Stereo Receiver User Manual

ManualsBrandsSony ManualsStereo SystemSTR-DE835

Table Of Contents

STR-DE835/DE935/SE591/V828

US Model

STR-DE835/DE935/SE591

Canadian Model

STR-DE835/DE935

E Model

Australian Model

PX Model

STR-DE835

Chinese Model

STR-V828

SERVICE MANUAL

FM STEREO FM-AM RECEIVER

SPECIFICATIONS

Manufactured under license from Dolby Laboratories

Licensing Corporation.

“DOLBY” and the double-D symbol a are trademarks

of Dolby Laboratories Licensing Corporation.

Ver 1.1 2002. 02

Sony Corporation

Home Audio Company

Published by Sony Engineering Corporation

9-928-901-12

2002B1600-1

AUDIO POWER SPECIFICATIONS:

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

With 8 Ω loads, both channels driven, from 20 – 20,000 Hz; rated 110

W(STR-DE935) and 100 W(STR-DE835/SE591) per channel minimum

RMS power, with no more than 0.09% toral harmonic distortion from 250

mW to rated output (USA model only).

Amplifier section

POWER OUTPUT

Stereo mode (8Ω 20Hz – 20kHz, THD 0.09%)

USA, Canadian models

STR-DE935 : 110W + 110W

STR-DE835/SE591 : 100W + 100W

Other models

95W + 95W

(8Ω 20Hz-20kHz, THD 0.09%)

135W + 135W

(8Ω at 1kHz, THD 10%)

Surround mode USA, Canadian models

(8Ω at 1kHz, THD 0.8%)

STR-DE935

Front: 110W + 110W

Center

: 110W

Rear

): 110W + 110W

STR-DE835/SE591

Front: 100W + 100W

Center

: 100W

Rear

): 100W + 100W

Other models

Rated power

(8Ω at 1kHz, THD 0.7%)

Front: 100W + 100W

Center

: 100W

Rear

): 100W + 100W

Reference

(8Ω 20Hz-20Hz, THD 0.9%)

Front: 95W + 95W

Center

: 95W

Rear

): 95W + 95W

(8Ω at 1kHz, THD 10%)

Front: 135W + 135W

Center

: 135W

Rear

): 135W + 135W

a) Depending on the sound field settings and the source, there may be no

sound output.

Dynamic power output

STR-DE935 : 165W + 165W, 8Ω

250W + 250W, 4Ω

STR-DE835/SE591 : 155W + 155W, 8Ω

240W + 240W, 4Ω

Frequency response PHONO: RIAA

equalization curve ±0.5 dB

CD, TAPE, MD/DAT, TAPE/MD, DVD/LD,

TV/SAT, VIDEO 1, 2, and VIDEO 3(STR-

DE935 only):

10Hz – 50kHz + 0.5/–2dB (with sound field,

equalizer, and bass boost bypassed)

Photo : STR-DE935

— Continued on next page —

Summary of content (68 pages)

PAGE 1
STR-DE835/DE935/SE591/V828 SERVICE MANUAL US Model STR-DE835/DE935/SE591 Ver 1.1 2002. 02 Canadian Model STR-DE835/DE935 E Model Australian Model PX Model STR-DE835 Chinese Model Photo : STR-DE935 STR-V828 Manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation.
PAGE 2
Inputs (Analog) PHONO: Sensitivity: 2.5mV Impedance: 50kΩ S/Nb): 86dB (A, 2.5mVc)) 5.1CH INPUT, CD,DVD/LD,TAPE,MD/ DAT,TAPE/MD,TV/SAT,VIDEO1,2 and VIDEO3(STR-DE935 only): Sensitivity: 150mV Impedance: 50kΩ S/Nb): 96dB (A, 150mVc)) Harmonic destortion Selectivity 0.5% (50mV/m, 400kHz) At 9kHz: 35dB At 10kHz: 40dB d) You can change the AM tuning scale to 9kHz. After tuning in any AM station, turn off the receiver. Hold down the TUNING + button and press the 1/u button.
PAGE 3
TABLE OF CONTENTS SAFETY CHECK-OUT 1. GENERAL ·········································································· 4 (US model only) 2. TEST MODE ······································································ 6 After correcting the original service problem, perform the following safety checks before releasing the set to the customer: Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below.
PAGE 4
SECTION 1 GENERAL Identifying the Parts Front Panel 1 2 3 4 8 9 0 !¡ !™ !£ !¢ !∞ 5 6 7 1/u switch Function buttons INPUT MODE button 5.1CH INPUT button 2ND AUDIO button (DE935 MODEL) DISPLAY button DIMMER button A.F.
PAGE 5
SECTION 2 SERVICING NOTE Rear Panel 1 2 3 4 5 6 1. When the front panel is removed, the VR board is removed at the same time. Consequently the LEDs cannot be turned on and the sound volume cannot be increased or decreased from the remote control. 7 SECTION 3 TEST MODE 8 FLUORESCENT INDICATOR TUBE TEST MODE @¡ @º !ª !• !¶ !§ !∞ !¢ !£ !™ !¡ 0 9 2.
PAGE 6
STR-DE835/DE935/SE591/V828 SECTION 4 DIAGRAMS 4-1. BLOCK DIAGRAM MAIN SECTION DE935 MODEL SELECTOR IC330 J306 IC309 26 TUNER COM 23 TUNER UNIT A 25 MD COM 17 L R CH 23 TAPE Q301 FM SELECTOR IC1502 AUDIO SELECT IC301 19 2CH L SELECTOR IC303 J305 CE CLK DATA S DATA 3 TV/ SAT INPUT DVD/LD 2 1 27 INPUT L 26 30 LIN+ L 25 29 LIN- INPUT 6 11 12 L 24 OUTPUT L 22 INPUT L 21 INPUT L OUTPUT L W 3 S.
PAGE 7
STR-DE835/DE935/SE591/V828 Ver 1.1 2002. 02 4-2.
PAGE 8
STR-DE835/DE935/SE591/V828 4-3. CIRCUIT BOARD LOCATION THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this necessary note is printed in each block.) V-SWITCH board 4/8 board SP board AC board VIDEO board DC board S-VIDEO board DISPLAY board DIGITAL board SP-SW board For schematic diagrams. Note: For printed wiring boards. Note: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums.
PAGE 9
STR-DE835/DE935/SE591/V828 4-4. SCHEMATIC DIAGRAM DIGITAL SECTION(1/3) • See page 19 for Printed Wirig Board. • See page 12 for Waveforms. • See page 49 for IC Pin Functions. • See page 59 for IC Block Diagrams.
PAGE 10
STR-DE835/DE935/SE591/V828 Ver 1.1 2002. 02 4-5. SCHEMATIC DIAGRAM DIGITAL SECTION(2/3) • See page 19 for printed wirig board. • See page 12 for Waveforms. • See page 51 for IC Pin Functions. • See page 59 for IC Block Diagrams.
PAGE 11
STR-DE835/DE935/SE591/V828 4-6. SCHEMATIC DIAGRAM DIGITAL SECTION(3/3) • See page 19 for printed wirig board. • See page 54 for IC Pin Functions. • See page 59 for IC Block Diagrams.
PAGE 12
STR-DE835/DE935/SE591/V828 4-7. PRINTED WIRING BOARD DIGITAL SECTION(1/2) • See page 11 for circuit board location. 1 3 2 4 5 6 7 8 9 10 11 A B C D E F G H • Semiconductor Location Ref. No. Location Ref. No. D1001 D1101 D1102 D1208 D1209 D1211 D1501 D1504 D1505 E-2 C-3 C-6 A-9 D-12 A-9 F-11 G-11 H-11 IC1005 D-2 IC1007 IC1101 IC1102 IC1201 IC1202 IC1301 IC1401 IC1402 IC1403 IC1404 IC1502 Location E-2 C-2 C-6 C-7 F-6 C-4 F-5 F-3 E-3 D-3 G-10 Ref. No. Location Ref. No.
PAGE 13
STR-DE835/DE935/SE591/V828 Ver 1.1 2002. 02 4-8. PRINTED WIRING BOARD DIGITAL SECTION(2/2) • See page 11 for circuit board location. 1 2 3 4 5 6 7 8 9 (Page 36) 10 11 DISPLAY BOARD (Page 24) 12 13 39 A B (Page 44) C 935 MODEL 935 MODEL (Page 23) D US,CND, AUS MODEL EXCEPT US,CND, AUS MODEL US,CND, AUS MODEL E (Page 35) EXCEPT US,CND, AUS MODEL (Page 36) F 40 G H 43 • Semiconductor Location Ref. No. Location Ref. No.
PAGE 14
STR-DE835/DE935/SE591/V828 4-9. PRINTED WIRING BOARD DISPLAY SECTION • See page 11 for circuit board location. 1 3 2 4 5 6 7 8 9 10 11 12 13 14 21 A (PAGE 22) B (PAGE 28) C 27 D Z (PAGE 40) SW BOARD (PAGE 27) E F 27 28 • Semiconductor Location Ref. No. D102 D103 D104 D105 D106 D107 D109 D112 D113 D114 D115 D116 D180 DD11 DD12 DD14 DD15 DD16 Location Ref. No.
PAGE 15
STR-DE835/DE935/SE591/V828 4-10. SCHEMATIC DIAGRAM DISPLAY SECTION • See page 12 for Waveforms. • See page 56 for IC Pin Functions. • See page 61 for IC Block Diagrams. Z D118 1SS352 C102 0.
PAGE 16
STR-DE835/DE935/SE591/V828 4-11. PRINTED WIRING BOARD SURROUND SECTION • See page 11 for circuit board location. 1 2 3 4 5 6 7 8 9 10 11 12 13 A B C D E Z (Page 23) (Page 28) (Page 23) F (Page 23) • Semiconductor G Location Ref. No.
PAGE 17
STR-DE835/DE935/SE591/V828 4-12.
PAGE 18
STR-DE835/DE935/SE591/V828 4-13. PRINTED WIRING BOARD REAR AMP SECTION • See page 11 for circuit board location. 1 2 3 4 5 6 7 8 9 10 11 12 • Semiconductor Location Ref. No.
PAGE 19
STR-DE835/DE935/SE591/V828 4-14. SCHEMATIC DIAGRAM REAR AMP SECTION • See page 58 for IC Block Diagrams. 510 510 The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. — 33 — — 34 — Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
PAGE 20
STR-DE835/DE935/SE591/V828 4-15. PRINTED WIRING BOARD POWER SECTION • See page 11 for circuit board location. 1 2 3 4 5 6 7 8 9 10 11 12 13 A 4 1 (Page 21) B , PX (Page 21) C D (Page 44) E V-SWITCH F G 16 (Page 22) H • Semiconductor Location Ref. No.
PAGE 21
STR-DE835/DE935/SE591/V828 4-16. SCHEMATIC DIAGRAM TUNER/POWER SECTION IC399 RV REG. The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. — 37 — — 38 — Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
PAGE 22
STR-DE835/DE935/SE591/V828 4-17. PRINTED WIRING BOARD VIDEO SECTION • See page 11 for circuit board location. 1 2 3 4 5 6 7 8 9 10 11 12 • Semiconductor 13 Location Ref. No.
PAGE 23
STR-DE835/DE935/SE591/V828 4-18. SCHEMATIC DIAGRAM VIDEO SECTION • See page 60 for IC Block Diagrams.
PAGE 24
STR-DE835/DE935/SE591/V828 4-19. PRINTED WIRING BOARD MAIN SECTION • See page 11 for circuit board location. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 • Semiconductor Location A B C D US,CND, AUS MODELS E (Page 31) F G EXCEPT US,CND, AUS MODELS (Page 32) EXCEPT DE935 MD/ TAPE (Page 35) DE935 MODEL H I F-VIDEO BOARD (Page 40) (Page 31) (Page 32) (Page 21) (Page 31) — 43 — Y (Page 36) (Page 21) VOLUME BOARD (Page 40) — 44 — Ref. No. Location Ref. No.
PAGE 25
STR-DE835/DE935/SE591/V828 4-20.
PAGE 26
STR-DE835/DE935/SE591/V828 4-21. SCHEMATIC DIAGRAM MAIN SECTION(2/2) • See page 43 for printed wirig board. • See page 60 for IC Block Diagrams. 510 510 510 The components identified by mark ! or dotted line with mark ! are critical for safety. Replace only with part number specified. —47 — — 48 — Les composants identifiés par une marque ! sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié.
PAGE 27
4-22. IC1401 Pin No. IC PIN FUNCTION DESCRIPTION CXD2712R AUDIO DSP(DIGITAL BOARD) Pin Name I/O Description 1 VSS3 — Ground 2–5 SOA – SOD O Serial data output 6, 7 ECJ0, ECJ1 I Conditional jump input terminal (7pin Connected to ground) 8 — NC 9 XHDWR I HCIF data write 10 XHDRD I HCIF data read 11 VSS4 — Ground 12 VDD2 — +3.
PAGE 28
Pin No. Pin Name I/O 91 VSS0 — Ground Description 92 – 94 EA13 – EA15 O External RAM address output 95 EA16 O Not used 96 TSTA I Test data input “L” = normal “H” = test (Connecting to ground) 97 PLDIVF I PLL input frequency select “L” = 256Fs “H” = 128Fs (Connecting to ground) 98 PLDIVB O PLL output frequency select “L” = 768Fs “H” = 1024Fs (Connecting to ground) 99 CLKI I Master clock input 100 CLKO O Master clock output (Not used) 101 VSS1 — Ground 102 VDD0 — +3.
PAGE 29
IC1201 MB90573PFV-G-190-BND SYSTEM CONTROL(DIGITAL BOARD) Pin No. Pin Name I/O 1 SCLK O To CXD9511Q clock Description 2 SI I To CXD9511Q data input 3 SO O To CXD9511Q data output 4 CS O To CXD9511Q chip select 5 IC O To CXD9511Q reset(Pull Down near CXD9511Q) 6 D.SIG I ZERO data detect 7 5.1CH O 5.1CH muting. 8 VCC — Power supply +5 V 9 SIN0 I UART input. Used for rewriting flash memory 10 SOT0 O UART output. Used for rewriting flash memory 11 N.
PAGE 30
Pin No. Pin Name I/O 51 SLVDTA/REQ O Slave data/request (Connected to MCU U.SREQ) Description 52 DISPCLK I Display clock (Connected to MCU U.CLOCK) Not used (Connected to ground) 53 N.C I 54 VCC — Power supply +5 V 55 S.LAT O To tuner latch 56 S.DATA O To tuner data 57 S.CLK O To tuner clock 58 DATA IN I PLL data in 59 AUSTOP I Auto stop input 60 STEREO I Stereo input 61 N.C I Not used (Connected to ground) 62 N.
PAGE 31
Pin No.
PAGE 32
IC1503 Pin No. AK4526A A/D,D/A CONVERTER (DIGITAL BOARD) Pin Name I/O Description SDTO source select pin 1 SDOS I “L”: internal ADC output, “H”: DAUX input ORed with serial control register if P/S = “L” (Connected to ground) 2 MCLK I MCKO clock frequency select pin “L”: MCLK, “H”: MCLK/2.
PAGE 33
Pin No. Pin Name I/O 31 RIN– I Rch analog negative input pin Description 32 RIN+ I Rch analog positive input pin 33 VREFL I Negative voltage reference input pin, AVSS (Connected to ground) 34 VCOM O 35 VREFH I 36 A. 5V — Analog power supply pin 37 A.
PAGE 34
IC102 MB90553APF-G-138-BND DISPLAY CONTROL(DISPLAY BOARD) Pin No. Pin Name I/O 1 DCS O DCS logo display data output to LED. Description 2 EQ O EQ ON/OFF display data output to LED. 3 B.B O BASS BOOST display data output to LED. 4 MUTE O MUTING display data output to LED. 5 D.D O DOLBY DIGITAL display data output to LED. 6 VOLUME O VOLUME display data output to LED. 7 POWER RY O Power reay display. 8 5V CHECK O Power check (+5V) 9 — — Not used.
PAGE 35
Pin No.
PAGE 36
IC1101 LC89055W DIGITAL AUDIO I/F RECEIVER (DIGITAL BOARD) Pin No. Pin Name I/O 1 DISEL I Input data select. (connected to ground.) Description 2 DOUT O EIAJ data and parity flag output terminal (Not used) 3 DIN0 I Amplifier integrate data input terminal 4 DIN1 O Amplifier integrate data input terminal (Connecting to ground) Amplifier integrate data input terminal (Connecting to ground) 5 DIN2 I 6 D. GND — Digital ground 7 D.
PAGE 37
4-23. IC BLOCK DIAGRAMS IC1206 NJM2103M (DIGITAL BOARD) CR 1 VSC 2 8 RESET 7 VSA 6 VSB/SESIN 5 V+ + – VREF + – OUTC 3 GND 4 Q R S + + – – VDD2 13 12 11 10 CLOCK PLL 57kHz RDS/ARI PLL 1187.
PAGE 38
IC414, 415, 416 TC9299P (MAIN BOARD) BIAS CIRCUIT PROTECTOR SHIFT REGISTER (13bit) LEVEL SHIFT CIRCUIT STROBE GENERATOR CIRCUIT 11 CS2 10 STB 9 DATA LEVEL SHIFT CIRCUIT IC201 NJM2296M (VIDEO BOARD) IC251,252 NJM2296M (S VIDEO BOARD) V+ 16 Vout2 SW1 15 14 Vin1 13 GND 12 Vout3 11 S6 SW2 10 Vin2 9 S7 S1 S2 S4 S5 S3 1 2 Vout1 SW5 3 Vin5 4 SW3 5 Vin4 6 SW4 7 Vin3 8 V- IC105 BA6208F (DISPLAY BOARD) B IN 5 NC 6 GND 7 A IN 8 SWITCH MOTOR DRIVE SWITCH MOTOR DRIVE 4 3 2 1 A OUT GND B
PAGE 39
IC103 TD62C950RF (DISPLAY BOARD) D OUT1 1 ST CK D Q Q OUT20 20 Q D CK ST 60 OUT40 41 OUT21 Q 40 39 38 37 D H VCC 21 P GND 22 L GND 23 H VCC P GND L GND NC 36 CHG CL 24 35 NC NC 25 34 CK STB 26 33 NC NC 27 NC 28 32 S OUT S IN 29 VDD 30 31 VDD IC104 MSC1164GS (DISPLAY BOARD) NC 1 NC 2 CL 5 CK 20 BIT SHIFT REGISTER CK 32 NC 31 CHG 30 DIN 29 CLK 20 BIT LATCH LS 4 Q GATE CIRCUIT DOUT 3 D 28 GND 7 8 9 10 11 12 13 14 15 16 OUTPUT CIRCUIT VCC 6 HVO20 HVO19 HVO18 HVO17 H
PAGE 40
SECTION 5 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may have some differences from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The mechanical parts with no reference number in the exploded views are not supplied. • • Hardware (# mark) list and accessories and packing materials are given in the last of this parts list.
PAGE 41
Ref. No. Part No.
PAGE 42
5-2.
PAGE 43
Ref. No. Part No. Description 51 52 53 54 55 1-673-349-11 1-673-354-11 1-673-353-11 1-673-359-11 1-673-355-11 H.
PAGE 44
4/8 AC SECTION 6 ELECTRICAL PARTS LIST DC NOTE: • Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. • -XX, -X mean standardized parts, so they may have some difference from the original one. • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • CAPACITORS: uF: µF • RESISTORS All resistors are in ohms.
PAGE 45
Ref. No. C805 C806 C807 C808 C809 Part No. Description 1-130-781-00 1-130-781-00 1-128-555-91 1-126-967-11 1-126-967-11 FILM FILM ELECT ELECT ELECT Remarks 0.22uF 0.22uF 470uF 47uF 47uF 10% 10% 20% 20% 20% 100V 100V 63V 50V 50V < CONNECTOR > CNP801 CNP802 * CNP803 CNP804 1-785-102-21 1-785-102-11 1-564-104-00 1-779-978-11 PIN, CONNECTOR 4P PIN, CONNECTOR 4P PIN, CONNECTOR (B3P-VH) 3P PIN, CONNECTOR 3P Ref. No. DC DIGITAL Part No.
PAGE 46
Ver 1.1 2002. 02 DIGITAL Ref. No. Part No. Description Remarks C1227 C1228 C1229 1-128-840-11 ELECT 1-163-021-91 CERAMIC CHIP 1-127-720-91 ELECT 47uF 0.01uF 470uF 20% 10% 20% C1230 1-165-319-11 CERAMIC CHIP 0.1uF C1301 1-165-319-11 CERAMIC CHIP 0.1uF C1303 C1304 C1305 C1306 C1307 1-165-319-11 1-165-319-11 1-128-840-11 1-163-133-00 1-165-319-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP CERAMIC CHIP 0.1uF 0.1uF 47uF 470PF 0.
PAGE 47
Ver 1.1 2002. 02 DIGITAL Ref. No. Part No.
PAGE 48
DIGITAL Ref. No. Part No. Description Part No. Description R1102 R1103 R1104 R1105 R1106 1-216-073-00 1-216-049-91 1-216-022-00 1-216-066-00 1-216-071-00 METAL CHIP RES,CHIP METAL CHIP METAL CHIP METAL CHIP 10K 1K 75 5.1K 8.
PAGE 49
DIGITAL Ref. No. Part No. Description Part No. Description R1406 R1407 R1408 R1409 R1410 1-216-073-00 1-216-025-91 1-216-025-91 1-216-025-91 1-216-295-91 METAL CHIP RES,CHIP RES,CHIP RES,CHIP SHORT 10K 100 100 100 0 5% 5% 5% 5% Remarks 1/10W 1/10W 1/10W 1/10W Ref. No.
PAGE 50
DISPLAY Ref. No. Part No.
PAGE 51
DISPLAY Ref. No. Remarks Ref. No. Part No. Description R111 R112 R113 R114 R115 1-216-065-91 1-216-065-91 1-216-073-00 1-216-073-00 1-216-117-00 RES,CHIP RES,CHIP METAL CHIP METAL CHIP METAL CHIP 4.7K 4.7K 10K 10K 680K 5% 5% 5% 5% 5% 1/10W 1/10W 1/10W 1/10W 1/10W RR20 1-216-309-00 METAL CHIP 5.6 5% RR21 1-216-298-00 METAL CHIP 2.2 5% RR22 1-216-298-00 METAL CHIP 2.
PAGE 52
H.P JOINT LED Ref. No. Part No. * 1-673-349-11 H.
PAGE 53
MAIN Ref. No. Part No. Description Part No. Description C526 C539 C549 C551 C552 1-136-153-00 1-164-079-11 1-102-934-00 1-128-858-11 1-102-108-00 FILM CERAMIC CERAMIC ELECT CERAMIC 0.01uF 330PF 1.0PF 22uF 150PF 5% 10% 0.25PF 20% 10% 50V 50V 50V 50V 50V Remarks Ref. No.
PAGE 54
MAIN Ref. No. Part No. Description D553 D554 D555 D556 D598 8-719-109-51 8-719-911-19 8-719-911-19 8-719-911-19 8-719-911-19 DIODE MTZJ-T-72-2.2 DIODE 1SS133T-72 DIODE 1SS133T-72 DIODE 1SS133T-72 DIODE 1SS133T-72 D599 D601 D602 D603 D604 8-719-911-19 8-719-911-19 8-719-109-51 8-719-109-51 8-719-911-19 DIODE 1SS133T-72 DIODE 1SS133T-72 DIODE MTZJ-T-72-2.2 DIODE MTZJ-T-72-2.
PAGE 55
MAIN Ref. No. Q613 Q645 Q681 Q698 Q745 Q992 Part No.
PAGE 56
MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R529 R530 R531 R532 ! R533 1-247-866-11 1-249-421-11 1-249-433-11 1-249-437-11 1-249-393-11 CARBON CARBON CARBON CARBON CARBON 30K 2.
PAGE 57
MAIN Ref. No. Part No. Description Remarks < RELAY > RY301 RY501 RY502 RY601 RY602 1-515-793-11 1-515-920-11 1-515-920-11 1-515-920-11 1-515-793-11 RELAY (DE935) RELAY (24V) RELAY (24V) RELAY (24V) RELAY RY681 1-515-793-11 RELAY ************************************************************ Ref. No. Part No. Description 1-104-664-11 1-107-597-11 1-107-597-11 1-162-286-31 1-136-157-00 ELECT CERAMIC CERAMIC CERAMIC FILM 47uF 22PF 22PF 220PF 0.
PAGE 58
REAR-AMP Ref. No. ROTARY SP SP-SW Part No. Description Remarks Ref. No. Part No. R712 R720 R721 R722 R723 1-249-439-11 1-249-429-11 1-249-422-11 1-249-433-11 1-249-442-11 CARBON CARBON CARBON CARBON CARBON 5% 5% 5% 5% 5% 1/4W 1/4W 1/4W F 1/4W 1/4W * 1-673-348-11 ROTARY BOARD ************* ! R724 ! R725 ! R726 R727 R728 1-249-408-11 1-249-408-11 1-234-182-11 1-240-855-91 1-249-425-11 CARBON 180 5% CARBON 180 5% ENCAPSULATED COMPONENT CARBON 6.2K 5% CARBON 4.
PAGE 59
S-VIDEO Ref. No. Part No. Description Remarks A-4419-433-A S-VIDEO BOARD, COMPLETE (DE835:E,PX,SP,MY,AUS/V828) *********************** A-4419-434-A S-VIDEO BOARD, COMPLETE (DE835:US,CND/SE591) *********************** A-4419-435-A S-VIDEO BOARD, COMPLETE (DE935) *********************** Ref. No. Part No.
PAGE 60
S-VIDEO Ref. No. SW Part No. Description R269 1-216-081-00 METAL CHIP R270 1-216-069-00 METAL CHIP R271 1-216-049-91 RES,CHIP R272 1-216-049-91 RES,CHIP R273 1-216-043-91 RES,CHIP R274 1-216-041-00 METAL CHIP R275 1-216-049-91 RES,CHIP R276 1-216-049-91 RES,CHIP R277 1-216-041-00 METAL CHIP R278 1-216-043-91 RES,CHIP R279 1-216-061-00 METAL CHIP Remarks Ref. No. 22K 5% 1/10W (DE835:US,CND/DE935/SE591) 6.
PAGE 61
SW Ref. No. Part No. Description VIDEO Ref. No.
PAGE 62
VIDEO Ref. No. C211 C212 C213 C215 C216 VOLUME Part No. Description 1-165-319-11 1-165-319-11 1-104-664-11 1-165-319-11 1-104-664-11 CERAMIC CHIP CERAMIC CHIP ELECT CERAMIC CHIP ELECT Remarks 0.1uF 0.1uF 47uF 0.1uF 47uF 20% 20% 50V 50V 16V 50V 16V Ref. No. C464 C465 C471 C472 C473 Part No.
PAGE 63
Ref. No. Part No. Description ! T901 ! T901 ! T901 ! T901 TU301 1-433-770-11 1-433-771-11 1-433-773-11 1-433-774-11 1-693-407-11 TRANSFORMER, POWER (DE835:CND) TRANSFORMER, POWER (DE835:SP,MY/V828) TRANSFORMER, POWER (DE835:AU) TRANSFORMER, POWER (DE835:E,PX) TUNER (DE835:US,CND,E,PX/DE935/SE591) Remarks Ref. No.
PAGE 64
STR-DE835/DE935/SE591/V828 US Model STR-DE835/DE935/SE591 SERVICE MANUAL Canadian Model STR-DE835/DE935 E Model Australian Model PX Model STR-DE835 SUPPLEMENT-1 Chinese Model STR-V828 File this supplement with the Service Manual. Subject : • Addition of resistors and capacitors. • Correction • Correction : indicates corrected portion. Page INCORRECT Ref. No. 84 Part No. Description 4-987-977-01 COVER BATTERY(FOR RM-PP402) (DE835,SE591,V828) CORRECT Part No.
PAGE 65
: indicates added portion. Page 31 Page 33 REAR-AMP board REAR-AMP board (location : G-3) (location : G-6 to I-7) Changed Changed Delete Changed JUMPER Changed Delete 3.3k 3.3k JUMPER Changed 510 Changed JUMPER (location : G-10) Delete Changed Changed 510 JUMPER Delete 2 3.3k 3.
PAGE 66
: indicates added portion. Page 43 Page 47 MAIN board MAIN board (location : B-5, 6) (location : C-7 to J-8) Changed Add Changed Delete R561 3.3k JUMPER R511 4.7 Changed 3.3k Add Delete Delete Changed Delete Changed 510 JUMPER Changed (location : B-7, 8) Delete Add Changed Delete Changed Delete R561 4.7 3.3k 3.3k Add R611 Delete JUMPER Changed JUMPER Delete Delete Changed Changed Changed Delete 510 Changed Delete Delete R611 4.7 3.3k (location : B-9, 10) 3.
PAGE 67
MAIN board Page FORMER TYPE Ref. No. 76 77 78 NEW TYPE Part No. Description Part No.
PAGE 68
STR-DE835/DE935/SE591/V828 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date 1.0 1999.04 New 2000.03 SUPPLEMENT-1 2002.02 DIGITAL board suffix-12 contents addition 1.