SONY Active Speaker System 3-758-667-21 (1) S RS-PC40 Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for Future reference. Owner's Record The model numbers are located on the bottom exterior and the serial number is located in the battery compartment of the left speaker. Record the serial number in the space provided below, Refer to therm whenever you call upon your Sony dealer regarding this product. Model No S RS-PC40 Serial No.
TENT TS «Operate the system only on V DC. Far AC operation, use only the suppl power adapter. Do ot use any other AC power adapter. « After operating the system with the AC power adapter, disconnect the AC power adapter from the wall outlet if the system is not to be used for an extended period of time. The POWER switch on the left speaker does not fur the AC power adapter off.
Left speaker {Front} Right speaker (Front POWER indicator 1 1 132 Press the POWER switch {= ON). Listening to the sound without the The POWER indicator lights up. 2 Adjust the VOLUME control. 3 Press the BASS BOOST switch (= ON) to reinforce the bass. Press the switch again (1 OFF) to cancel the bass boost function, After listening, press the POWER switch (11 OFF), The POWER indicator goes off. built-in amplifier Set the POWER switch (1 OFF).
