filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB01COV_STR-DA5000ES-U.fm] masterpage:Right 4-247-188-13(4) FM Stereo FM/AM Receiver Operating Instructions Owner’s Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB02REG_STR-DA5000ES-U.fm] masterpage:Left WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don’t place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB02REG_STR-DA5000ES-U.fm] If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669. The Number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade name: SONY Model No.: STR-DA5000ES/STR-DA3000ES Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell NJ 07649 U.S.A.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB01COV_STR-DA5000ESUTOC.fm] masterpage:Left Table of Contents Getting Started 1: Check how to hookup your components ....................................... 6 1a: Connecting components with digital audio output jacks ........... 8 1b: Connecting components with multi channel output jacks........ 11 1c: Connecting components with only analog audio jacks .................... 13 2: Connecting the antennas ....
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB01COV_STR-DA5000ESUTOC.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Left Getting Started 1: Check how to hookup your components Steps 1a through 1c beginning on page 8 describe how to hook up your components to this receiver. Before you begin, refer to “Connectable components” below for the pages which describe how to connect each component. After hooking up all your components, proceed to “2: Connecting the antennas” (page 15).
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Right Required cords A Audio cord White (L) Red (R) B Audio/video cord Yellow (video) White (L/audio) Red (R/audio) C Video cord F Coaxial digital cord G Monaural audio cord Black Getting Started The hookup diagrams on the subsequent pages assume the use of the following optional connection cords (A to H) (not supplied).
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Left . 1a: Connecting components with digital audio output jacks Hooking up a DVD player, TV monitor, or satellite tuner For details on the required cords (A–H), see page 7. 1 Connect the audio jacks.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Right 2 Connect the video jacks. Note On this receiver, standard video signals can be converted to component video or S-video signals, and S-video signals can be converted to component video signals. However, you cannot convert the component video signals to standard video or S-video signals.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Left Hooking up a CD/Super Audio CD player or MD/DAT deck For details on the required cords (A–H), see page 7. CD/Super Audio CD player MD/DAT deck L R F* E E A l IN A OUT l OUT l E* l A IN COMPONENT VIDE IDEO Y PR/CR P N DIO IMPEDANCE U * Connect to either the CD/SACD COAXIAL IN or the CD/SACD OPTICAL IN jack.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Right 1 Connect the audio jacks. If your DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect it to this receiver’s MULTI CHANNEL INPUT jacks to enjoy the multi channel sound. Alternatively, the multi channel input jacks can be used to connect an external multi channel decoder. For details on the required cords (A–H), see page 7.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Left 2 Connect the video jacks. The following illustration shows how to connect a DVD player with COMPONENT VIDEO (Y, PB/ CB/B-Y, PR/CR/R-Y) output jacks. Connecting a TV with component video input jacks allows you to enjoy higher quality video. You can upconvert the video signals, and adjust the hue, etc. of the converted signals (page 43).
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Right 1c: Connecting components with only analog audio jacks Getting Started Hooking up audio components For details on the required cords (A–H), see page 7.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Left Hooking up video components If you connect your TV to the MONITOR jacks, you can watch the video from the selected input (page 24). You can also display the SPEAKER SET UP, LEVEL, SURR SET UP, EQUALIZER, CUSTOMIZE and TUNER menu settings and sound fields on your TV by pressing ON SCREEN on the remote. For details on the required cords (A–H), see page 7.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Right 2: Connecting the antennas FM wire antenna (supplied) AM loop antenna (supplied) * Getting Started Connect the supplied AM loop antenna and FM wire antenna. FM COMPONENT VIDEO PR/CR /R-Y Y PR/CR /B-Y PR/CR /R-Y Y R IMPEDANCE USE 4-16 * The shape of the connector varies depending on the area code.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Left 3: Connecting speakers Connect your speakers to the receiver. This receiver allows you to use a 7.1 channel system (except for STR-DA3000ES models of area code CEL, TW) or 6.1 channel (STR-DA3000ES models of area code CEL, TW only).
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] 4: Connecting the AC power cord Connect the supplied AC power cord to the AC IN terminal on the receiver, then connect the AC power cord to a wall outlet. AC power cord masterpage:Left fans, or TVs to this outlet. This may cause a malfunction.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] 2 Move the easy scroll key to select “AMP masterpage:Right 5: Setting up the speakers 3 If the displayed model name is same as the You can use the SPEAKER SET UP menu to set the size and distance of the speakers connected to this system. model you use, select “Exit”.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] Check your speaker pattern using the supplied “Easy Setup Guide”. x SUB WOOFER (Sub woofer) • YES If you connect a sub woofer, select “YES”. • NO If you did not connect a sub woofer, select “NO”. This activates the bass redirection circuitry and outputs the LFE signals from other speakers.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] (The angle B should be the same) Tip The “LARGE” and “SMALL” settings for each speaker determine whether or not the internal sound processor will cut the bass signal from that channel. When the bass is cut from a channel, the bass redirection circuitry sends the corresponding bass frequencies to the sub woofer or other “LARGE” speakers.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] 1.0 meter to 7.0 meters (3 to 23 feet) in 0.1 meter (1 foot) steps. * For models of area code U, CA, “X feet” is displayed. Tip The receiver lets you to input the speaker position in terms of distance. However, it is not possible to set the center speaker further than the front speakers. Also, the center speaker cannot be set more that 1.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB03CON_STR-DA5000ES-U.fm] masterpage:Right RM-LG112: Press TEST TONE again. Getting Started The test tone turns off. To output the test tone only from a specific speaker Set “TEST TONE” in the LEVEL menu to “FIX” (page 40). The test tone is output only from the selected speaker.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] masterpage:Left Notes on using headphones Amplifier Operation Selecting the component 1 Rotate INPUT SELECTOR to select the input. The selected input appears in the display.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] Listening to multi channel sound — MULTI CH IN Press MULTI CH IN 1/2 repeatedly to select the multi channel audio source (“MULTI CH 1 DIRECT” or “MULTI CH 2 DIRECT”). Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (see page 15).
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] Direct tuning Enter a frequency of the station directly by using NUM menu or numeric buttons on the remote. For details on the supplied remote, refer to the operating instructions supplied with the remote. RM-LJ312 1 2 masterpage:Left Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 (You do not have to enter the last “0” when the tuning scale is set to 10 kHz.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] masterpage:Right (Models of area code CEL only) This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals. If you want to store FM or AM stations one by one, see “Presetting radio stations”. 1 2 Press ?/1 to turn off the receiver.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] Each time you press the button, you can select the preset station as follows: Using the Radio Data System (RDS) tA1yA2y...yA0yB1yB2y...yB0T tC0y...yC2yC1T Using the remote RM-LJ312 1 Press INPUT SELECTOR, then move the easy scroll key to select “TUNER” from the input list.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] Notes Description of program types Program type indication Description Social Affairs Programs about people and the things that affect them Religion Programs of religious content Phone In Programs where members of the public express their views by phone or in a public forum Travel & Touring Programs about travel. Not for announcements that are located by TP/TA.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] masterpage:Left Changing the display Changing the information in the display You can check the sound field etc. by changing the information in the display. Press DISPLAY repeatedly. Each time you press DISPLAY, the display will change as follows.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] masterpage:Right About the indications in the display 1 2 34 L C R SL S SR SBL SB SBR wf 6 MOVIE MUSIC CINEMA MATRIX wa w; ql A SW: Lights up when sub woofer selection is set to “YES” (page 20).
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB04BSC_STR-DA5000ES-U.fm] masterpage:Left O Tuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages 25–29 for tuner operations. P 96/24: Lights up when the receiver is decoding DTS 96 kHz/24 bit signals. Q MATRIX: Lights up when DTS-ES Matrix decoding is activated. R DISCRETE: Lights up when DTS-ES Discrete decoding is activated.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB05SND_STR-DA5000ES-U.fm] Enjoying Surround Sound Using only the front speakers Listening to 2 channel stereo sources (2CH STEREO) Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channel. Enjoying higher fidelity sound — AUTO FORMAT DIRECT The Auto Format Direct (A.F.D.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB05SND_STR-DA5000ES-U.fm] Enjoying stereo sound in multi channel (2 channel decoding mode) This mode lets you specify the type of decoding for 2 channel audio sources. This receiver can reproduce 2 channel sound in 5 channels through Dolby Pro Logic II; 6 channels through DTS Neo:6; or 4 channels through Dolby Pro Logic. However, DTS 2CH sources are not decoded by DTS Neo:6; they are output in 2 channels.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB05SND_STR-DA5000ES-U.fm] masterpage:Right x CINEMA STUDIO EX C DCS Reproduces the sound characteristics of the Sony Pictures Entertainment scoring stage. This mode is ideal for watching musicals or films where orchestra music is featured in the soundtrack. x V.MULTI DIMENSION DCS Creates 5 sets of virtual speakers from a single pair of actual surround speakers.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB05SND_STR-DA5000ES-U.fm] masterpage:Left x HEADPHONE THEATER DCS Allows you to experience a theater-like environment while listening through a pair of headphones. To turn off the surround effect Press 2CH, or press A.F.D. to select “A.F.D. AUTO”.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB05SND_STR-DA5000ES-U.fm] \How masterpage:Right to select the surround back decoding mode You can select the surround back mode you want according to the input stream. When you select “AUTO” When the input stream contains the 6.1 channel decode flaga), the appropriate decoder is applied to decode the surround back signal. Output channel Applied surround back decoder Dolby Digital 5.1 5.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] Advanced Adjustments and Settings masterpage:Left Selectable audio inputs for each input VIDEO 3 OPT Assigning the audio input — DIGITAL ASSIGN You can assign the digital audio input for other input. This function is convenient in the following cases. (Example) When you have two DVD players and no digital audio input jack is available for the second DVD player.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] Switching the audio input mode for digital components — INPUT MODE 1 2 Rotate INPUT SELECTOR to select the input. Press INPUT MODE repeatedly to select the audio input mode. The selected audio input mode appears in the display. Audio input modes • AUTO 2CH Gives priority to the analog audio signals input to the AUDIO IN (L/R) jacks when there is no digital audio signals.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] Adjusting the LEVEL menu You can adjust the balance and level of each speaker. These settings are applied to all sound fields. 1 2 3 Start playing a source encoded with multi channel surround effects (DVD, etc.). Rotate MAIN MENU to select “LEVEL”. Rotate MENU to select the parameter. For details, see “LEVEL menu parameters” below.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] “S.F. Initialize” appears in the display and all sound fields are reset to the initial setting. masterpage:Right Adjusting the equalizer You can adjust the tonal quality (bass, treble level) of each speaker using the EQUALIZER menu.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] x CENTER MID XXX Hz (Center speaker midrange frequency) Initial setting: 1 kHz You can adjust from 100 Hz to 10 kHz in 5 steps (100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz). x CENTER TREBLE XXX dB (Center speaker treble level) x SURR/SB BASS XXX dB (Surround/surround back speaker bass level) x SURR/SB TRE.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] x LIP SYNC (Time alignment) (STR-DA5000ES only) Initial setting: 0 ms Lets you delay the output of audio to adjust the gap between video and audio. You can adjust from 0 ms to 200 ms in 10 ms steps. x DC P.LINEARIZER (Phase Linearlizing) x S.FIELD LINK (Sound field link) • ON Lets you apply the last selected sound field to an input whenever it is selected.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] masterpage:Left x NAME IN? (Naming inputs) x SP POSI. (Surround speaker position)* Lets you set the name of inputs selected with INPUT SELECTOR. For details, see “Naming preset stations and inputs” on page 49. Lets you specify the location of your surround speakers for proper implementation of the surround effects in the Cinema Studio EX modes (page 34).
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] x SP CROSSOVER > XXX Hz (Speaker crossover frequency) Initial setting: 100 Hz Lets you set the bass crossover frequency of speakers set to “SMALL” in the SPEAKER SET UP menu. You can adjust from 40 Hz to 160 Hz in 10 Hz steps. Advanced SURR SET UP menu parameters When “MENU EXPAND” is set to “ON”, all of the following parameters are displayed and adjustable.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] • OFF The virtual speakers are not created. x A.F.D. 2CH SW (Creating, low frequency signals) • CREATE Lets you create low frequency signals for output to the subwoofer when “A.F.D. AUTO” is selected. • OFF Low frequency signals are not created. Advanced LEVEL menu parameters When “MENU EXPAND” is set to “ON”, all of the following parameters are displayed and adjustable.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] Custom install mode (Models of area code U, CA only) 1 2 Rotate MAIN MENU to select “CIS”. Rotate MENU to select the parameter. For details, see “CIS menu parameters” below. 3 4 Rotate –/+ to select the setting you want. Repeat steps 2 and 3 to adjust the other items. CIS menu parameters Initial settings are underlined.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB06ADV_STR-DA5000ES-U.fm] Storing the adjusted settings — USER PRESET masterpage:Left To use the USER PRESET 1 2 Press USER PRESET repeatedly to select the USER PRESET you want. Press MEMORY/ENTER. Note You can store the adjusted sound field settings, etc. as USER PRESET up to 3 and can easily apply. Setting the USER PRESET 1 Adjust the sound field, etc.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB070TH_STR-DA5000ES-U.fm] masterpage:Right Tips • You can select the character type as follows by rotating –/+. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, rotate –/+ until a blank space appears in the display. • If you made a mistake, rotate MENU until the character you want to change flashes, then rotate –/+ to select the correct character.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB070TH_STR-DA5000ES-U.fm] Using the Sleep Timer You can set the receiver to turn off automatically at a specified time by using the remote. For details, refer to the operating instructions supplied with the remote. RM-LJ312: Select SLEEP from the RECEIVER menu, then press the key repeatedly while the power is on.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB070TH_STR-DA5000ES-U.fm] Recording Before you begin, make sure you have connected all components properly. Recording on an audio tape or MiniDisc You can record on a MiniDisc or cassette tape using the receiver. See the operating instructions of your cassette deck or MD deck if you need help. Select the component to be recorded. Prepare the component for playing.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB070TH_STR-DA5000ES-U.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB070TH_STR-DA5000ES-U.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB070TH_STR-DA5000ES-U.fm] CONTROL A1II Control System The CONTROL A1II Control System was designed to simplify the operation of audio systems composed of separate Sony components. CONTROL A1II connections provide a path for the transmission of control signals which enable automatic operation and control features usually associated with integrated systems.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB070TH_STR-DA5000ES-U.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm] masterpage:Left not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. Additional Information Precautions If you have any question or problem concerning your receiver, please consult your nearest Sony dealer.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm] Troubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. There is no sound from a specific component. • Check that the component is connected correctly to the audio input jacks for that component.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm] There is no sound from the center speaker. • Make sure the sound field function is on (press A.F.D., MOVIE or MUSIC). • Select the CINEMA STUDIO EX mode (page 34). • Adjust the speaker level (page 40). • Make sure the center speaker is set to either “SMALL” or “LARGE” (page 20). The FM reception is poor.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm] Remote control receiver, leave the receiver for a while and turn on the power again. PROTECTOR/CHECK CODE 21 Turn off the receiver and consult your nearest Sony dealer. PROTECTOR/CHECK CODE 22 There is a problem with the power circuit. Turn off the receiver and check the speaker connection. Then turn on the power again.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm] Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) STR-DA5000ES: With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 170 watts per channel minimum RMS power, with no more than 0.6% total harmonic distortion from 250 milliwatts to rated output.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm] STR-DA3000ES: FRONT2): 200 W + 200 W CENTER2): 200 W SURR2): 200 W + 200 W SURR BACK2): 200 W + 200 W 1) Depending on the sound field settings and the source, there may be no sound output.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm] receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: S-video: 1 Vp-p, 75 ohms Y: 1 Vp-p, 75 ohms C: 0.286 Vp-p, 75 ohms COMPONENT VIDEO:Y: 1 Vp-p, 75 ohms PB/CB/B-Y: 0.7 Vp-p, 75 ohms PR/CR/R-Y: 0.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.fm] masterpage:Right List of button locations and reference pages How to use this page Use this page to find the location of buttons and other parts of the system that are mentioned in the text. Illustration number r DISPLAY ws (28, 30) R Name of button/part R Reference page Main unit ALPHABETICAL ORDER A.F.D.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB08ADD_STR-DA5000ES-U.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB01COV_STR-DA5000ES-UIX.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB01COV_STR-DA5000ES-UIX.
filename[\\Nas-data-server\SONY Current jobs\SONY STRDA5000ES\DTP\4247188133\424718813STRDA5000ESU\GB01COV_STR-DA5000ES-UIX.fm] masterpage:Left Printed on 100% recycled paper using VOC (Volatile Organic Compound)free vegetable oil based ink.
