 only) PROG +/–a)b) (RM-AAP056 only) P DISC SKIPa) Skips disc when using a multi-disc changer. Press TV (W), then press TV CH +/– or PROG +/– to select preset TV channels. Q RETURN/EXIT Oa) Returns to the previous menu or exits the menu while the menu or on-screen guide is displayed on the TV screen.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.fm masterpage: Left a) See the table on page 17 for information on the buttons that you can use to control each component. b) The following buttons have tactile dots. Use the tactile dots as reference when operating the receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB03DES_STR-DN2010-CEL.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left Getting started You can enjoy your audio/video components connected to the receiver by following the simple steps below. Installing and connecting the speakers See “1: Installing the speakers” (page 19) and “2: Connecting the speakers” (page 21). Checking the connection appropriate for your components Connecting the TV and video components COMPONENT VIDEO The image quality depends on the connecting jack.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right 1: Installing the speakers This receiver allows you to use a 7.1 channel system (7 speakers and one subwoofer). Example of speaker system configuration 5.1 channel speaker system To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer (5.1 channel). 7.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left Tips • When you connect a 7.1 channel speaker system with two surround back speakers, all angle A should be the same. • When you connect a 7.1 channel speaker system with two front high speakers, place the front high speakers – at an angle between 22° to 45°. – at least 3.3 feet (1 meter) directly above the front speakers. • When you connect a 6.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right 2: Connecting the speakers Connections Before connecting cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm * Notes on the SPEAKERS SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals connection. – If you connect only one surround back speaker, connect it to L of this terminals. – If you are not using surround back speaker or front high speakers, and you have an additional front speaker system, connect the additional front speaker system to this terminals. Set “Sur Back Assign” to “SPEAKER B” in the Speaker Settings menu (page 41).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right 3: Connecting the TV TV with an HDMI jack Audio signals Audio/video signals A* C Video signals ** B D or ARC E Audio signals A or TV without an HDMI jack A Optical digital cord (not supplied) B HDMI cable (not supplied) Recommended connection Alternative connection Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm * If you connect the receiver to the ARC compatible TV’s HDMI jack via an HDMI cable, you do not need to connect the TV to the receiver with the optical digital cord. **If you connect the receiver to the ARC compatible TV, the TV sound will output from the speakers connected to the receiver via the HDMI TV OUT jack. In this case, set “Control for HDMI” to “ON” in HDMI Settings menu (page 90).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right 4a: Connecting the video components Connections Connecting components with HDMI jacks HDMI is the abbreviated name for HighDefinition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. By connecting Sony “BRAVIA” Synccompatible components using HDMI cables, operations can be simplified. See ““BRAVIA” Sync Features” (page 89).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Satellite tuner, Cable TV tuner DVD player, DVD recorder Audio/video signals Audio/video signals A masterpage: Left Blu-ray Disc player Audio/video signals A A A Audio/video signals “PlayStation 3” A Audio/video signals ARC TV, etc.* A HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable. * For details on the audio connection of TV to the receiver, see page 23.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Notes on connecting cables Notes on HDMI connections • An audio signal input to the HDMI IN jack is output from the SPEAKERS terminals, HDMI TV OUT jack and PHONES jack. It is not output from any other audio jacks. • Video signals input to the HDMI IN jack can only be output from the HDMI TV OUT jack. The video input signals cannot be output from the VIDEO OUT jacks or MONITOR OUT jacks.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left Connecting components without HDMI jacks Connect your video components according to the table below. Component Page Blu-ray Disc player 29 DVD player 30 DVD recorder 30, 32 Satellite tuner, Cable TV tuner 31 VCR 32 Camcorder, video game, etc. 32 If you want to connect several digital components, but cannot find an unused input See “Enjoying the sound/images from other inputs (Input Assign)” (page 104).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left To connect a DVD player, DVD recorder DVD player, DVD recorder Video signals Audio signals or A B* A Component video cord (not supplied) B Optical digital cord (not supplied) C Coaxial digital cord (not supplied) C Recommended connection Alternative connection * When you connect a component equipped with an OPTICAL jack, set “Input Assign” in the Input Option menu (page 104).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right To connect a satellite tuner, cable TV tuner Video signals Audio signals or A Connections Satellite tuner, Cable TV tuner or B C A Component video cord (not supplied) B Video cord (not supplied) C Audio cord (not supplied) D Optical digital cord (not supplied) D Recommended connection Alternative connection Note The initial setting of the COMPONENT VIDEO IN 3 jacks are satellite tuner or cable TV tuner.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left To connect components with analog video and audio jack The following illustration shows how to connect a component which has analog jacks such as a DVD recorder, VCR, etc.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right Function for conversion of video signals OUTPUT jack INPUT jack HDMI TV OUT COMPONENT VIDEO MONITOR OUT MONITOR VIDEO OUT HDMI IN* a – – VIDEO IN a a a COMPONENT VIDEO IN a a a a : Video signals are output. – : Video signals are not output. * HDMI video signals cannot be converted to component video signals and video signals.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left 4b: Connecting the audio components The following illustration shows how to connect a Super Audio CD player, CD player, CD recorder and DIGITAL MEDIA PORT adapter. Before connecting cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm 1 2 5: Connecting the antennas (aerials) Connect the supplied AM loop antenna (aerial) and FM wire antenna (aerial). Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead). FM wire antenna (aerial) (supplied) Press and hold both sides of the connector and then pull out the connector.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left Notes 6: Inserting the wireless transmitter/transceiver To use the S-AIR function, you need to insert the wireless transmitter (not supplied) into the S-AIR main unit (this receiver) and the wireless transceiver (not supplied) into the S-AIR sub unit. • Remove the screws on the slot cover pointed with g and G marks. Do not remove other screws. • The slot cover is no longer necessary. However, keep it after detaching.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Configuring your home network with DLNAcompliant devices. If your computer is connected to the Internet, you can connect this receiver to the Internet as well, through the wired LAN connection. Note LAN cable (CAT5) • We recommend that you use this type of cable for a wired LAN. Some flat-type LAN cables are easily affected by noise. We recommend that you use normal-type cables.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left Configuration example The following illustration is a configuration example of a home network with the receiver, a computer. We recommend that you use a wired connection. LAN cable (not supplied) Internet Modem Computer LAN cable (not supplied) Router Notes • An audio or video playback on the computer may occasionally be interrupted when you use a wireless connection.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm 8: Connecting the AC power cord (mains lead) Notes • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. • Connect the AC power cord (mains lead) firmly.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left To reboot the receiver If the buttons on the receiver or the remote do not work due to a malfunction of the receiver, reboot the receiver. 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 until the white indicator flashes. The receiver is rebooted. Setting the speakers Selecting the speaker pattern Select the speaker pattern according to the speaker system which you are using. 1 Press GUI MODE.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm 3 Press V/v repeatedly to select “Speaker”, then press . 1 Speaker Pattern OFF Test Tone D.Range Comp : 4 AUTO Press V/v repeatedly to select “Speaker Pattern”, then press . Speaker Pattern 2 The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select “Speaker”, then press . 4 Press V/v repeatedly to select “Sur Back Assign”, then press .
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Selecting the front speaker system You can select the front speakers you want to drive. Be sure to use the buttons on the receiver for this operation. SPEAKERS Press SPEAKERS repeatedly to select the front speaker system you want to drive. You can confirm the selected speakers terminals by checking the indicator on the display.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Before you perform Auto Calibration 1: Setting up the Auto Calibration Optimizer microphone Example of using surround back speakers 1 Select the speaker pattern (page 40). If you connect front high speakers, select the speaker pattern that has front high speakers (5/x.x or 4/x.x) each time you perform Auto Calibration. Otherwise, the characteristics of the front high speakers cannot be measured.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm On setting up the active subwoofer masterpage: Left 2: Performing Auto Calibration • When a subwoofer is connected, turn on the subwoofer and turn up the volume beforehand. Turn the LEVEL to just before the mid-point. • If you connect a subwoofer with a crossover frequency function, set the value to maximum. • If you connect a subwoofer with an auto standby function, set it to off (deactivated).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Press V/v repeatedly to select “Auto Calibration”, then press . 4 Press V/v repeatedly to select “Calibration Start”, then press . The screen on which you can select the item to be measured appears. Note If an error code appears on the screen, see “Message list after Auto Calibration measurement” (page 48). 7 Press V/v repeatedly to select the item you want, then press .
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left * When the speaker(s) is (are) out of the phase, “Out” is displayed on the TV screen. The “+” and “–” terminals of the speaker may be connected the other way around. However, depending on the speakers, “Out” appears on the TV screen even though the speakers are connected properly. This is because of the speakers’ specifications. In this case, you can continue to use the receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right Checking the Auto Calibration results Preparing the Receiver To check error code or warning message obtained in “2: Performing Auto Calibration” (page 44), proceed with the following steps. Press V/v to select “Warning” in step 7 in “2: Performing Auto Calibration” (page 45) then press . If a warning message appears, check the message and use the receiver without change.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left Message list after Auto Calibration measurement Display and explanation Error Code 31 The SPEAKERS is set to off. Set it to others and perform the Auto Calibration again. Error Code 32 None of the speakers were detected. Make sure that the optimizer microphone is connected properly and perform the measurement again.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Configuring the network settings of the receiver 5 6 to select “Next”. Press to select “Connect Automatically (DHCP)”. 7 Press to select “Finish”. To set the network settings manually See “To set the IP address manually” (page 118) or “To set the Proxy server manually” (page 119).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Preparing a computer to use as a server A server is a device which delivers content (music, photos, and videos) to a DLNA device on a home network. You can play back content stored on a computer on a home network with this receiver via that network after you have installed application software* which has a DLNA compliant server function. * If you use a Windows 7-based computer, use Windows Media Player 12 bundled with Windows 7.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Installing the VAIO Media plus application software on a computer 1 Turn on your computer and login as an administrator. 2 Insert the supplied CD-ROM into the CD-ROM drive of your computer. Referring to help files For VAIO Media plus operations, refer to the help files. Click “ Settings” in the Home Menu window, then select “ Help” to display help files.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm 3 Guide to on-screen display operation masterpage: Left Press V/v repeatedly to select a menu you want, then press or b to enter the menu. The menu item list appears on the TV screen. Input”. Example: When you select “ You can display the menu of the receiver on the TV screen and select the function you want to use on the TV screen by pressing V/v/B/b and on the remote.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Overview of the main menus Menu icon Description Selects the input source component connected to the receiver (page 54). Music Selects the music from the server on the home network, “My Library” or the audio component connected to the DIGITAL MEDIA PORT adapter (page 56). Photo Video Using the option menus When you press TOOLS/OPTIONS, the option menus for the selected main menu are displayed.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm 3 Press TOOLS/OPTIONS while the menu item list is displayed. masterpage: Left Basic Operations The option menu appears. Playback ?/1 Input buttons 4 Press V/v repeatedly to select the option menu item you want, then press or b. 5 Press V/v repeatedly to select the parameter you want, then press . SOUND FIELD +/– GUI MODE V/v/B/b, To exit the option menu Press MENU.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm 3 Press V/v repeatedly to select the component you want, then press . The menu screen disappears and the playback screen of the external input appears. For details on the selected input and its connected components, see “Connections” (page 19). Turn on the component and start playback. 5 Press MASTER VOL +/– (RM-AAP055 only) or 2 +/– (RM-AAP056 only) to adjust the volume. You can also use MASTER VOLUME on the receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT The DIGITAL MEDIA PORT is for enjoying sound/images from a portable audio source or computer by connecting a DIGITAL MEDIA PORT adapter. The DIGITAL MEDIA PORT adapters are available for purchase depending on the area. For details on connecting the DIGITAL MEDIA PORT adapter, see “4b: Connecting the audio components” (page 34).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm 4 5 Music Select a track you want to play back using the component connected to the DIGITAL MEDIA PORT adapter. masterpage: Right Playlists > Playlist > Track Artists > Artist > Album > Track Albums > Album > Track Songs > Track Genres > Genre > Artist > Album > Track Composers > Composer > Album > Track Audiobooks > Track Press MASTER VOL +/– (RM-AAP055 only) or 2 +/– (RM-AAP056 only) to adjust the volume.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm x Repeat masterpage: Left Changing the operation screen using the DIGITAL MEDIA PORT Plays back one or all the tracks repeatedly. • Off Deactivates the repeat play mode. • One Plays back one track repeatedly. • All Plays back all the tracks repeatedly. You can change the operation screen using the GUI menu. The DMPORT Control mode is supported by the DIGITAL MEDIA PORT adapters such as TDM-iP50.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm To operate the TDM-iP50 using the adapter menu Make sure that “Adapter GUI” is selected in step 4 in “Changing the operation screen using the DIGITAL MEDIA PORT” (page 58). For details on operating the adapter using the adapter GUI menu, refer to the operating instructions supplied with the adapter you are using. masterpage: Right Using the Sleep Timer You can set the receiver to turn off automatically at a specified time.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Recording using the receiver You can record from a video/audio component using the receiver. Refer to the operating instructions supplied with your recording component. 3 masterpage: Left Prepare the recording component. Insert a blank CD-R into the CD recorder and adjust the recording level. 4 Start recording on the recording component, then start playback on the playback component.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right Notes • Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the source. • Only analog input signals are output from the analog output jack (for recording). • HDMI sound cannot be recorded. • While only composite video signals are being recorded, the auto standby function of the receiver may start up and interrupt the recording.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Tuning into a station automatically (Auto Tuning) 1 Press GUI MODE. After “GUI ON” appears on the display for a while, the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 2 Press V/v repeatedly to select “ FM FM” or “ AM AM”, then press or b. Tuning into a station directly (Direct Tuning) You can enter the frequency of a station directly by using the numeric buttons.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Changing the AM tuning scale (USA model only) You can change the AM tuning scale to either 9 kHz or 10 kHz using the buttons on the receiver. ?/1 masterpage: Right Presetting FM/AM radio stations (Preset Tuning) You can preset up to 30 FM and 30 AM stations. Then you can easily tune in the stations you often listen to. V/v/B/b, 1 Press ?/1 to turn off the receiver. 2 While holding down DISPLAY, press ?/1 on the receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Tuning to preset stations 1 Select “ FM FM” or “ AM AM” from the menu, then press or b. 2 Press V/v repeatedly to select the preset station you want. Preset numbers from 1 to 30 are available. Naming preset stations (Name Input) 1 2 On “ FM FM” or “ AM AM” screen, press V/v repeatedly to select the preset number on which you have stored the station and which you want to name. Press TOOLS/OPTIONS. The option menu appears.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Listening to Satellite Radio (USA model only) To listen to Satellite Radio, you’ll need to connect a SIRIUS Satellite Radio tuner (sold separately) to your Sirius-Ready receiver. SIRIUS Satellite Radio is available to residents of the US (except Alaska and Hawaii) and Canada. masterpage: Right SIRIUS and all related marks and logos are trademarks of Sirius XM Radio Inc. and its subsidiaries.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Connecting a satellite radio tuner masterpage: Left Preparing to listen to a satellite radio Connect the SiriusConnect Home tuner. When you use the SiriusConnect Home tuner with this receiver, be sure to connect the AC power adaptor supplied with the tuner to a wall outlet. GUI MODE V/v/b, SIRIUS jack TOOLS/ OPTIONS MENU Checking the ID number 1 Press GUI MODE.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Checking receiving conditions (Antenna Aiming) 1 2 Select “ SR SR” from the menu, then press or b. masterpage: Right Selecting a channel of the satellite radio SHIFT Press TOOLS/OPTIONS. Numeric buttons The option menu appears. Press V/v repeatedly to select “Antenna Aiming”, then press . 4 While checking the quality of the reception, adjust the direction of the antenna to obtain the best reception.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm 3 Press V/v repeatedly to select the category, then press . Selecting a channel by inputting the channel number directly (Direct Tuning) • ALL: You can select a channel from all the categories. • (category name): You can select a channel from one category. You can enter the channel number directly by using the numeric buttons.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Presetting satellite radio channels You can select the channels you want directly by presetting them using the preset numbers. You can preset up to 30 SIRIUS Satellite Radio channels. masterpage: Right Selecting preset channels 1 Select “ SR SR” from the menu, then press or b. 2 Press V/v repeatedly to select the preset number from the preset list, then press . You can select stored preset channels from 1 to 30.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm Restricting access to specific channels 4 You can restrict access to certain channels using your own lock code. The lock code is set to “0000” as the default. Change the lock code before you use this function for the first time. See “To change the lock code (Lock Code)” (page 70). SHIFT Numeric buttons Press V/v repeatedly to select “ON”, then press . “Enter your 4-digit lock code.” appears.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Right To listen to the locked channels 1 Select a locked channel you want to listen to using Direct Tuning (page 68). “Enter your 4-digit lock code.” appears. 2 Press SHIFT, then press the numeric buttons to enter your 4-digit lock code. The channel is tuned in. To cancel the Parental Lock 1 Select a channel you want to unlock using Direct Tuning (page 68). Tuner Operations 2 Press TOOLS/OPTIONS. The option menu appears.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left Satellite radio message list Message appears on TV screen [Display] Explanation Remedies Antenna Error [ANTENNA ERROR] The antenna is not connected properly. Check the connection between the SiriusConnect Home tuner and the antenna. Acquiring Signal [ACQUIRING] The receiving condition is not good. Try moving the antenna to another location.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right Note Enjoying Surround Sound Selecting the sound field This receiver can create multi channel surround sound. You can select one of the optimized sound fields from the receiver’s preprogrammed sound fields. . SOUND FIELD +/– You cannot select “A. DIRECT” in the following cases. – When you play back content on devices on a home network. – When you select DVD and HDMI 1- 4 as input. Auto Format Direct (A.F.D.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm x C.ST.EX C (Cinema Studio EX C DCS ) Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage. This mode is ideal for watching musicals or films where orchestra music is featured in the soundtrack. masterpage: Left x HALL (Hall) Reproduces the acoustics of a classical concert hall. x JAZZ (Jazz Club) Reproduces the acoustics of a jazz club. x CONCERT (Live Concert) x V.MULTI DIM. (V.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm When headphones are connected You can only select this sound field if the headphones are connected to the receiver. x HP 2CH (Headphone (2ch)) This mode is selected automatically if you use headphones (except “A. DIRECT”). Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channels except LFE signals.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Digital audio formats supported by the receiver Digital audio formats that this receiver can decode depend on digital audio input jacks for the components connected. This receiver supports the following audio formats. Audio format Maximum number of channels Connection of the playback component and the receiver COAXIAL/OPTICAL HDMI Dolby Digital 5.1 a a Dolby Digital EX 6.1 a a a) 7.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Enjoying the surround effect at low volume levels (NIGHT MODE) masterpage: Right Resetting sound fields to the initial settings Be sure to use the buttons on the receiver for this operation. ?/1 This function allows you to retain a theater like environment at low volume levels. This function can be used with other sound fields. When watching a movie late at night, you will be able to hear the dialog clearly even at a low volume level.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Using Network Features About the network functions of the receiver • You can enjoy content (music, photos, and videos) which have been stored on a DLNA-compliant device (DLNA CERTIFIED™ Products) that has an authorized DLNA logo displayed on the device (page 78). • You can use the receiver as a device equivalent to a UPnP media renderer on your home network.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right To search the server GUI MODE You can search the server if the server list does not appear on the TV screen. V/v/B/b, 1 Select “ “ TOOLS/ OPTIONS MENU Music”, “ Photo”, or Video” from the menu, then press or b. 2 Press V/v repeatedly to select “Server”, then press . 3 Press TOOLS/OPTIONS. 1 Press GUI MODE. After “GUI ON” appears on the display for a while, the GUI menu appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Playing back content registered in My Library 1 Select “ Music”, “ Photo”, or “ Video” from the menu, then press or b. 2 Press V/v repeatedly to select “My Library”, then press . 3 Press V/v repeatedly to select content you want to play back from the content list. The playback screen appears on the TV screen and content you selected is played back. Note You cannot register content played back from “My Library” in “My Library”.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm To play back a photo together with background music (BGM) You can enjoy photos with music registered in “My Library” as background music. 1 Play back a photo from “Server” (page 78) or “My Library” (page 80). If you play back a photo from “Server”, you can play back a single photo or a slideshow of photos listed on the screen.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Computer (server, controller) This receiver 1 Select the device to be used as a server using a controller on the home network. 2 Select the content you want to play back using a controller on the home network. 3 Select the receiver to be used to play back the content using a controller on the home network. Refer to the operating instructions of each device.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Listening to Rhapsody 1 2 Press V/v repeatedly to select “ Settings”, then press or b. 3 Press V/v repeatedly to select “Network”, then press . 4 Press V/v repeatedly to select “Rhapsody Account”, then press . Rhapsody Digital Music Service Play all the music you want with Rhapsody® Thousands of artists. Millions of songs.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 11 Press V/v/B/b repeatedly to select “Finish”, then press . 12 Press V/v repeatedly to select “Finish”, then press . Note Repeat the process again from step 6 if the sign in fails. To check the account information 1 Select “ then press Settings” from the menu, or b. Selecting the station from the Rhapsody Stations list You can select the station you want to listen using the Rhapsody Stations list.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 4 Press V/v/B/b to select the track you want to listen to from the list, then press . Registering your favorite track, album, or station The playback screen appears on the TV screen and the track you selected is played back. You can register your favorite track, album, or station in “My Library” while playing back the track or during reception.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Selecting a track, playlist or station registered in My Library You can select a track, playlist or station registered in “My Library”. 1 Select “ Rhapsody” from the menu, then press or b. 2 Press V/v repeatedly to select “My Library”, then press . 3 Press V/v/B/b to select the track you want to listen to using My Library list, then press .
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 5 Press V/v/B/b to select the station you want to listen to, then press . The reception screen appears on the TV screen, and the station you selected is received. Notes • When the number of stations is large, up to 100 stations can be displayed (in order) on this receiver. • The audio supplied in a format that is not supported by this receiver does not appear on the list.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Features of the Setup Manager application software You can check the settings of the receiver, and adjust those settings using your computer, as well as using the receiver, after installing the Setup Manager application software provided on the CD-ROM supplied with the receiver. Installing the Setup Manager application software on a computer 1 Turn on your computer and login as an administrator.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Updating the receiver software using the Setup Manager You can update the receiver software using the Setup Manager application software provided on the CD-ROM supplied with the receiver. Refer to the HELP of the Setup Manager for details on operations of the Setup Manager.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Preparing for the “BRAVIA” Sync The receiver is compatible with the “Control for HDMI-Easy Setting” function. • If your TV is compatible with the “Control for HDMI-Easy Setting” function, you can set the Control for HDMI function of the receiver and playback components automatically by setting the TV (page 90).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right 8 Set the Control for HDMI function of the connected component to on. If the Control for HDMI function for the connected component is already set to on, you do not need to change the setting. For details on setting the TV and connected components, refer to the operating instructions of the respective components.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Notes Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) You can enjoy the TV sound from the speakers connected to the receiver by a simple operation. You can operate System Audio Control function using the TV menu. For details, refer to the operating instructions of the TV.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right Turning off the receiver with the TV Enjoying movies with the optimum sound field (System Power-Off) (Theater/Theatre Mode Sync) When you turn the TV off by using the POWER button on the TV’s remote, the receiver and the connected components turn off automatically. You can also use the receiver’s remote to turn off the TV. AV ?/1 TV Press TV, then press AV ?/1.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm S-AIR Operations Room B S-AIR sub unit (S-AIR receiver) About S-AIR products This receiver is compatible with the S-AIR function, which allows wireless sound transmission between S-AIR products. There are two types of S-AIR product. • S-AIR main unit (this receiver): The S-AIR main unit is for transmitting sound. You can use up to 3 S-AIR main units. (The number of usable S-AIR main unit depends on the use environment.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm About environments where S-AIR products (S-AIR main unit and sub unit) are used S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may cause lost connection or instability in S-AIR reception. • Electronic equipment influence The following may cause interference or cross talk.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 2 Press V/v repeatedly to select “ Settings”, then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select “S-AIR”, then press masterpage: Left Sound transmission is established as follows (example): S-AIR main unit (this receiver) Other S-AIR main unit . ID A ID B 4 Press V/v repeatedly to select “S-AIR ID”, then press or b.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm x Before pairing Sound transmission is established by the ID (example). Your room 2 S-AIR main unit (this receiver) 3 ID A ID A ID A S-AIR sub unit Sound transmission is established between the paired S-AIR main unit and S-AIR sub unit(s) only. 4 5 Press V/v repeatedly to select “S-AIR”, then press . 6 Press V/v repeatedly to select “Pairing”, then press or b. 7 S-AIR sub unit 1 The S-AIR main unit starts pairing. “Pairing.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Notes • Perform pairing within 5 minutes in step 7. If you do not, pairing is recognized as failed, and the screen changes accordingly. In this case, see “If pairing fails” (page 98). • When sound transmission is established, “Pairing complete. To perform pairing to another unit, select “Continue”.” appears. 9 Press B/b repeatedly to select “Finish” or “Continue”, then press . • “Finish”: Finishes pairing.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 2 Press GUI MODE. 8 After “GUI ON” appears on the display for a while, the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 3 4 masterpage: Right Select the input you want on the S-AIR receiver. x When “PARTY” is set The S-AIR receiver’s function changes sequentially as you press INPUT SELECTOR +/– on the receiver or S-AIR CH of the S-AIR receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm To control the system from the S-AIR receiver You can control the system from the S-AIR receiver by using the following buttons. Press Operation N, X, x, Share the same operations on the remote ./> S-AIR CH Change the function of the system For details, refer to the operating instructions of the S-AIR receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 5 6 Press V/v repeatedly to select the setting you want, then press . Stabilizing S-AIR reception • OFF: The system transmits sound by fixing the channel for transmitting. • ON: The system transmits sound by searching for a better channel for transmitting. • AUTO: Normally select this. The system changes “RF Change” to “ON” or “OFF” automatically. Check the following when S-AIR reception is poor or unstable.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm • Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is the most stable. – Place so that the wireless adapters of the S-AIR main unit and sub unit are closer.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 5 Press V/v repeatedly to select the setting you want. • OFF: You cannot enjoy the S-AIR receiver while the S-AIR main unit is in standby mode. • ON: You can enjoy the S-AIR receiver while the S-AIR main unit is in standby mode or turned on. To exit the menu Press MENU.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Notes • Some audio input modes may not be set up depending on the input. • When the HDMI 1-4 input, DMPORT, SERVER, Rhapsody, SHOUTcast, or SIRIUS input is selected, “------” appears on the display, and you cannot select other modes. Select another input, then set the audio input mode. • When “A. DIRECT” is being used, audio input is automatically set to “ANALOG”. You cannot select other modes.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 6 Select the audio and/or video signals you want to assign to the input which you selected in step 3 using V/v/B/b. 7 Press masterpage: Right .
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Notes Using a bi-amplifier connection 1 Press GUI MODE. • Set “Sur Back Assign” to “BI-AMP” before you perform Auto Calibration. • If you set “Sur Back Assign” to “BI-AMP”, the speaker level and distance settings of the surround back speakers and front high speakers become invalid, and those of the front speakers are used. After “GUI ON” appears on the display for a while, the GUI menu appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 2 Adjusting Settings Using the Settings menu masterpage: Right Press V/v repeatedly to select “ Settings”, then press or b to enter the menu mode. The Settings menu list appears on the TV screen. You can adjust various settings for speakers, surround effects, etc. using the Settings menu.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Settings menu list Settings menu Description Auto Calibration Sets the speaker level or distance and makes the measurement automatically (page 108). Speaker Sets the speaker position manually (page 109). Surround Selects the sound field and adjusts the surround effect you choose (page 113). EQ Adjusts the equalizer (bass/ treble sound) (page 114). Audio Sets various sound items (page 114).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right 3 Press V/v repeatedly and to uncheck the items you do not want to measure, then press b. The confirmation screen, asking whether you are ready to start measurement, appears. 4 Press to select “Start”. The measurement results is registered as the position you selected in step 1. Speaker Settings menu You can adjust each speaker manually. You can also adjust the speaker levels after the Auto Calibration is completed.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Manual Setup You can adjust each speaker manually on the “Manual Setup” screen. You can also adjust the speaker levels after the Auto Calibration is completed. masterpage: Left To adjust the distance from the seating position to each speaker You can adjust the distance from the seating position to each speaker (front left/right, front left/right high, center, surround left/right, surround back left/right, subwoofer).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 3 Press V/v repeatedly to set the size of the selected speaker, then press . • Large If you connect large speakers that will effectively reproduce bass frequencies, select “Large”. Normally, select “Large”.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 2 Press V/v repeatedly to adjust the parameter, then press . • OFF • AUTO The test tone is output from each speaker in sequence. • L, C, R, SR, SB*, SBR, SBL, SL, LH, RH, SW You can select which speakers will output the test tone. * “SB” appears when only one surround back speaker is connected. 3 Press V/v repeatedly to adjust the speaker level, then press .
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm D.Range Comp (Dynamic range compression) Lets you compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only. x OFF The dynamic range is not compressed. masterpage: Right Surround Settings menu You can select the sound field and adjust the effect level, etc. on the “Sound Field Setup” screen.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left EQ Settings menu Audio Settings menu You can use the following parameters to adjust the tonal quality (bass/treble level) of front speakers. You can make settings for the audio to suit your preference. Bass Treble Level (dB) Frequency (Hz) A/V Sync (Synchronizes audio with video output) Lets you delay the output of audio to minimize the time gap between audio output and visual display.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right Decode Priority (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks or HDMI IN jacks. x PCM When signals from the DIGITAL IN jack are selected, PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are input, there may be no sound, depending on the format. In this case, set this item to “AUTO”.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Video Settings menu You can make settings for video. Resolution (Converting video signals) Lets you convert the resolution of analog video input signals.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right Notes HDMI Settings menu You can make the required settings for components connected to the HDMI jack. Control for HDMI Lets you turn the Control for HDMI function on or off. For details, see “Preparing for the “BRAVIA” Sync” (page 90). x ON x OFF Note When you set “Control for HDMI” to “ON”, “Audio Out” may be changed automatically.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Subwoofer Level Lets you set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently. x 0 dB masterpage: Left Network Settings menu You can make the settings for the network. Network Setup Lets you make the network settings. x +10 dB x AUTO Automatically sets the level to 0 dB or +10 dB depending on the audio stream.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 4 Press V/v repeatedly to select the IP address, then press . The soft keyboard appears on the TV screen. 5 Press V/v/B/b and to select a character one by one to enter the IP address. 6 Press V/v/B/b to select “Finish”, then press . 7 Press b to display the next screen. 8 Repeat the process in steps 4 to 7 again to enter the Subnet Mask, Gateway address, DNS1 address, and DNS2 address.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm To cancel the setup Press V/v repeatedly to select “Cancel”, then press in step 3. To remove the detected controllers from the list 1 Press V/v repeatedly to select the controller you want to remove from the list, then press to check the box. 2 Press V/v repeatedly to select “Remove All”, then press . Tip Up to 10 network controllers that have attempted to access the receiver are listed, and each of them can control the receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right 2 Select “Update via Internet”, then press System Settings menu You can customize the settings of the receiver. . The current software version and latest software version are displayed on the TV screen. 3 Press B/b repeatedly to select Auto Standby Lets you set the receiver switch to standby mode automatically when you do not operate the receiver or when there is no signals input to the receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm 5 Operating without connecting to a TV You can operate this receiver using the display even if the TV is not connected to the receiver. AMP masterpage: Left Press V/v repeatedly to select the setting you want, then press . To return to the previous display Press B or RETURN/EXIT O. To exit the menu Press MENU. Note Some parameters and settings may appear dimmed on the display.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 122. Menu [Display] Parameters [Display] Initial setting FULL FLAT, ENGINEER, FRONT REF, OFF FULL FLAT Position [POSITION] POS. 1, POS. 2, POS. 3 POS. 1 Naming position [NAME IN] For details, see “To name the seating position” (page 109).
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Menu [Display] Speaker settings [] masterpage: Left Parameters [Display] Settings Initial setting Subwoofer levela) [SW LEVEL] SW –20.0 dB to SW +10.0 dB (0.5 dB per step) SW 0 dB Dynamic range compression [D. RANGE] COMP. MAX, COMP. STD, COMP. AUTO, COMP. OFF COMP. AUTO Speaker pattern [SP PATTERN] 5/2.1 to 2/0 (20 patterns) 3/4.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm Menu [Display] masterpage: Right Parameters [Display] Settings Initial setting Subwoofer distancea) [SW DIST.] SW 3’3” to SW 32’9” (SW 1.00 m to SW 10.00 m) (1 inch (0.01 m) step) SW 9’10” (SW 3.00 m) Distance unit [DIST.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left Menu [Display] Parameters [Display] Settings Initial setting Audio settings [
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right Menu [Display] Parameters [Display] Settings Initial setting System settings [] Naming inputs [NAME IN] For details, see “Naming the input (Name Input)” (page 55). Auto standby mode [AUTO STBY] ON, OFF ON PERMIT, DENY DENY Version display [VER. X.XXX] Updating from PC [UPDATE (PC)] a) Depends on the speaker pattern setting, some parameters or settings may not be available.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left 1) Index name appears only when you have assigned one to the input or preset station. Index name does not appear when only blank spaces have been entered or it is same as the input name. 2)Stream information may not be displayed. 3) This information also appears for non-RDS FM stations. 4)Type of program being broadcast. 5) Text messages sent by the RDS station.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right Checking the ID number 1 Press TUNER repeatedly to select Listening to satellite radio (USA model only) “SIRIUS”. You can also use INPUT SELECTOR +/– on the receiver. For details on SIRIUS Radio service, see “Listening to Satellite Radio” (page 65) in “Tuner Operations”.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB06REM_STR-DN2010-CEL.fm Presetting satellite radio channels (USA model only) 1 Select a channel you want to preset. For details on this operation, see “Selecting channels from a category (CATEGORY TUNING)” (page 129). 2 Press SHIFT, then press MEMORY. “MEM” lights up on the display. 3 Press PRESET + or PRESET – to select a preset number. You can also select the number by pressing SHIFT, then numeric buttons. Preset numbers from 1 to 30 are available.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB06REM_STR-DN2010-CEL.fm 3 Press numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control (including TV button). See the tables on page 132–134 for information on the numeric code(s). Note For a TV remote code value, only numbers in the 500’s are valid. 4 Press ENTER.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB06REM_STR-DN2010-CEL.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB06REM_STR-DN2010-CEL.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB06REM_STR-DN2010-CEL.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm Clearing all the contents of the remote’s memory 1 While holding down MASTER VOL – (RM-AAP055 only) or 2 – (RM-AAP056 only), press and hold ?/1, then press AV ?/1. The RM SET UP indicator flashes 3 times. 2 masterpage: Right Additional Information Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm masterpage: Left On placement On S-AIR function • Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. • Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. • Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. General The receiver is turned off automatically. • “Auto Standby” is set to “ON” (page 121). • The Sleep Timer function is working (page 59). Audio • The protective device on the receiver has been activated.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm There is no sound from digital sources (from COAXIAL or OPTICAL input jack). • Check that the INPUT MODE is not set to “ANALOG” (page 103). • Check that the “A. DIRECT” is not being used. • Check that the selected digital audio input jack is not assigned to other inputs in “Input Assign” in the Input Option menu (page 104). The left and right sounds are unbalanced or reversed.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm Recording cannot be carried out. • Check that the components are connected correctly. • Select the source component using the input buttons (page 54). The MULTI CHANNEL DECODING indicator does not light up in blue. • Check that the playback component is connected to a digital jack and the input is selected properly on this receiver. • Check whether the input source of the software being played back corresponds to the multi channel format.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm • Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component. • Be sure to use a High Speed HDMI cable when you view images or listen to sound during a 1080p, Deep Color (Deep Colour) or 3D transmission. • Sound may not be output from the receiver while the GUI appears on the TV screen. Press GUI MODE to select “GUI OFF”.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm The TV’s remote cannot be used to control the connected component when using the Control for HDMI function. • Depending on the connected component and TV, you may need to set up the component and TV. Refer to the operating instructions supplied with each component and TV. • Change the input of the receiver to the HDMI input connected to the component. When the receiver is in standby mode, there is no image or sound output from the TV.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm • Avoid using the equipment that generates electromagnetic energy, such as a microwave oven. • Place the S-AIR main unit and S-AIR sub unit separately from other wireless devices. • Avoid using any other wireless devices. • Change the “RF Change” setting (page 100). • Change the ID settings of the S-AIR main unit and S-AIR sub unit.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm Remote commander The remote does not function. • Point the remote at the remote sensor on the receiver. • Remove any obstacles in the path between the remote and the receiver. • Replace all the batteries in the remote with new ones, if they are weak. • Make sure you select the correct input on the remote.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm • Is the network controller listed on the Controllers settings screen, and is the box for “Permit” checked? If the box is not checked, check the box for “Auto Permission”, and return to the menu. Then, operate the receiver using the network controller once, and then uncheck the box for “Auto Permission”.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 8 ohm loads, both channels driven, from 20 Hz – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section USA model1) Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz, THD 0.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm masterpage: Left Video section Supported playback formats Inputs/Outputs Video: 1 Vp-p, 75 ohms COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms PB/CB: 0.7 Vp-p, 75 ohms PR/CR: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through Content delivered from the device on the home network needs to support the following formats for you to play back content on this receiver.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm masterpage: Right Type of content Format Other conditions Notes Photo JPEG JPEG_SM, JPEG_MED, or JPEG_LRG defined in DLNA guidelines 1.0 Maximum Resolution: 4096 × 4096 Non-progressive JPEG BMP Conforms to JPEG. Some files may not be played back. • Not compatible with DRM protected files. • Depending on the files, there may be files that sometimes cannot be played back, even if they meet the requirements described above.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CELIX.fm masterpage: Left Index Numerics C E 2 channel 73 5.1 channel 19 7.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CELIX.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CELIX.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CELIX.
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB01COV_STR-DN2010-CELIX.
