filename[D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US01COV_STRDN1030-CEL.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US02REG_STR-DN1030-CEL.fm4-420-297-14(1) masterpage: Left For customers in the United States WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US02REG_STR-DN1030-CEL.fm 12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. masterpage: Right The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US02REG_STR-DN1030-CEL.fm4-420-297-14(1) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US02REG_STR-DN1030-CEL.fm AirPlay, the AirPlay logo, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks and registered trademarks are of their respective holders. In this manual, ™ and ® marks are not specified. masterpage: Right “x.v.Color (x.v.Colour)” and “x.v.Color (x.v.Colour)” logo are trademarks of Sony Corporation.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US02REG_STR-DN1030-CEL.fm4-420-297-14(1) masterpage: Left FLAC Decorder Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US01COV_STR-DN1030-CELTOC.fm masterpage: Right Table of Contents About This Manual ....................................... 4 Supplied accessories ..................................... 9 Description and location of parts ................ 10 Getting started ............................................. 19 Connections 1: Installing the speakers............................. 22 2: Connecting the speakers .........................
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US01COV_STR-DN1030-CELTOC.fm masterpage: Left “BRAVIA” Sync Features Additional Information What is “BRAVIA” Sync?...........................84 Preparing for the “BRAVIA” Sync..............84 Playing back equipment with one-touch operation (One-Touch Play) ...................85 Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) .........................
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US01COV_STR-DN1030-CELTOC.fm Supplied accessories • • • • Operating Instructions (this manual) Quick Setup Guide (1) GUI Menu List (1) FM wire antenna (aerial) (1) masterpage: Right Inserting batteries into the remote control Insert two R6 (size-AA) batteries (supplied) in the remote control. Observe the correct polarity when installing batteries.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.fm masterpage: Left Description and location of parts Front panel 12 ql qk 3 4 5 qj 6 qh A ?/1 (on/standby) (page 37, 59, 65) B ON/STANDBY indicator Lights up as follows: Green: The receiver is turned on. Amber: The receiver is in standby mode, and – Either Control for HDMI, Network Standby, or Bluetooth Standby is set to on. – The receiver in zone 2 is turned on.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.fm masterpage: Right Indicators on the display panel 1 2 LH SW RH L C R SL S SR 34 5 6 5 7 89 ZONE 2 USB HDMI COAX OPT PARTY ARC D + EX True HD PL II x z D.L.L. D.C.A.C. EQ S.OPT. MEM DTS - HD MSTR HI RES LBR LFE UPDATE D.RANGE A.P.M.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.fm P DTS(-ES) indicator* Lights up the respective indicator when the receiver is decoding the corresponding DTS format signals. DTS DTS-ES DTS 96/24 DTS DTS-ES DTS 96 kHz/24 bit Q Tuning indicator Lights up when the receiver tunes to a radio station. MEM Memory function, such as Preset Memory (page 60), etc., is activated. ST Stereo broadcast R S.OPT. Lights up when Sound Optimizer function is activated (page 64). S A.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.fm G VIDEO/AUDIO INPUT/OUTPUT section (page 26, 30, 32) Yellow VIDEO IN/OUT* jacks White (L) AUDIO IN/OUT jacks Red (R) H COMPONENT VIDEO INPUT/ OUTPUT section (page 26, 29, 30) Green (Y) Blue (PB) Y, PB, PR IN/OUT* jacks masterpage: Left Remote control Use the supplied remote control to operate this receiver and other equipment. The remote control is pre-programmed to operate Sony audio/video equipment.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.fm A ?/1 (on/standby) Turns the receiver on or sets it to the standby mode. If you press ZONE (C) to switch the remote to zone 2 mode, you can turn the power for zone 2 on or off using ?/1. Saving the power in standby mode When Control for HDMI (page 98), Network Standby (page 101), and Bluetooth Standby (page 101) are set to off, and the receiver in zone 2 is turned off.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.fm FOLDER +/–1) Selects a folder. TUNING +/–1) Scans a station. masterpage: Left M TOP MENU1) Opens or closes the BD-ROM’s or DVD’s Top Menu. POP UP/MENU1) Opens or closes the BD-ROM’s Pop-up Menu, or the DVD’s menu. 2) PARTY Press SHIFT (V), then press PARTY to operate the PARTY STREAMING function. Hold down the button to start or close a PARTY (page 74).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.fm masterpage: Right U SOUND OPTIMIZER Activates the Sound Optimizer function (page 64). V SHIFT Changes the remote control button function to activate the buttons printed in pink. W TV Changes the remote control button function to activate the buttons printed in yellow. X AMP Activates the receiver operation for main zone (page 103). Y RM SET UP Programs the remote control (page 107).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US03DES_STR-DN1030-CEL.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Right Getting started You can enjoy your audio/video equipment connected to the receiver by following the simple steps below. Before connecting cords, be sure to disconnect the AC power cord (mains lead). Installing and connecting the speakers (page 22, 24) Setting the speakers Select the speaker pattern (page 38), then perform Auto Calibration (page 39).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left Function for conversion of video signals The receiver is equipped with a function for converting video signals. Video signals and component video signals can be output as HDMI video signals (HDMI TV OUT jack only). As the default setting, video signals input from the connected equipment are output as shown in the table with solid arrows.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Right Digital audio formats supported by the receiver Digital audio formats that this receiver can decode depend on digital audio output jacks of the equipment connected. This receiver supports the following audio formats. Audio format Maximum number of channels Connection between the playback equipment and the receiver COAXIAL/OPTICAL HDMI Dolby Digital 5.1 a a Dolby Digital EX 6.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left Connections 1: Installing the speakers This receiver allows you to use up to a 7.2 channel system (7 speakers and 2 subwoofers). Example of speaker system configuration 5.1 channel speaker system To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer. 7.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Right 7.1 channel speaker system using front high speakers Connections You can enjoy vertical sound effects by connecting additional two front high speakers. Place the front high speakers – at an angle between 25° to 35°. – at an angle of 20° ± 5° in height. 20˚ ± 5˚ Tip Since the subwoofer does not emit highly directional signals, you can place it wherever you want.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left 2: Connecting the speakers Before connecting cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Bi-amplifier connection If you are not using surround back speakers and front high speakers, you can connect the front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals using a bi-amplifier connection.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left 3: Connecting the TV You can watch the selected input image when you connect the HDMI TV OUT or MONITOR OUT jack to a TV. You can operate this receiver using a GUI (Graphical User Interface) if you connect HDMI TV OUT jack to a TV. Before connecting cords, be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm * If your TV is compatible with the Audio Return Channel (ARC) function, connect E. Be sure to set the “Ctrl for HDMI” to “ON” in HDMI Settings menu (page 85). If you want to select an audio signal using other than an HDMI cable (e.g., via an optical digital cord or an audio cord), switch the audio input mode using INPUT MODE (page 88). **If your TV is not compatible with the ARC function, connect B.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left Notes on HDMI connections Converting video signals • The audio and video signals of HDMI input are not output from the HDMI TV OUT jack while the GUI menu is displayed. • DSD signals of Super Audio CD are not input and output. • Depending on the TV or the video equipment, 3D images may not be displayed. Check the 3D image formats supported by the receiver (page 127).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Right Connecting a Blu-ray Disc player, DVD player Connections Blu-ray Disc player, DVD player Audio/video signals Audio signals Video signals or A B C* D A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left Connecting a satellite tuner, cable TV tuner Satellite tuner, Cable TV tuner Audio/video signals Video signals Audio signals or A B C A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Connecting a PlayStation 3 masterpage: Right PlayStation 3 Audio/video signals A iPod/iPhone (not supplied) A A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable. A Apple Composite AV cable (not supplied) Note You can rename the GAME input so that it can be displayed on the receiver’s display panel. For details, see “Naming the input (Name Input)” (page 51).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Connecting a DVD recorder, VCR masterpage: Left Connecting a Camcorder, Video game, PC DVD recorder, VCR Audio signals Video signals Camcorder, Video game, PC Audio/video signals Audio/video signals * A * B C A (On the front panel) A Audio cord (not supplied) B Video cord (not supplied) C HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Right Note 4b: Connecting the audio equipment Connecting a Super Audio CD player, CD player Before connecting cords, be sure to disconnect the AC power cord (mains lead). Super Audio CD player, CD player A A Audio cord (not supplied) 33US STR-DN1030 4-420-297-14(1) Connections You can rename the VIDEO 2 input so that it can be displayed on the receiver’s display panel.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Connecting an iPod, iPhone, USB device masterpage: Left 5: Connecting the antennas (aerials) Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm If you have an Internet connection, you can connect this receiver to the Internet as well. You can connect through a wireless or a wired LAN connection. System requirements The following system environment is required to use the network function of the receiver.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left Configuration example The following illustration is a configuration example of a home network with the receiver and a server. We recommend that you connect the server to the router with a wired connection. Server Internet Modem Router LAN cable (not supplied) LAN cable (not supplied) A B A For a wired LAN connection only. B For a wireless LAN connection only.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Preparing the Receiver If your receiver has a voltage selector on the rear panel, check that the voltage selector is set to the local power supply voltage. If not, use a screwdriver to set the selector to the correct position before connecting the AC power cord (mains lead) to a wall outlet. Depending on the area, the VOLTAGE SELECTOR may differ.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Setting the speakers masterpage: Left 4 Press V/v repeatedly to select “SP Pattern”, then press or b. 5 Press V/v repeatedly to select the speaker pattern you want, then press . 6 Press RETURN/EXIT O. Selecting the speaker pattern Select the speaker pattern according to the speaker system which you are using. 1 Press MENU. The menu is displayed on the TV screen.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 4 5 Press V/v repeatedly to select “SB Assign”, then press or b. • Speaker B: If you connect an additional front speaker system to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals, select “Speaker B”. • BI-AMP: If you connect front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/ FRONT B terminals using a biamplifier connection, select “BI-AMP”.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm The DCAC is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference. For details, see “Test Tone” (page 95). masterpage: Left Setting up the Auto Calibration Optimizer microphone Before you perform Auto Calibration Before you perform Auto Calibration, check the following items. • Set up and connect the speakers (page 22, 24).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Confirm active subwoofer setup Performing Auto Calibration ?/1 SHIFT Input buttons AUTO CAL Note Depending on the characteristics of the subwoofer you are using, the setup distance value may be different from the actual position. V/v/B/b, MENU MUTING/ 1 MASTER VOL +/–/ 2 +/– Press MENU. The menu is displayed on the TV screen. 2 Press V/v repeatedly to select “ Settings”, then press or b.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 3 4 Press V/v repeatedly to select “Auto Cal.”, then press or b. Press B/b repeatedly to select “Start”, then press . masterpage: Left 7 Press V/v repeatedly to select the item you want, then press . • Retry: Performs the Auto Calibration again. • Save: Save the measurement results and exits the setting process. • Warning: Displays warning related to the measurement results.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 10 Disconnect the optimizer microphone from the receiver. Note Tips • You can change the unit of distance in “Distance Unit” in the Speaker settings menu (page 96). • The size of a speaker (“Large”/“Small”) is determined by the low frequency characteristics. The measurement results may vary, depending on the position of the optimizer microphone and speakers, and the shape of the room.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Message list after Auto Calibration measurement Display and explanation Error Code 31 The SPEAKERS is set to off. Set to other speaker settings and perform the Auto Calibration again. Error Code 32 Error Code 33 Speakers were not detected or not connected properly. • None of the front speakers are connected or only one front speaker is connected. • Either the surround left or surround right speaker is not connected.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Searching for an access point and setting up a wireless network (Access Point Scan method) The network name (SSID*1) that identifies your network*2. (This will be needed in step 7.) : If your wireless home network is secured by encryption, the security key (WEP key, WPA/WPA2 key) for your network*2. (This will be needed in step 8.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left When using a fixed IP address Tip Select “Manual”, then press . The IP address input display appears on the TV screen. Press SHIFT, then press numeric button to enter the value for “IP Address”, and then press . Then, enter the value for “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS”. The proxy setting display appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Setting up a wireless network using the WPS push button configuration method WPS button on the wireless LAN router/access point “Complete!” appears after the network settings are complete and “ ” lights up on the display panel. To return to the Network Settings menu, press . (Depending on the network environment, the network settings may take some time.) 3 Perform the server settings.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 2 Press V/v repeatedly to select “Auto”, then press . masterpage: Left Tip When checking the network settings, see “To check the network information” (page 99). The proxy setting display appears on the TV screen. When using a fixed IP address Select “Manual”, then press . The IP address input display appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 2 Press MENU. The menu is displayed on the TV screen. Depending on the TV, the GUI menu may take some time to appear on the TV screen. masterpage: Right To turn “GUI MODE” on and off Press GUI MODE. “GUI ON” or “GUI OFF” appears on the display panel, depending on the mode selected. Overview of the main menus 3 Press V/v repeatedly to select a menu you want, then press or b to enter the menu.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 2 Press V/v repeatedly to select a menu you want, then press or b to enter the menu. The menu item list appears on the TV screen. Input”. Example: When you select “ masterpage: Left Basic Operations Playing an input source equipment ?/1 Input buttons 3 Press TOOLS/OPTIONS while the menu item list is displayed. The option menu appears.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 3 Select the equipment you want, then press . 4 5 Turn on the equipment and start playback. Press MASTER VOL +/– or 2 +/– to adjust the volume. You can also use MASTER VOLUME on the receiver. 6 Press SOUND FIELD +/– to enjoy the surround sound. You can also use 2CH/A.DIRECT, A.F.D., MOVIE (HD-D.C.S.) or MUSIC on the receiver. For details, see page 61.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left Playing an iPod/iPhone You can enjoy music/video contents from the iPod/iPhone by connecting it to the iPod/iPhone ( (USB) port and VIDEO IN jack) on the receiver. For details on connecting the iPod/iPhone, see page 31, 34. Compatible iPod/iPhone models You can use the following iPod/iPhone models on this receiver. Update your iPod/iPhone with the latest software before using it.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Selecting the iPod/iPhone control mode masterpage: Right Operating the iPod/iPhone using “System GUI” mode 1 Make sure that “System GUI” is selected in step 4 in “Selecting the iPod/iPhone control mode” (page 53). 2 Select “iPod/iPhone”, then press . 3 Select the content you want from the content list, then press .
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 3 Select the content you want using iPod/iPhone menu. For details on operating the iPod/iPhone, refer to the operating instructions supplied with iPod/iPhone. To operate the iPod/iPhone using the remote control masterpage: Left Press USB before you use the following buttons. Press Operation N Starts play. X, x Pauses play. m/M Fast reverses or forwards. ./> Goes to the previous/next track.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Message and explanation masterpage: Right Product name Model name No Music/No Video No music or video was found. NWZ-E343 / E344 / E345 HP No Support No sound is output from the headphones when iPod or iPhone is connected.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left To operate the USB device using the remote control Operating the USB device SHIFT V/v/B/b, TOOLS/ OPTIONS MENU USB N 1 Press MENU. The menu is displayed on the TV screen. 2 Select “ or b. Music”, then press ./>, REPEAT FOLDER +/– m/M N x When the USB device is connected, “USB” appears on the TV screen. 3 4 Select “USB”, then press X . Press N.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm USB message list Message and explanation Reading The receiver is recognizing and reading information of the USB device. Device Error The memory of the USB device could not be recognized (page 55). No Support An unsupported USB device is connected, an unknown device is connected, or the USB device is connected through a USB hub (page 55).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm masterpage: Left Notes • Some sources contain copyright protection to prevent recording. In this case, you may not be able to record from the source. • Audio and video input signals via HDMI IN, COMPONENT VIDEO IN and DIGITAL IN jacks cannot be recorded. • While only composite video signals are being recorded, the auto standby function of the receiver may start up and interrupt the recording.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm 2 masterpage: Right Tip Select “ FM FM” or “ AM AM” from the menu, then press or b. The FM or AM menu list appears on the TV screen. Tuning to a station automatically (Auto Tuning) 1 Select “Auto Tuning”, then press or b. 2 Press V/v. In case of poor FM stereo reception 1 Tune in the station you want to listen to 3 Press . If you cannot tune to a station “– – – .
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US04GET_STR-DN1030-CEL.fm Presetting FM/AM radio stations (Preset Tuning) masterpage: Left Tuning to preset stations 1 Select “ FM FM” or “ AM AM” from the menu, then press or b. 2 Select the preset station you want, then press . You can store up to 30 FM and 30 AM stations as your favorite stations. V/v/B/b, TOOLS/ OPTIONS 1 2 Tune to the station that you want to preset using Auto Tuning (page 59) or Direct Tuning (page 59).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right Note You cannot select “A. DIRECT” when you select BD/DVD, GAME, USB, AirPlay, HOME NETWORK and SEN as input. Enjoying Sound Effects Selecting the sound field This receiver can create multi channel surround sound. You can select one of the optimized sound fields from the receiver’s pre-programmed sound fields. SOUND FIELD +/– Auto Format Direct (A.F.D.) mode The Auto Format Direct (A.F.D.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm x HD-D.C.S. HD Digital Cinema Sound (HD-D.C.S.) is Sony’s new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on precise response measurement data of a mastering studio.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right Notes on sound fields Performs Dolby Pro Logic IIz mode decoding. This setting can expand a source sound from a 5.1 channel to a 7.1 channel to which a vertical equipment is applied, and gives a dimension of presence and depth. • Depending on the speaker pattern settings, some sound fields may not be available. • You cannot select PLIIx MV/MS and PLIIz at the same time.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left Using the Sound Optimizer function Using the Advanced Auto Volume function The Sound Optimizer lets you enjoy clear and dynamic sound at low volume levels. It automatically calibrates the sound which cannot be heard well when you turn down the volume level. After Auto Calibration is performed, the sound level is optimized to suit your environment.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Resetting sound fields to the default settings Be sure to use the buttons on the receiver to perform this operation. ?/1 MUSIC Press ?/1 to turn off the receiver. 2 While holding down MUSIC, press ?/1. “S.F. CLEAR” appears on the display panel and all sound fields are reset to their default setting.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Setting up the server To listen to audio content stored on your server with this receiver, you need to set up the server in advance. The following server devices are compatible with this receiver. • Sony VAIO Media plus 1.3, 1.4, 2.0, and 2.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm 5 Follow the instructions that appear on the display according to the environment in which the receiver is used. When the settings are completed, confirm that the item under [View your active networks] is changed to [Home network] or [Work network] in the [Network and Sharing Center] window. 6 masterpage: Right 9 Select [Allow all]. The [Allow All Media Devices] window opens.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left 1 Go to [Start] – [All Programs]. 6 Check [Private] and select [Next]. 2 Select [Windows Media Player]. 7 Confirm that [Location type] is changed to [Private], and select [Close]. 8 Confirm that [(Private network)] is displayed on the [Network and Sharing Center] window, and close the window.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm 12 Refresh the server list. After you finish setting up Windows Media Player 11, refresh the server list of the receiver and select this server from the server list. For details on selecting a server, see “To refresh the server list” (page 69). To refresh the server list When you add a new server to the home network, or when you cannot find the server you want on the list, refresh the server list.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm 1 Press MENU. masterpage: Left 6 The menu is displayed on the TV screen. Select the track you want, then press . 2 Select “ or b. Playback starts. Make sure that sound is being output from the speakers of the receiver. 3 Select “HOME NETWORK”, then press . Music”, then press The server list appears on the TV screen. If the last selected item (playlist, album, folder, etc.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm To operate Home Network function using the remote control To Do the following Pause playback* Press X during playback. Press N to resume playback. Stop playback Press x. Go to beginning of Press ./> repeatedly. the current track, previous/next track Reselect the item you want to play Press RETURN/EXIT O or B repeatedly until the directory you want appears.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left 5 SHIFT • Press V/v to select the item. • Press to go to the next directory, or to listen to the station. • Press RETURN/EXIT O to go to the previous directory. Numeric buttons ENT/MEM ALPHABET SEARCH/ SEN Select the folder or station you want, then press . Note If “No Service” appears and you cannot obtain a service provider list, press TOOLS/OPTIONS and select “Refresh”.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Presetting stations You can store up to 20 stations as your favorite stations. 1 Select the station you want to preset. 2 During reception, press SHIFT, then press ENT/MEM. masterpage: Right Enjoying a variety of music services You can enjoy listening to the content of a variety of music services offered on the Internet.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Using the PARTY STREAMING function Audio contents currently being played back on this receiver can be also played back on all devices corresponding to the PARTY STREAMING function on your home network at the same time. If you encounter an interruption when using a wireless connection, connect your receiver to the router with a wired connection.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right To close a PARTY Press SHIFT, then hold down PARTY until “CLOSE PARTY” appears. You can also use PARTY on the receiver to close a party. Joining a PARTY The receiver can join a PARTY that has been started by another device so that you can enjoy the same audio content being played in a different room.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm 1 masterpage: Left [iTunes] Tap/click on the icon at bottom right of the iOS device screen or iTunes window. [iOS device] 3 Start playing back audio content on an iOS device or on iTunes. AirPlay is selected as a function of the receiver automatically. Tip If the playback does not start, perform the process again from step 1.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Tips • The most recent control command to the receiver is given priority. The receiver starts playing back audio content of another device when it accepts control from that AirPlay-equipped device, even if this receiver is being used for AirPlay with the original device. • The very loud sound may output from this receiver when you set the volume too loud using iOS devices or iTunes.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm 8 Select “Agree”, then press . masterpage: Left Network features message list The receiver starts to update the software and the GUI MODE is turned off automatically. The ON/STANDBY indicator on the front panel flashes during the update. It may take a while (about 40 minutes at the longest) for the receiver to finish the update.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Message and explanation Not in Use An operation that is currently prohibited is being performed. SEN Message and explanation Cannot Connect The receiver cannot be connected to the server. Cannot Get Data The receiver cannot obtain content from the server. masterpage: Right Software update Message and explanation Cannot connect The receiver cannot access to the server to download the latest version of the software.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Searching for an item using a keyword masterpage: Left 2 Press SHIFT, then press the numeric/text buttons to enter a keyword. A keyword can be up to 15 characters. When a list is displayed on the TV screen (such as artist list, a track list, etc.), you can enter a keyword to search for an item you want. Searching by keywords is available only when the Home Network or SEN function is selected.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right Notes Using Bluetooth Features About the Bluetooth wireless technology Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices. Bluetooth wireless technology operates within a range of about 10 meters (33 feet).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left Note Pairing the receiver with a Bluetooth device Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the receiver with your Bluetooth device. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to “Playing music of a Bluetooth device” (page 83).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Playing music of a Bluetooth device You can operate a Bluetooth device by connecting the receiver and a Bluetooth device using AVRCP. Check the following before playing music: – The Bluetooth function of the Bluetooth device is turned on. – Pairing has been completed. 1 Press BLUETOOTH to select Bluetooth function. The receiver automatically connects to the last connected Bluetooth device.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm “BRAVIA” Sync Features What is “BRAVIA” Sync? The “BRAVIA” Sync function allows communication between Sony products such as TV, Blu-ray Disc/DVD player, AV amplifier, etc. that supports the Control for HDMI function.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm If your TV is not compatible with the “Control for HDMI-Easy Setting” function GUI MODE V/v/b, MENU 1 Press MENU. The menu is displayed on the TV screen. 2 Select “ Settings” from the menu, then press or b. The Settings menu list appears on the TV screen. 3 Select “HDMI”, then press or b. 4 Select “Ctrl for HDMI”, then press or b. 5 Select “ON”, then press . The Control for HDMI function is set to on.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm • Depending on the settings, the receiver may not turns on when “Pass Through” is set to “AUTO” or “ON”. Tip You can also select a connected equipment, such as Blu-ray Disc/DVD player from the TV menu. The receiver and TV will automatically switch to the appropriate HDMI input.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right Enjoying optimum sound field for the selected scene Operating the receiver using the TV’s remote control (Scene Select) (Home Theatre Control) The optimum picture quality and sound field are selected automatically according to the scene selected on your TV. For details on the operation, refer to the operating instructions of the TV.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left • ANALOG: Specifies the analog audio signals input to the AUDIO IN (L/R) jacks. Other Operations Switching between digital and analog audio (INPUT MODE) When you connect equipment to both digital and analog audio input jacks on the receiver, you can fix the audio input mode to either of them, or switch from one to the other, depending on the type of material you intend to watch.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm 3 Select the input name you want to assign. 4 Press TOOLS/OPTIONS. The option menu appears. 5 masterpage: Right 6 Select the video and/or audio signals you want to assign to the input which you selected in step 3 using V/v/B/b. 7 Press . Select “Input Assign”, then press or b. The “Input Assign” screen appears. Input name Assignable video input jacks Assignable audio input jacks BD/DVD GAME COMP.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Using a bi-amplifier connection 1 Press MENU. The menu is displayed on the TV screen. 2 Select “ press Settings”, then or b. The Settings menu list appears on the TV screen. 3 Select “Speaker”, then press or b. 4 Select “SP Pattern”, then press or b. 5 Select the appropriate speaker pattern so that there are no surround back speakers and front high speakers, then press .
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right Making a zone 2 connection Outputs sound from speakers in zone 2 using the receiver and another amplifier.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Operating the receiver from zone 2 The following operations are described for connecting an IR repeater and operating the receiver in zone 2. When an IR repeater is not connected, use this receiver in the main zone. AV ?/1 ?/1 ZONE Input buttons SOURCE 1 Turn on the main receiver (this receiver). 2 3 Turn on the receiver in zone 2. Press ZONE.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right 3 Adjusting Settings Select the menu item you want, then press . Example: When you select “Auto Cal.”. Using the Settings menu You can adjust various settings for speakers, surround effects, etc. using the Settings menu. To display the menu of the receiver on the TV screen, make sure that the receiver is in “GUI MODE” by following the steps in “To turn “GUI MODE” on and off” (page 49).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left 2 Select “Lvl”. Speaker Settings menu You can adjust each speaker manually. You can also adjust the speaker levels after the Auto Calibration is completed. Note The speaker settings are only for the current seating position. x SP Pattern (Speaker Pattern) Select “SP Pattern” according to the speaker system which you are using. Select the speaker pattern before you perform Auto Calibration.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm To adjust the size of each speaker You can adjust each speaker’s (front left/right, front left/right high, center, surround left/right, surround back left/right) size. 1 Select the speaker on the screen for which you want to adjust the size, then press . 2 Select “Size”. 3 Set the size of the selected speaker, then press .
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm x D.Range Comp (Dynamic range compression) Lets you compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only. • MAX: The dynamic range is compressed dramatically. • STD: The dynamic range is compressed as intended by the recording engineer.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm EQ Settings menu You can use the following parameters to adjust the tonal quality (bass/treble level) of front speakers. • Bass • Treble Bass Treble Level (dB) Frequency (Hz) Note This function does not work when “A. DIRECT” is being used. Audio Settings menu You can adjust settings for the audio to suit your preference. x D.L.L. (Digital Legato Linear) Note This function works when “2CH ST.”, “A.F.D.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left x Audio Out HDMI Settings menu You can adjust the required settings for equipment connected to the HDMI jack. x Ctrl for HDMI (Control for HDMI) Lets you turn the Control for HDMI function on or off. For details, see “Preparing for the “BRAVIA” Sync” (page 84). • ON • OFF Notes • When you set “Ctrl for HDMI” to “ON”, “Audio Out” may be changed automatically.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm To check the network information 1 Select “Information”, then press . 2 Select the setting item you want to check, then press . The current setting information appears on the TV screen.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm To set access permission for the devices Note You can set access permission for a device on the device list. Only devices set to “Allow” are recognized on the home network. 1 Select “Access Settings”, then press Up to 5 Media Remote devices can be added to the device list. If 5 devices have already been registered, “Device Full” appears, and a new device cannot be added to the list.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm x Network Standby While the “Network Standby” mode is set to “On”, the receiver can always be connected and controlled over the network. 1 Select “Network Standby”, then press . 2 Select “Off” or “On”, then press . • Off: The network function turns off when the receiver is in standby mode. The receiver takes more time to resumes operation when powered on again.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left x Address Info Lets you check the Bluetooth device address information. You can check the address information when a Bluetooth device is connected. System Settings menu You can adjust the settings of the receiver. Operating without connecting to a TV You can operate this receiver using the display panel even if the TV is not connected to the receiver.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Right Using the menu on the display panel Press GUI MODE repeatedly to select “GUI OFF”. The receiver is switched to front panel display mode. 1 2 3 Press AMP. Press MENU. Press V/v repeatedly to select the menu you want, then press or b. 4 Press V/v repeatedly to select the parameter you want to adjust, then press or b. 5 Press V/v repeatedly to select the setting you want, then press .
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm masterpage: Left Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 103. Menu [Display] Parameters [Display] Settings Default setting FULL FLAT, ENGINEER, FRONT REF, OFF ENGINEER Test toneb) [TEST TONE] OFF, FIX xxxc), AUTO xxxc) OFF Front left speaker levelb) [FL LEVEL] FL –10.0 dB to FL +10.0 dB (0.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.fm Menu [Display] masterpage: Right Parameters [Display] Settings Default setting Surround back speaker assignd) [SB ASSIGN] SPK B, BI-AMP, OFF OFF Front left speaker distanceb) [FL DIST.] FL 1.00 m to FL 10.00 m (FL 3’3” to FL 32’9”) (0.1 m (1 inch) interval)e) FL 3.00 m (FL 9’10”) Front right speaker distanceb) [FR DIST.] FR 1.00 m to FR 10.00 m (FR 3’3” to FR 32’9”) (0.1 m (1 inch) interval)e) FR 3.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US05ENJ_STR-DN1030-CEL.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US06REM_STR-DN1030-CEL.fm To view the information on the display panel The display panel provides various information of the receiver status such as sound field. 1 Select the input for which you want to masterpage: Right Using the Remote Control Programming the remote control check the information. 2 Press AMP, then press DISPLAY repeatedly. Each time you press DISPLAY, the display will change cyclically as follows.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US06REM_STR-DN1030-CEL.fm 3 Press the numeric buttons to enter the numeric code. If more than one code exists, try to enter either one which corresponds to the equipment including TV. Use the tables on page 108–111 to find the numeric code(s) corresponding to the equipment. Note Only the codes in the 500’s are valid for the TV button. 4 Press ENT/MEM.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US06REM_STR-DN1030-CEL.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US06REM_STR-DN1030-CEL.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US06REM_STR-DN1030-CEL.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm Resetting the remote control masterpage: Left Additional Information Precautions AV ?/1 RM SET UP ?/1 On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources MASTER VOL –/ 2– 1 While holding down MASTER VOL – or 2 –, press and hold ?/1, then press AV ?/1.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm masterpage: Right On Bluetooth communication • Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver. • Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock. • Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm • This receiver supports security functions that comply with the Bluetooth specification to ensure secure connection during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm • Depending on the playback equipment, you may need to set up the equipment. Refer to the operating instructions supplied with each equipment. • Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for the 1080p, Deep Color (Deep Colour) or 3D transmission. No 3D image appears on the TV. • Depending on the TV or the video equipment, 3D images may not be displayed.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm • Check that the connecting cords are away from a transformer or motor, and at least 3 meters (10 feet) away from a TV set or fluorescent light. • Move your audio equipment away from the TV. • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol. There is no sound, or only a very lowlevel sound is heard from specific speakers.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm • When using the Control for HDMI function, you cannot control the connected equipment using TV’s remote control. – Depending on the connected equipment and TV, you may need to set up the equipment and TV. Refer to the operating instructions supplied with each equipment and TV. – Change the input of the receiver to the HDMI input connected to the equipment.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm masterpage: Left Recording cannot be carried out. • Check that the equipment is connected correctly. • Select the source equipment using the input buttons (page 50). • Audio input signals via HDMI IN and DIGITAL IN jacks cannot be recorded. • Copyright protection to prevent recording is contained in the sources. In this case, you may not be able to record from the sources.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm iPod/iPhone The sound is distorted. • Press MASTER VOL – or 2 – on the remote control repeatedly. • Set the “EQ” setting of the iPod/iPhone to “Off” or “Flat”. There is no sound from the iPod/ iPhone. • Disconnect the iPod/iPhone and connect the iPod/iPhone again. The iPod/iPhone cannot be charged. • Check that the receiver is turned on. • Make sure the iPod/iPhone is connected firmly.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm Erroneous display. • The data stored in the USB device may have been corrupted. • The character codes that can be displayed by this receiver are as follows: – Upper cases (A to Z) – Lower cases (a to z) – Numbers (0 to 9) – Symbols (’ = < > * + , – . / @ [ \ ] _ `) Other characters may not be displayed correctly. “Reading” is displayed for an extended time, or it takes a long time before playback starts.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm • Make sure that the wireless LAN router/ access point is turned on. Cannot control the receiver using the Media Remote device. • The receiver may take a long time to connect to the network after you turn on the receiver. Wait for a few moments, and then try using the Media Remote again.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm You cannot play audio data normally. • Shuffle Play is selected. Press SHIFT, then press SHUFFLE repeatedly until “SHUF” disappears. Play does not start, or does not automatically change to the next track or file. • Make sure that the audio file you are trying to play is in a format supported by this receiver (page 69). • WMA files with DRM copyright protection cannot be played back.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm • A maximum of 20 connectable devices has been set. Delete unnecessary devices on the device list, and then set “Auto Access” to “Allow” (page 99). • Server operation of the receiver is suspended if the receiver is conducting one of the following operations.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm SEN You cannot connect the receiver to a service. • Make sure that the wireless LAN router/ access point is turned on. • Check the network status. See “To check the network information” (page 99), then select “Connection” in step 2. If “Connection Fail” appears, set up the network connection again (page 66).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm • If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. • Turn down the volume of the connected Bluetooth device. “BRAVIA” Sync (Control for HDMI) Remote control The remote control does not function. • Point the remote control at the remote control sensor on the receiver (page 10).
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm masterpage: Left Amplifier section Clearing the memory Reference sections To clear See All memorized settings page 37 Customized sound fields page 65 USA model1) Minimum RMS Output Power (8 ohms, 20 Hz – 20 kHz, THD 0.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm masterpage: Right FM tuner section Frequency response Analog 10 Hz – 100 kHz, +0.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US07ADD_STR-DN1030-CEL.fm iPod/iPhone section DC 5V 1.0 A MAX USB section MP3 (MPEG 1 Audio Layer-3): 32 kbps – 320 kbps, VBR WMA: 48 kbps – 192 kbps AAC: 48 kbps – 320 kbps * Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US01COV_STR-DN1030-CELIX.fm masterpage: Right Index Numerics C F 2 channel 61 5.1 channel 22 7.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US01COV_STR-DN1030-CELIX.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US08LIC_STRDN1030-CEL.fm masterpage: Right END-USER LICENSE AGREEMENT FOR SONY SOFTWARE You should carefully read the following agreement before using the SONY SOFTWARE (defined below). Using the SONY SOFTWARE indicates your acceptance of the agreement. If you do not agree with it, you are not authorized to use the SONY SOFTWARE.
D:\NORM'S JOB\SONY HA\SO120034\STR-DN1030_PMRF 04\4420297141_US\US08LIC_STRDN1030-CEL.fm masterpage: Left EXCLUSION OF WARRANTY ON SONY SOFTWARE You expressly acknowledge and agree that use of the SONY SOFTWARE is at your sole risk.
