SONY Stereo Active Speaker System S RS-N1 Operating Instructions Before operating the system, please read this manual thoroughly and retain it for future reference. Owner’s Record The model and serial numbers are located at the bottom of the wooer module. Record the serial number in the space provided below. Refer 1o them whenever you call upon your Sony dealer regarding this product. Model Serial No.
WARNING CAUTION ASK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER {OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended 1o alert the user to the presence of insulated ** collage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Connections . Attaching the Full-range Speakers Mount the full-range speakers 1o the woofer mauled. 1 Almach the joint of the full-range speaker ams 1o the wooer module by matching 1 joint and the rectangle holes on the wooer module. Be sure {0 connect them firmly, 2 Tighten the arm fixing screws. 3 Connect the plugs of the speaker cords 1o the speaker terminals on the woofer module.
Connections Notes on the Insulators Use the supplied insulators when you place the portable equipment such as Disc man on 1op of the wooer iodide. Attach the supplied insulators on the top side of the woofer module as lust rated, When you place equipment such as a Disc man etc. Attach the insulators with their projecting parts pointing outwards. When you place equipment such as a Mini Disc player etc.
Connecting to an RCA Pin Jack = CD player, cassette deck Invigorating cord ete, {not supplied) Note When two types of audio equipment are connected 10 the system equipment is always muted off. When you connect only one audio (with the supplied connecting cord and the optional connecting cord) equipment, make aura that the conditioning cord not being used is and are played at the same time, the sours from both of them will disconnected Prom the system. Otherwise, it may cause some noise.
0 lo-1g: ey} Fulfilling speakers Walnut. 1 Receptor more outset penetrating the Re mate Commander ] Freshet POWER switch 1o turn on the shyster, (Be sure to fum on the connected equipment before operating this switch.) “The power indicator lights up. 2 Adjust the volume on the full-tangs speakers and woofer with the VOLUME contort. Tum clockwise (1o MAX) lo increase. Adjust the volume of tha connected equipment 1o your preference in advance. 3 Staci the bass with the BASS control.
i CD player or Disc man operation buttons Note Tha supplied remote commander is designed for operating the Sony CD players and Di scan only.
Troubleshooting Guide Solution No sound » Conn act the AC plug 1o the AC outset. + Press the POWER switch. « Tum up the volume of the system. + Turn up the volume on the connected equipment. « Connect the speaker cord and connecting cord securely, + Operate the connected equipment correctly, No found from one speaker monaural earphone jack. » Connect the speaker cord and connecting cord securely. » Connect the connecting cord with & plug adapter {mini plug «» stereo mini jack) (not supplied} to a Weak bass.
