SONY SR Projector SRX-R110/SRX-R105
Breathtaking “4K” quality, high-resolution visuals wi Cinema and large-venue applications.
th stunning 1800:1 contrast ratio for Digital Sony is proud to introduce the SRX-R110 and SRX-R105 SR Ultra High Resolution Projectors. These state-of-the-art projectors are equipped with three Silicon X-tal Reflective Display (SXRDTM) imaging devices, delivering an amazing resolution of 4096 x 2160 pixels (H x V) – more than four times the resolution of full HDTV (1920 x 1080, 16:9 wide screen format) – and meeting the “4K” quality resolution level stipulated by Digital Cinema Initiative (DCI).
The state-of the-art techno Silicon X-tal Reflective Display (SXRD) imaging device CineAlta --- Innovative Solutions for Digital Cinema TM The SXRD device used by the SRX-R110 and SRX-R105 is a 1.55-inch* Liquid Crystal on Silicon based imager developed using leading-edge manufacturing technology. High-quality, accurate visuals are created using this brilliant imaging device. *Measured diagonally.
logy for high picture quality Vertically Aligned Liquid Crystal system In every type of projector system, displaying absolute black is a major issue in order to achieve a high contrast ratio. In other words, the contrast ratio of a projector depends on how effectively the light from the source can be blocked so it does not leak through the LCD device. All Liquid Crystal Display (LCD) devices control the amount of light to be projected by applying an electric field to the liquid crystal gap.
Highly pure, superb color tonal reproduction Highly bright and pure light source of Xenon lamp The SRX-R110 provides a high brightness of 10,000 ANSI lumens*, and the SRX-R105 provides a brightness of 5,000 ANSI lumens using Xenon lamps. A Xenon lamp provides pure, superb color tonal reproduction as it has been used for film projector - essential for Digital Cinema. The SRX-R110 utilizes two 2kW Xenon lamps, and the SRX-R105 uses two 1kW Xenon lamps.
Operational versatility Dual-lamp system with selectable lamp modes The SRX-R110 and SRX-R105 adopt a dual-lamp system that uses two lamps for reliable, flexible and efficient use of light sources. With the dual-lamp system, users can select either single- or dual-lamp modes according to their desired brightness and applications. The dual-lamp mode provides maximum lamp power, and at the same time enables virtually fail-safe operation; if one bulb burns out the other can keep projecting images.
Four option slots LKRI-001 LKRI-002 LKRI-003 Analog Input Board HD-SDI (4:2:2) Input Board Dual-link HD-SDI Input Board Input signal flexibility Simple remote controller unit Four option slots are available to increase the flexibility of the SRX-R110 and the SRX-R105 by using three types of option boards that connect to different types of signal formats. Four input boards can be accommodated simultaneously in the side panel of the projector.
Ethernet Easy setup on a PC using supplied software The SRX-R110 and SRX-R105 come equipped with setup software that allows easy setup and adjustments via its intuitive GUIs on a PC*. These projectors can be controlled through Ethernet or RS-232C interface, and multiple numbers of projectors can be controlled from a single PC**.
Dimensions 1330 (52 3/8) 754.5 (29 3/4) 284 (11 1/4) 462 (18 1/4) 360 (14 1/4) 740 (29 1/4) 500 (21 3/4) 1116 (44) 439 (17 3/8) 167 (6 5/8) Unit=mm (inches) Optional Accessories LKRL-Z115 Zoom Lens 1.5 to 1.9*x zoom lens LKRL-Z120 Zoom Lens 1.9 to 2.3x zoom lens LKRL-Z125 Zoom Lens 2.3 to 4.0x zoom lens LKRL-Z140 Zoom Lens 4.0 to 7.0x zoom lens *The number denotes the ratio of the projection distance to the screen width.
Specifications Input Boards LKRI-001 Analog input board SXRD Device Main Specifications Display device SXRD (Silicon X-tal Reflective Display) Size 1.55" across Diagonal Resolution 4096(H) X 2160(V) Pixels Reflectivity 72% Contrast (as device) More than 4000 : 1 Pixel pitch 8.5µm Width (between pixels) 0.35µm Response speed 5msec (tr + tf) Liquid crystal mode Vertical Aligned Mode Alignment layer Inorganic Thin Film Backplane process 0.
© 2005 Sony Corporation. All rights reserved. Reproduction in whole or in part without permission is prohibited. Features and specifications are subject to change without notice. All non-metric weights and measures are approximate. Sony is a registered trademark of Sony Corporation. CineAlta, SXRD, and SXRD logo are trademarks of Sony Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation.
SR projector SRX-R110/SRX-R105 Installation Data (Installation chart) LKRL-Z115 Zoom Lens LKRL-Z125 Zoom Lens In case of [4096]-horizontal pixels (A) Full Screen Projection – 4096(H) pixels x 2160(V) pixels Screen width [W] Required screen height [H] H = W x 0.527344 Diagonal Screen Size [SS] SS = W x 1.130527 Throwing distance [min.] = W x 1.493566 – 64.0 Throwing distance [max.] = W x 1.749196 – 60.
SR projector SRX-R110/SRX-R105 Installation Data (Installation chart) LKRL-Z115 Zoom Lens LKRL-Z125 Zoom Lens In case of [4096]-horizontal pixels (A) Full Screen Projection – 4096(H) pixels x 2160(V) pixels Screen width [W] Required screen height [H] H = W x 0.527344 Diagonal Screen Size [SS] SS = W x 1.130527 Throwing distance [min.] = W x 1.493566 – 64.0 Throwing distance [max.] = W x 1.749196 – 60.
