S ONY ’ 3-810-082-21 (1) Active Speaker System Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference S RS-PC300D Sony Corporation © 1985 Printed in Japan
WARNING To prevent fire or shock hazard, do not expose the unit ta rain or moisture. GAIT ON. KO REDUCE T RISK OF ELECTABLE SHOVE, 0T HEAVEN COVER 1o €40 O VISOR PEACEABLE SARGE WS, ‘REFER SERVICING Y0 QUALIFIED SCREE PERSONNEL This symbol is intended to alert the user to the presence of insulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Precautions On operating voltage Operate the unit only on 120V AC, 60Hz. On safety . #The nameplate indicating operating voltage, power consumption, etc. is located on the rear exterior of the woofer. « Unplug the unit from the wall outlet when it is not o be used for an extended period of time. To disconnect the cord, pull it out by grasping the plug. Never pull it out by the cord.
Specifications Woofer section Amplifier section Outputted Wooer section: 15 W Mid and high range section: Total: harmonic distortion) Input inputs 3 jacks Phonon fracks (NUT 1 Phonon jacks, stereo mini jack INPUT 23 Input impedance 4.
How to Use Cooler (Front) = Left satiate / Right satellite speaker (Fran) . i speaker (Front) Press the POWER switch (e ON). Listening to the sound through headphones The POWER indicator lights up. Connect the headphones to the £} (headphones) 2 Set the INPUT SELECT switch. jack. The sound from the speakers is automatically To listen to the sound of only one source, set muted off. the INPUT SELECT switch to 1 {for INPUT 1 or Z {for INPUT 2).
Connections 1 To power source i A Ga Age Woofer {Rear} | 3 To personal computer Woofer (Rear) to INPUT 1 of INPUT 2 {phonon Jacks) o INPUT 2 {stereo mini jack) To AV equipment CD player, TV, VCR, video game, etc.
Attaching Satellite Speakers 1 Attach the speaker supports on the display monitor. Clean dust and dirt from display monitor. Remove the adhesives from each speaker support, and attach one speaker support to each side of the display monitor by firmly pressing down. 2 slide the satellite speakers into the speaker supports. et Note «If the sides of your display monitor are curved and you cannot attach the satellite speakers, place them on each side of the computer. The quality of the sound will be unaffected.
‘1 Connect the AC power cord to the wall outlet. 2 Conn act the left and right satellite speakers o the woofer, e 3 Connect the woofer to the source equipment. When the system is connected to a monaural jack of radio, efc, the sound may not come through the right satellite speaker. When you use the optional Sony plug adapter PC-236HG, sound will come through both satellite speakers Connecting to a stereo phone type headphones jack Use the optional PC-234HG plug adapter or RE-GI38HG connecting cord.
